I am looking to get into modding and am in the market for some parts to practice with: LEDs to practice reflowing, maybe some Convoy hosts and basic drivers, etc. Thought I might ask here before I put an order in at Mountain. If you have any junk to get rid of let me know. Thanks!
How about an electronic one? Folomov edc c4? I can include mod stuff but I don’t have an eswitch driver if you want to swap that.
You’re in luck, I want to clean out my mod’ing drawer. I will see what LEDs, stars, drivers, I have. And I have a BLF A6 that needs a driver replacement.
Definitely interested! I sent you a PM, let me know what you have available. I will surely take the A6 at least.
Check it out
First up is the MCPCBs, LEDs, and a TIR lens
- This is real gem. It’s from MtnElectronics, and it’s a 3 Nichia 219b 90+ CRI on a Noctigon Triple… aka “(3) Nichia NVSL219BT D220 4000K 90+ CRI LEDs on 20mm 3XP Copper Noctigon + Pre-Bridged” (paid $13)
- Cree XM-L2 3000K CRI 80+ on Noctigon (paid $5 + $3)
- A brand new, factory sealed Cree XM-L2 3000K CRI 80+ (paid $5)
- Latticebright star and XM-L2 sized Chinese LED (paid ?)
- XM-L2 sized Chinese LED (paid ?)
- TIR lens (paid ?)
Next is a brand new, never used, Intel cooler for bench-testing LEDs (without cooling LEDs burn up fast)
- 12v Intel cooler with solder paste factory applied (paid $9)
- Replacement thermal paste (paid $8 new, but it’s not full anymore)
And some AA flashlights that work like new… Chinese new. haha
- pair of UtraFire Zoomies (paid ?)
- travel charger. I love gutting these and using them to ‘wire’ up an 18650 for bench use. (paid ?)
And a good looking BLF A6
- BLF A6 with XPL-3D (5000K) emitter. It hasn’t seen any EDC use, and it Turbo’s great. But the driver needs replacement so the turbo timeout and low-voltage-protection will work again.
And a USB programmer. You probably thing you can’t do this, but BLF is very helpful, and you don’t need to know coding for some simple stuff.
- USBASP V2.0 (paid $8?)
And 2 zoomies and 2 batteries, pimped out with MtnElectronics Drivers, LEDs, and Noctigon Stars. Comes with the old driver and LED/star you see too.
Paid $75 for batteries and mods.
And a 40W variable power Weller solder station
- Weller WLC100 40-Watt Soldering Station ($35)
So that’s almost exactly $175 worth of value for everything listed.
I’d be happy with getting $90. And you are saving way more than $85 because you will not need to pay a dozen shipping fees to get all this stuff elsewhere.
I missed some stuff in the last post and had to edit it. Please refresh and have another look.