MascaratumB’s entry – Old Lumens Contest 2019 - Modified Light Category [FINISHED on 8th February 2020]

91 posts / 0 new
Last post

Pages

MascaratumB
MascaratumB's picture
Offline
Last seen: 10 hours 47 min ago
Joined: 10/29/2016 - 12:12
Posts: 4934
Location: Portugal
MascaratumB’s entry – Old Lumens Contest 2019 - Modified Light Category [FINISHED on 8th February 2020]

Finished mod photo!

PRESENTATION
Hi BLF!

So… I don’t have the skills and / or tools to enter the categories “Machine Made” or the “Hand Made” lights in this year’s Old Lumens Flashlight Modders & Builders Challenge 2019.

But, as this year’s competition has a “Modified Light Category”, I decided that I will enter and (try) do something!

If everything goes well, by the end of the deadline I should be able to present a modified flashlight.

I don’t foresee an extreme mod (don’t expect much from me!!!) nor a very technical one, but I’ll do my best to honor all the people building and modding lights in this forum, in this competition and in the “flashaholics’ world”!

More than that, knowing a little bit of Justin’s (Old Lumens) work and mods, I’ll just do my best to honor his legacy make the light work again after the mod Big Smile Innocent

_____________________________________________________

This is how I’ll organize myself:

Post #1Presentation + Starting Point + Modding Plan

Post #5Evolution of the flashlight modification (with photos and text for each “phase” in a bottom-up evolution/ sequence)

Other posts – Well, whenever I do something new, I’ll make a new post and I’ll channel the updates onto the post #5, to have a place where all the information is gathered. Latest updates will be in the top of the post #5

Please, don’t expect too much from this! Just have fun, and… try to learn from my mistakes Big Smile

DISCLAIMER 1 : Oh, as you can see in this thread this mod is a “long-time” intention that I hope to concretize now Innocent

_____________________________________________________

STARTING POINT

AIM: turn an Amutorch VG10 into a Quad flashlight

The flashlight was reviewed here: http://budgetlightforum.com/node/61295

MODDING PLAN

This flashlight currently has: How I want it to be?
– Forward Tail Switch
- Black rubber tailcover
- 4 + 1 mode UI (L-M-H-T + SOS, w/ memory)
- 23 mm driver (chips on top, long spring below, brass ring on the edges)
- XML2 U4-1A Led (Cool White)
- Smooth reflector
- Non AR Coated Lens
- Detachable Pocket clip (reversible, not deep carry)
- “Tactical” ring
– Forward Tail Switch
- Orange or Green tail cover
- Bistro UI
- 22 mm driver
- 4 x Samsung LH351D 5000K 90 CRI or 4 Luxeon V 4000K 70CRI
- Noctigon or Led4power MCPCB (respectively)
- Carclo 10622 or 10621
- Titanium Stainless Steel screwed in pocket clip
- Leather handle
- Glowing gasket
- GITD piece inlaid in the tailcap
- some extras to be thought Silly

This is also a table to let you know the materials I will be ordering/using, suppliers, and amounts involved (to be shown later …) Silly
Other stuff not mentioned here, I may already have it or I may add it later! I’ll update the table when needed!

Material Status Supplier Price
Samsung LH351D Will not be used in this mod! Received AEDe 6€ (4 × 1,50€)
22mm Driver with Bistro Received Lexel ~13€
Tritium Vial Received AliExpress 7,63€
UV Glue (and 9 leds UV flashlight) Received AliExpress 5,39€
Brass pill + ring Received kiriba-ru 10€
Carclo 10622 Received kiriba-ru 1,50€
Quad Noctigon MCPCB Received kiriba-ru 3€
Luxeon V on L4P MCPCB Received led4power 17€
Pocket clip Received AliExpress 8,49€
GITD Quad Gasket + GITD tube Received CRX ~10€
Leather
Needles
Thread
Bought local shoe cobbler and haberdashery ?
1,80€
?

DISCLAIMER 2: as the things will take a while to arrive, this thread may be “still” for a while in what concerns “modding action”! Still, feel free to post comments or questions!

Thanks for watching and good luck to all competitors!

