How did ppl get it for $50? I ordered it with an SP10S and paid Ā£51.48 ($66.15). I applied the new user discount any other coupons I could including the 11:11 code.
There should be a more accurate manual, and some minor firmware differencesā¦ but with the way these things seem to go, there is no telling what differences you may find.
Yep. There are many examples of that sort of disaster happening. The citrus industry in Florida is threatened with a wipeout because of some disease that they figure was brought here by someone illegally importing some orange tree cuttings. In the past, we also made the problem ourselves by importing a species of something that was supposed to be the cure for some other problem.
Maybe because 3450 mAh is not a round number? I have a bunch of these cells and even after repeated abuse 99 % of them still measure 3450 mAh Ā± 30 mAh. I would have called them 3400 mAh just because but hey. All manufactures mAh ratings are lies if you ask me because the testing is done at such low amperage and measured down to 2.5 volts. The NCR18650GA is my go to when non protected 10 amp and or high capacity cells are needed.
Iām partial to them too. Theyāre going to be my Go-To for ālowā power lights like the A6, SC31, etc.
I like how the factory believes in āunder-promise and over-deliver.ā If you look at their spec sheets, theyāre only rated as 3300, yet are expected to have a minimum capacity of 3350 and a typical rating of 3450. I can respect their modest promises. Like you, I am even OK with them being advertised as 3400. After that, itās just a slippery slope that leads to calling them GIF 9900 or UltroFire 5800.
I find it very interesting that not one person has posted about another delay for those on the list in acquiring this lantern? This time something about them not being able to get the LEDsā¦ It was stated that this would be another month, or more! Iām sure that takes us into Chinese New Yearsā¦. so weāre most likely looking at many more months. Yea, It bothers me, because the lantern has excellent reviews and who isnāt anxious to get theirs, itās been a while
I donāt know why there isnāt some Manufacturer rep who can be transparent with us, except that isnāt normal behavior for a human being. You simply canāt fault honesty.
Meanwhile Iāll just continue to look at the posts of those who have already received their lanterns.
(wouldnāt change anything, but would like to know how it happened that THEY cannot get LEDs now)
āitā happens when youāre a dealing with small-ish wholesale quantities of products that are run in batches
Personally, Iām happy that they bothered letting us know of the delay, and even shared why things are being delayed. It was easy to be patient when there was no real ETA on this. Now that things have started and the finish line is in sight, itās getting harder.
From what information we been told & can gather now, the 2nd batch release will be closer to the end of the month. It appears that because of the massive order for the LH351D LEDs they need to manufacture them to shore-up the number needed. (of its 2500 GB LT1ās, that equals to 10,000 2700K and 10,000 5000K LED units they need, iām guessing there wasnāt that many produced yet.