Emisar D1sV2 respectively Noctigon K1

Yes, that is red and green main LED, there is no aux LED on the K1.

Does the switch have RGB LED in these lights?

Yes, it does. the switch back light behaves as the aux LED.

I see that there are aux LEDs directed towards the optics. Now you say there’s another in the switch…
Are those sets addressable individually or do they always behave the same (on hardware and software level)?

I have the D4V2 Ti.

The LEDs in the switch are white only. They do not change colors with the bezel aux LEDs.

  1. There is no aux LEDs in the K1.
  2. There is RGB in the switch.

Yes, the button displays battery voltage while the light is on.

While the main light is off, the button acts as a RGB aux LED.

I have seen the LIGHT! Do these have aux lighting as well!? I am waiting with cash in hand. Great job, these are beautiful torches. I just got my Cyan D4SV2 a couple weeks ago and love it. :smiley:

No AUX leds , Hank said 2 posts ago

Same. I planning on getting the new SBT90.2 FT03 but I’d much rather get this if it comes with that led. Always had a bad experience with Astrolux’s (Mateminco) QC. Every light has arrived with some kind of issue. If I’m paying for such an expensive LED I want it to last and not come with any problems. Also I need a reason to buy it cause it looks too cool.

I would not hesitate to pay $90 for the K1 with a SBT90.2, night watch and astrolux options are$70. But then it wouldn’t be branded as noctigon but emisar instead. Would make an insane performing flashlight for sure.

The K1 SBT90.2 will have a massive beam… :+1: FT03 90.2 swap…

How much Kcd? Also how much was the original.

The FT03 SST40 version on stock does about 225 kCd

I know but everyone’s measurements are different. I want to see his numbers for both so I can see the percentage increase in throw.

I am in.
One nutter Fanboy of Emisar,
Emissary of hawt lights. :sunglasses:

Let the 2019 Xmas night shine! On, and on. And on?

OK. New Year’s? :smiling_imp:

Will buy one.

What is colored emitters red and green use for in throws?

Hunting. I don’t know what else?

I have no real use for a thrower like this but Emisar/Noctigon is my favorite manufacturer so I will grab one.

Is the drive current for the white flats on the NOW FOR SALE Noctigon K1:
5A for the 1mm² CSLNM1.TG
8.5A for the 2mm² CSLPM1.TG

Or thereabouts?