And thanks to the OL Contest Team for putting this together!! Beer Thumbs Up

[REVIEWS] ACEBEAM: H20 / TK16 // AMUTORCH: S3 / S3 vs 219c / AM30 / AX1 / VG10 // BLITZWOLF: BW-ET1 // BRINYTE: T28 // DQG: AA Slim Ti // FIREFLIES: ROT66 GEN II // HC-LIGHTS: SS AAA // KLARUS: XT1C // LIVARNOLUX: 314791 // LUMINTOP: Tool AA V2.0 + Tool 25 // NITEFOX: UT20 / ES10K / K3 // ODEPRO: KL52 / B108 // OLIGHT: M2R Warrior // ON THE ROAD: M1 / i3 / M3 Pro // ROVYVON: A2 + A5R / E300S / A8 // SKILHUNT: M150 / M200 // SOFIRN: SF14 + SP10A / SP32A / SP10B // WUBEN: TO10R / E05 / T70 / E10 / TO50R / E19 // XTAR: PB2 Charger // Tricks: 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 // TIR: 1 / 2 // Others: Biscotti 3 + 1*7135 / Triple TIR w/ XP-G2 /// My Collection /// My Review's Blog (PT) /// OL Contest 2019 /// GIVEAWAY: 1 / 2

Edited by: MascaratumB on 02/08/2020 - 10:39
korpzgrinda
korpzgrinda's picture
Online
Last seen: 5 min 52 sec ago
Joined: 01/09/2017 - 16:52
Posts: 392
Location: Eastern Woodlands in the Wilderness of North America

Great idea! I have pondered turning a Thorfire VG-10 into a quad, so it will be nice to check out your progress and gain some knowledge on the process. Good luck to you!

CRX
CRX's picture
Offline
Last seen: 20 min 45 sec ago
Joined: 04/02/2013 - 15:27
Posts: 4175
Location: Scotland

Happy you’re taking part Thumbs Up

- LEDs & Other Stuff -  - UI CheatSheets -  - CRX Mods & Builds -  - Stuff for Sale -CRX Hand Made FlashlightsThe only place that fear can exist is in our thoughts of the future.
It is a product of our imagination causing us to fear things that do not presently and may never exist. Fear is a choice.

MascaratumB
MascaratumB's picture
Offline
Last seen: 10 hours 47 min ago
Joined: 10/29/2016 - 12:12
Posts: 4934
Location: Portugal

korpzgrinda wrote:
Great idea! I have pondered turning a Thorfire VG-10 into a quad, so it will be nice to check out your progress and gain some knowledge on the process. Good luck to you!

Thanks! Well, it is not a revolutionary idea, but will be a nice mod to do, specially because it is a thing I’ve been wanting for a while Wink
There are some nice examples of quad VG10s around, and I hope this one ends up well!

Major difficulty will be with the driver, I guess,but I’ll need to have it in hands to perceive it if it will fit well or not! Silly

Thanks again and in case you decide to do the mod, good luck too Wink

CRX wrote:
Happy you’re taking part Thumbs Up

Thanks mate Wink
Let’s see how this goes! It will not be a Fritz quad, but hope it will end up well Wink
Thanks!

[REVIEWS] ACEBEAM: H20 / TK16 // AMUTORCH: S3 / S3 vs 219c / AM30 / AX1 / VG10 // BLITZWOLF: BW-ET1 // BRINYTE: T28 // DQG: AA Slim Ti // FIREFLIES: ROT66 GEN II // HC-LIGHTS: SS AAA // KLARUS: XT1C // LIVARNOLUX: 314791 // LUMINTOP: Tool AA V2.0 + Tool 25 // NITEFOX: UT20 / ES10K / K3 // ODEPRO: KL52 / B108 // OLIGHT: M2R Warrior // ON THE ROAD: M1 / i3 / M3 Pro // ROVYVON: A2 + A5R / E300S / A8 // SKILHUNT: M150 / M200 // SOFIRN: SF14 + SP10A / SP32A / SP10B // WUBEN: TO10R / E05 / T70 / E10 / TO50R / E19 // XTAR: PB2 Charger // Tricks: 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 // TIR: 1 / 2 // Others: Biscotti 3 + 1*7135 / Triple TIR w/ XP-G2 /// My Collection /// My Review's Blog (PT) /// OL Contest 2019 /// GIVEAWAY: 1 / 2

MascaratumB
MascaratumB's picture
Offline
Last seen: 10 hours 47 min ago
Joined: 10/29/2016 - 12:12
Posts: 4934
Location: Portugal

FINAL UPDATE #11 – 8th February 2020

For more details, see this post

The process of modding the Amutorch VG10 is now finalized!

