WTS: Misc Hosts.

I need to downsize, and I’ve reluctantly concluded that I need to let go of my flashlight modding parts starting with my collection of unused hosts.

No reasonable offer refused for one, some, or all. US Only. Shipping for a single host looks like it is about $3.50-4.00 via First Class parcel.

SOLD 1x Convoy S2+ host, OP reflector, rubber switch boot.
3x uTorch tubes host-only, no driver or emitter. OP reflectors, brass pill construction.

1x 18650 host with aluminum pill. I’ve built a few lights with these and I think they are a good, inexpensive host, which is why I have this unused one.

1x 18650 tube-light host. The reflector makes a ringy beam, but it would make a decent host for an optic.

SOLD 1x Sofirn triple-reflector C8F-21700 version with extra mcpcb.
SOLD 1x UF13 26650 host
SOLD 1x 26650 e-switch host. This host is from a clone of a Supfire L5. There is a small scratch (pictured) through the anodizing.
SOLD 1x Thorfire C8s. This is an functioning, unused light. It’s the older style host with an aluminum pill but heat dissipation is quite good.
SOLD 2x Utorch UT01. These are intact lights with the flakey UT01 driver. They’ve seen a bit of use. These are probably only useful to someone who likes to make tiny drivers.
SOLD 1x Eagle Eye x6 One of my personal favorite hosts.

PM me if you are interested.

Please let me know if you have any questions.

do the utorch hosts have a shelf or a pill?

The utorch hosts have a screw in brass pill, much like the Convoy s2+

Offer PM’d

C8F-21700 host sold, x6 host sale pending.

Added a bit more information.

UT01s sold!

S2+ sold and C8s, both sold to lucky customers! :slight_smile:

Eagle Eye X6 is back on the market.

Both 26650 hosts sold.

Probably should have picked up that Eagle Eye as well. I’m new here. I didn’t realize it was the basis for the BLF X6. There are some neat mods for it.

Received the UF-13 & Comunite. Everything was well packaged, the spare parts were included, and the flashlight heads had cardboard protectors to protect the bezel and lens. The UF was of better quality than I expected from UltraFire, and the Comunite is a step above that. It’s a beast, with a thick-walled aluminum body. Perfect for soaking up heat.

Thanks eas!

Glad it suited you, Photonica.

X6 sold.