This is a comparison between my initial modding aims and the final configuration Silly
Here:

This flashlight was: How I wanted it to be? What it is!
– Forward Tail Switch
- Black rubber tailcover
- 4 + 1 mode UI (L-M-H-T + SOS, w/ memory)
- 23 mm driver (chips on top, long spring below, brass ring on the edges)
- XML2 U4-1A Led (Cool White)
- Smooth reflector
- Non AR Coated Lens
- Detachable Pocket clip (reversible, not deep carry)
- “Tactical” ring
1- Forward Tail Switch
2- Orange or Green tail cover
3- Bistro UI
4- 22 mm driver
5- 4 x Samsung LH351D 5000K 90 CRI or 4 Luxeon V 4000K 70CRI
6- Noctigon or Led4power MCPCB
7- Carclo 10622 or 10621
8- Titanium Stainless Steel pocket clip
9- Leather handle
10- Glowing gasket
11- GITD piece inlaid in the tailcap
12- some extras to be thought Silly
1- DONE
2- DONE (Orange)
3- DONE (configured on mode 9)
4- DONE
5- DONE (Luxeon V)
6- DONE (led4power)
7- DONE (Carclo 10622)
8- DONE
9- DONE (call it “sleeve”)
10- DONE
11- DONE (orange tritium vial)
12- DONE (copper bead + lanyard, wood support, holster)

Some photos:

Beam Profile!

The luminosity evolution Wink

In the wood support Big Smile

And now, some glamour photos of the set! Love

Thanks for the all the comments and tips given here, and thanks for the opportunity to participate in the Old Lumens Flashlight Modders & Builders Challenge 2019 !

______________________________________________________________________

Update #11 – 6th February 2020

For more details, see this post

From CRX arrived a GITD gasket and a GITD tube and as soon as I got them I installed them Party

The installation took me a while because the optics were not fitting the MCPCB very well, so I has to pull the MCPCB up, install the optic + gasket, and then “unglue” the driver to pull the wires down again. Then I mounted the head and glued the driver again Wink

I also installed the GITD tube in the holster adding an extra piece of thinner “paracord” in 2 empty holes. I opted to put it in that place because it will help me on locating the holster if needed.

______________________________________________________________________

Update #10 – 4th February 2020

For more details, see this post

I made a holster for this light!
I also attached the lanyard to the clip Wink


______________________________________________________________________

Update #9 – 29th January 2020

For more details, see this post

This week arrived another piece for this flashlight!
The clip Wink

______________________________________________________________________

Update #8 – 27th January 2020

For more details, see this post

Did some more work during the weekend!

1) made a bead for the lanyard (and started to make the lanyard)

2) made a leather cover for the tube and part of the head

3) put some varnish on the wood support

______________________________________________________________________

Update #7 – 22nd January 2020

For more details, see this post

The Luxeon V 4000K 70CRI on a quad mosX from led4power arrived and I soldered the driver wires to MCPCB.
The soldering process was a bit hard, I guess I need a new soldering iron tip Oops Or maybe it was due to my lack of technique to solder them perfectly Big Smile
I used 3 pieces of cork to lift the MCPCB a little bit to make ir easier to solder the wires! This can be my registered technique from now on Silly Grad
Below the MCPCB I applicate thermal paste. When mounted…it worked Party

After soldering everything I also drilled 2 “holes” in the pill through the back, using the shelf’s holes, in order to fix the pill with the 2 original screws that were holding the original Led MCPCB. This made it easier to fix the driver with UV glue (thanks for the tip Skylight!)

______________________________________________________________________

Update #6 – 20th January 2020

For more details, see this post

Some more updates from the last days!
Last Friday I received the copper pill + brass ring + optics (+ noctigon quad MCPCB) from kiriba-ru!
So, I gave it a try to mount everything in the flashlight’s head, in a provisory way, specially to check dimensions and fiting.

Please note that the Noctigon MCPCB will most probably NOT be used in the build, as I am waiting for a led4power MCPCB with 4 Luxeon V Leds installed.

Below I will show the pill’s and ring’s dimensions and the “experimental” mounting of these elements.

Mounting it up and…. Oops
As the Noctigon MCPCB is tall, there is a gap when everything is mounted. I believe this gap will be reduced or even extinguished when the led4power is put onto the pill, still, I had to file the bottom of the pill a little bit reding in about 1mm. Later i will see if it works properly

I also had to modify the head, creating a hole in the center of the shelf to allow the driver’s wires to pass. I used my Parkside drill and some bits to help me on that! That shelf is thick Tired

As mentioned on the post, I solderd 4 leds onto the MCPCB.
I used solderding iron and electric stove. I don’t have solder paste, so I had to use solder wire and the clean/add/clean…. in order to fill the spaces for the leds to reflow correctly.

______________________________________________________________________

Update #5 – 15th January 2020

For more details, see this post

Some stuff arrived this week and some work have been done in the flashlight and the wood support Wink
I’ll present it below!

WOOD SUPPORT
I decided I would do something more to the wood support, so I picked my pencil, the pyrography pen and some different tips and did this:

FLASHLIGHT
I just installed the orange tritium vial.

______________________________________________________________________

Update #4 – 10th January 2020

For more details, see this post

This week I received another component for this mod: the DRIVER!

This is a 22mm driver, double sided from Lexel, with Bistro OTSM Firmware.
As I still don’t have the pill, the optics nor the LEDs to complete the MOD, I just experimented the Driver to check if it worked fine, specially due to the differences in diameter and “architecture” if compared to the original driver.

a) Installing the spring and wire in the driver (tinned the bottom and the spring with some solder and then installed)

b) How it looks in a provisory way

______________________________________________________________________

Update #3 – 12th December 2019

For more details, see this post

I had some time tonight and made a little bit of the flashlight mod! The first and most insignificat part Big Smile
I replaced the rubber cap!
The original was a black one, and I put an orange one. I had to cut some pieces of the orange rubber cap to make it fit above the switch and white spacer.
Below you find the photos of how the light is composed in the tailcap and the “mod”.


______________________________________________________________________

Update #2 – 12th December 2019

For more details, see this post !

Filing, drilling, escavating the wood.

This is it’s current state! My aim is now to drill/file the bigger hole and make it even! That will be a “light window” Wink

______________________________________________________________________

Update #1 – 6th December 2019

For more details, see this post !
Got some materials and made the first work for this mod!

Materials

Sawing the wood piece

After sawing for a while…I got this, and I got the first casualty in this mod Silly

[REVIEWS] ACEBEAM: H20 / TK16 // AMUTORCH: S3 / S3 vs 219c / AM30 / AX1 / VG10 // BLITZWOLF: BW-ET1 // BRINYTE: T28 // DQG: AA Slim Ti // FIREFLIES: ROT66 GEN II // HC-LIGHTS: SS AAA // KLARUS: XT1C // LIVARNOLUX: 314791 // LUMINTOP: Tool AA V2.0 + Tool 25 // NITEFOX: UT20 / ES10K / K3 // ODEPRO: KL52 / B108 // OLIGHT: M2R Warrior // ON THE ROAD: M1 / i3 / M3 Pro // ROVYVON: A2 + A5R / E300S / A8 // SKILHUNT: M150 / M200 // SOFIRN: SF14 + SP10A / SP32A / SP10B // WUBEN: TO10R / E05 / T70 / E10 / TO50R / E19 // XTAR: PB2 Charger // Tricks: 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 // TIR: 1 / 2 // Others: Biscotti 3 + 1*7135 / Triple TIR w/ XP-G2 /// My Collection /// My Review's Blog (PT) /// OL Contest 2019 /// GIVEAWAY: 1 / 2

pinkpanda3310
pinkpanda3310's picture
Offline
Last seen: 12 hours 37 min ago
Joined: 12/28/2013 - 08:45
Posts: 2571
Location: Perth

I like the table of materials and how most of the suppliers are blf members Thumbs Up

Looking forward to the build Smile

MascaratumB
MascaratumB's picture
Offline
Last seen: 10 hours 47 min ago
Joined: 10/29/2016 - 12:12
Posts: 4934
Location: Portugal

pinkpanda3310 wrote:
I like the table of materials and how most of the suppliers are blf members Thumbs Up

Looking forward to the build Smile

Thanks pinkpanda! Well, that’s a think that will help me to organize myself and that will also let people follow the path! It will not be a big thing but I thought it would be nice!

And yes, I tried to value the community skills and products, as they have the “answers” for my “needs” in this mod Wink

I may be bothering them with this, but it is a way to value their work!!

Thanks to all of them too Smile

[REVIEWS] ACEBEAM: H20 / TK16 // AMUTORCH: S3 / S3 vs 219c / AM30 / AX1 / VG10 // BLITZWOLF: BW-ET1 // BRINYTE: T28 // DQG: AA Slim Ti // FIREFLIES: ROT66 GEN II // HC-LIGHTS: SS AAA // KLARUS: XT1C // LIVARNOLUX: 314791 // LUMINTOP: Tool AA V2.0 + Tool 25 // NITEFOX: UT20 / ES10K / K3 // ODEPRO: KL52 / B108 // OLIGHT: M2R Warrior // ON THE ROAD: M1 / i3 / M3 Pro // ROVYVON: A2 + A5R / E300S / A8 // SKILHUNT: M150 / M200 // SOFIRN: SF14 + SP10A / SP32A / SP10B // WUBEN: TO10R / E05 / T70 / E10 / TO50R / E19 // XTAR: PB2 Charger // Tricks: 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 // TIR: 1 / 2 // Others: Biscotti 3 + 1*7135 / Triple TIR w/ XP-G2 /// My Collection /// My Review's Blog (PT) /// OL Contest 2019 /// GIVEAWAY: 1 / 2

MascaratumB
MascaratumB's picture
Offline
Last seen: 10 hours 47 min ago
Joined: 10/29/2016 - 12:12
Posts: 4934
Location: Portugal

Update #1 – 6th December 2019

Yesterday I got some information about the pill + ring and driver.
Pill & Ring will be done/sent to me within the next 2 weeks;
Driver will probably be sent within the next week, depending on Lexel’s workload.

I also managed to find some stuff I needed to the mod “outside” the flashlight. I went to shoe cobbler here in the city and they sold me some leather and waxed thread for the handle. I also got a needles kit.
Fortunately, yesterday I also managed to get a piece of wood for an eventual extra within the scope of the flashlight mode. There was some tree maintenance near the place where I work and I managed to get a “good” piece of wood! It is still to be assessed if it will be good or not as I work on it. I may need to pick another type of wood for what I need…

I’ve worked on it for a while with the available tools (hacksaw and my Sanrenmu knife, and gloves, of course).
Here are the things I got and the work I’ve done so far!

Materials

Sawing the wood piece

After sawing for a while…I got this, and I got the first casualty in this mod Silly

————————————-

Lesson 1: try to saw with appropriate tools Glasses
Lesson 2: use adequate materials for the things you want to do… Oops

Stay tunned for the next episodes Wink

[REVIEWS] ACEBEAM: H20 / TK16 // AMUTORCH: S3 / S3 vs 219c / AM30 / AX1 / VG10 // BLITZWOLF: BW-ET1 // BRINYTE: T28 // DQG: AA Slim Ti // FIREFLIES: ROT66 GEN II // HC-LIGHTS: SS AAA // KLARUS: XT1C // LIVARNOLUX: 314791 // LUMINTOP: Tool AA V2.0 + Tool 25 // NITEFOX: UT20 / ES10K / K3 // ODEPRO: KL52 / B108 // OLIGHT: M2R Warrior // ON THE ROAD: M1 / i3 / M3 Pro // ROVYVON: A2 + A5R / E300S / A8 // SKILHUNT: M150 / M200 // SOFIRN: SF14 + SP10A / SP32A / SP10B // WUBEN: TO10R / E05 / T70 / E10 / TO50R / E19 // XTAR: PB2 Charger // Tricks: 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 // TIR: 1 / 2 // Others: Biscotti 3 + 1*7135 / Triple TIR w/ XP-G2 /// My Collection /// My Review's Blog (PT) /// OL Contest 2019 /// GIVEAWAY: 1 / 2

pinkpanda3310
pinkpanda3310's picture
Offline
Last seen: 12 hours 37 min ago
Joined: 12/28/2013 - 08:45
Posts: 2571
Location: Perth

Oh. My. Goodness. This is not the build I was expecting Glasses

MascaratumB
MascaratumB's picture
Offline
Last seen: 10 hours 47 min ago
Joined: 10/29/2016 - 12:12
Posts: 4934
Location: Portugal

pinkpanda3310 wrote:
Oh. My. Goodness. This is not the build I was expecting Glasses

Ahah, don’t expect too much, this all may end up wrong Silly

[REVIEWS] ACEBEAM: H20 / TK16 // AMUTORCH: S3 / S3 vs 219c / AM30 / AX1 / VG10 // BLITZWOLF: BW-ET1 // BRINYTE: T28 // DQG: AA Slim Ti // FIREFLIES: ROT66 GEN II // HC-LIGHTS: SS AAA // KLARUS: XT1C // LIVARNOLUX: 314791 // LUMINTOP: Tool AA V2.0 + Tool 25 // NITEFOX: UT20 / ES10K / K3 // ODEPRO: KL52 / B108 // OLIGHT: M2R Warrior // ON THE ROAD: M1 / i3 / M3 Pro // ROVYVON: A2 + A5R / E300S / A8 // SKILHUNT: M150 / M200 // SOFIRN: SF14 + SP10A / SP32A / SP10B // WUBEN: TO10R / E05 / T70 / E10 / TO50R / E19 // XTAR: PB2 Charger // Tricks: 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 // TIR: 1 / 2 // Others: Biscotti 3 + 1*7135 / Triple TIR w/ XP-G2 /// My Collection /// My Review's Blog (PT) /// OL Contest 2019 /// GIVEAWAY: 1 / 2

MRsDNF
MRsDNF's picture
Offline
Last seen: 4 hours 54 min ago
Joined: 12/22/2011 - 21:18
Posts: 13307
Location: A light beam away from the missus in the land of Aus.

I’m looking forward to your mod MB. Beer

 

djozz quotes, "it came with chinese lettering that is chinese to me".

                      "My man mousehole needs one too"

old4570 said "I'm not an expert , so don't suffer from any such technical restrictions".

Old-Lumens. Highly admired and cherished member of Budget Light Forum. 11.5.2011 - 20.12.16. RIP.

 

MascaratumB
MascaratumB's picture
Offline
Last seen: 10 hours 47 min ago
Joined: 10/29/2016 - 12:12
Posts: 4934
Location: Portugal
MRsDNF wrote:
I’m looking forward to your mod MB. Beer

Thank you MRsDNF! Wink
Will update some things soon, although not much from the flashlight itself Silly

[REVIEWS] ACEBEAM: H20 / TK16 // AMUTORCH: S3 / S3 vs 219c / AM30 / AX1 / VG10 // BLITZWOLF: BW-ET1 // BRINYTE: T28 // DQG: AA Slim Ti // FIREFLIES: ROT66 GEN II // HC-LIGHTS: SS AAA // KLARUS: XT1C // LIVARNOLUX: 314791 // LUMINTOP: Tool AA V2.0 + Tool 25 // NITEFOX: UT20 / ES10K / K3 // ODEPRO: KL52 / B108 // OLIGHT: M2R Warrior // ON THE ROAD: M1 / i3 / M3 Pro // ROVYVON: A2 + A5R / E300S / A8 // SKILHUNT: M150 / M200 // SOFIRN: SF14 + SP10A / SP32A / SP10B // WUBEN: TO10R / E05 / T70 / E10 / TO50R / E19 // XTAR: PB2 Charger // Tricks: 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 // TIR: 1 / 2 // Others: Biscotti 3 + 1*7135 / Triple TIR w/ XP-G2 /// My Collection /// My Review's Blog (PT) /// OL Contest 2019 /// GIVEAWAY: 1 / 2

MascaratumB
MascaratumB's picture
Offline
Last seen: 10 hours 47 min ago
Joined: 10/29/2016 - 12:12
Posts: 4934
Location: Portugal

During the last days I made some more “woodwork!!! This isn’t complete yet!
For those wondering what this will “eventually” be, it will be a flashlight support that I intend to use in 2 different ways!
When it is done, I will join check if it is indeed viable to use it and I will shown its purpose in the overal mod Wink

Not having proper tools, this is what I’ve done using what I have and that is show in the photos.
Filing, drilling, escavating the wood.
In the last photos you’ll see that the woodpiece has a whole. Well, there was a “knot” there that I ‘had to’ escavate to avoid some aesthetic malfunction and it was also in purpose to use the wood for my second purpose that I will show later;)



This is it’s current state! My aim is now to drill/file the bigger hole and make it even! That will be a “light window” Wink

Stay tunned Silly

[REVIEWS] ACEBEAM: H20 / TK16 // AMUTORCH: S3 / S3 vs 219c / AM30 / AX1 / VG10 // BLITZWOLF: BW-ET1 // BRINYTE: T28 // DQG: AA Slim Ti // FIREFLIES: ROT66 GEN II // HC-LIGHTS: SS AAA // KLARUS: XT1C // LIVARNOLUX: 314791 // LUMINTOP: Tool AA V2.0 + Tool 25 // NITEFOX: UT20 / ES10K / K3 // ODEPRO: KL52 / B108 // OLIGHT: M2R Warrior // ON THE ROAD: M1 / i3 / M3 Pro // ROVYVON: A2 + A5R / E300S / A8 // SKILHUNT: M150 / M200 // SOFIRN: SF14 + SP10A / SP32A / SP10B // WUBEN: TO10R / E05 / T70 / E10 / TO50R / E19 // XTAR: PB2 Charger // Tricks: 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 // TIR: 1 / 2 // Others: Biscotti 3 + 1*7135 / Triple TIR w/ XP-G2 /// My Collection /// My Review's Blog (PT) /// OL Contest 2019 /// GIVEAWAY: 1 / 2

CRX
CRX's picture
Offline
Last seen: 20 min 45 sec ago
Joined: 04/02/2013 - 15:27
Posts: 4175
Location: Scotland
Smile Thumbs Up

- LEDs & Other Stuff -  - UI CheatSheets -  - CRX Mods & Builds -  - Stuff for Sale -CRX Hand Made FlashlightsThe only place that fear can exist is in our thoughts of the future.
It is a product of our imagination causing us to fear things that do not presently and may never exist. Fear is a choice.

MascaratumB
MascaratumB's picture
Offline
Last seen: 10 hours 47 min ago
Joined: 10/29/2016 - 12:12
Posts: 4934
Location: Portugal

CRX wrote:
Smile Thumbs Up
Beer Glasses Cool

[REVIEWS] ACEBEAM: H20 / TK16 // AMUTORCH: S3 / S3 vs 219c / AM30 / AX1 / VG10 // BLITZWOLF: BW-ET1 // BRINYTE: T28 // DQG: AA Slim Ti // FIREFLIES: ROT66 GEN II // HC-LIGHTS: SS AAA // KLARUS: XT1C // LIVARNOLUX: 314791 // LUMINTOP: Tool AA V2.0 + Tool 25 // NITEFOX: UT20 / ES10K / K3 // ODEPRO: KL52 / B108 // OLIGHT: M2R Warrior // ON THE ROAD: M1 / i3 / M3 Pro // ROVYVON: A2 + A5R / E300S / A8 // SKILHUNT: M150 / M200 // SOFIRN: SF14 + SP10A / SP32A / SP10B // WUBEN: TO10R / E05 / T70 / E10 / TO50R / E19 // XTAR: PB2 Charger // Tricks: 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 // TIR: 1 / 2 // Others: Biscotti 3 + 1*7135 / Triple TIR w/ XP-G2 /// My Collection /// My Review's Blog (PT) /// OL Contest 2019 /// GIVEAWAY: 1 / 2

MRsDNF
MRsDNF's picture
Offline
Last seen: 4 hours 54 min ago
Joined: 12/22/2011 - 21:18
Posts: 13307
Location: A light beam away from the missus in the land of Aus.

I see a pipe. Thumbs Up

 

djozz quotes, "it came with chinese lettering that is chinese to me".

                      "My man mousehole needs one too"

old4570 said "I'm not an expert , so don't suffer from any such technical restrictions".

Old-Lumens. Highly admired and cherished member of Budget Light Forum. 11.5.2011 - 20.12.16. RIP.

 

MtnDon
MtnDon's picture
Offline
Last seen: 42 min 2 sec ago
Joined: 08/27/2015 - 18:25
Posts: 3038
Location: Canuk in NM

This info may not be of use right now, but seeing what you were doing with the dremel and sanding sleeve reminded me of these. Kutzall makes some super burrs for removing wood, carving with wood. There are different shapes and degrees of coarseness. When they fill up with wood dust use a torch and burn them clean and work again. 1/8 and 1/4” shafts available. They do have sales every so often. Also good are their discs for angle grinders and their hand rasps.

MascaratumB
MascaratumB's picture
Offline
Last seen: 10 hours 47 min ago
Joined: 10/29/2016 - 12:12
Posts: 4934
Location: Portugal
MRsDNF wrote:
I see a pipe. Thumbs Up

Ahah, maybe a pipelight Silly
That would be a nice idea, yes Grad And with an hot rod like,it would be….smokin Evil

MtnDon wrote:
This info may not be of use right now, but seeing what you were doing with the dremel and sanding sleeve reminded me of these. Kutzall makes some super burrs for removing wood, carving with wood. There are different shapes and degrees of coarseness. When they fill up with wood dust use a torch and burn them clean and work again. 1/8 and 1/4” shafts available. They do have sales every so often. Also good are their discs for angle grinders and their hand rasps.

Thats MtnDon! Those seem quite nice tools! Unfortunately I don’t even have “dremel” (as in the good ones!).
This is my tool that you see: https://www.youtube.com/watch?v=YZhzatfIFKs
It’s a cheap one, and I try the best I can with the bits it has (and some others I was offered last year).
Those bits (burrs?) the Kutzal has would be handy in this case! Thanks for pointing them Wink

[REVIEWS] ACEBEAM: H20 / TK16 // AMUTORCH: S3 / S3 vs 219c / AM30 / AX1 / VG10 // BLITZWOLF: BW-ET1 // BRINYTE: T28 // DQG: AA Slim Ti // FIREFLIES: ROT66 GEN II // HC-LIGHTS: SS AAA // KLARUS: XT1C // LIVARNOLUX: 314791 // LUMINTOP: Tool AA V2.0 + Tool 25 // NITEFOX: UT20 / ES10K / K3 // ODEPRO: KL52 / B108 // OLIGHT: M2R Warrior // ON THE ROAD: M1 / i3 / M3 Pro // ROVYVON: A2 + A5R / E300S / A8 // SKILHUNT: M150 / M200 // SOFIRN: SF14 + SP10A / SP32A / SP10B // WUBEN: TO10R / E05 / T70 / E10 / TO50R / E19 // XTAR: PB2 Charger // Tricks: 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 // TIR: 1 / 2 // Others: Biscotti 3 + 1*7135 / Triple TIR w/ XP-G2 /// My Collection /// My Review's Blog (PT) /// OL Contest 2019 /// GIVEAWAY: 1 / 2

MascaratumB
MascaratumB's picture
Offline
Last seen: 10 hours 47 min ago
Joined: 10/29/2016 - 12:12
Posts: 4934
Location: Portugal

I had some time tonight and made a little bit of the flashlight mod! The first and most insignificat part Big Smile

I replaced the rubber cap!
The original was a black one, and I put an orange one. I had to cut some pieces of the orange rubber cap to make it fit above the switch and white spacer.

Below you find the photos of how the light is composed in the tailcap.



Also, a justification of my options: Due to the “architecture” of the tailcap, shaped for a tall and fat forward clicky switch, and due to the diameter of the PCB, I will not use a Reverse Clicky Switch (lighted or not) in this flashlight . You can compare how different they are below. Also, I will not bypass the spring. The 4 Samsung or Luxeon will already drain a lot of juice from the cell, so I will avoid more power drain!

For those wondering about the wood piece, here’s a glimpse of what I want Wink
BTW, the clip used in the flashlight is not the one I will use for the final mod.

And here is part of the reason why I will want the wood support !
The rubber tailcap doesn’t allow the flashlight to tailstand correctly, so, putting it into a “hole” will help to maintain it in “candle” position when needed!
Also, I will use a white cap from a liquid yoghurt to make a diffuser when I want to put the flashlight into the wood structure uspside down Wink It will act like a “lantern” instead of a candle.

[REVIEWS] ACEBEAM: H20 / TK16 // AMUTORCH: S3 / S3 vs 219c / AM30 / AX1 / VG10 // BLITZWOLF: BW-ET1 // BRINYTE: T28 // DQG: AA Slim Ti // FIREFLIES: ROT66 GEN II // HC-LIGHTS: SS AAA // KLARUS: XT1C // LIVARNOLUX: 314791 // LUMINTOP: Tool AA V2.0 + Tool 25 // NITEFOX: UT20 / ES10K / K3 // ODEPRO: KL52 / B108 // OLIGHT: M2R Warrior // ON THE ROAD: M1 / i3 / M3 Pro // ROVYVON: A2 + A5R / E300S / A8 // SKILHUNT: M150 / M200 // SOFIRN: SF14 + SP10A / SP32A / SP10B // WUBEN: TO10R / E05 / T70 / E10 / TO50R / E19 // XTAR: PB2 Charger // Tricks: 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 // TIR: 1 / 2 // Others: Biscotti 3 + 1*7135 / Triple TIR w/ XP-G2 /// My Collection /// My Review's Blog (PT) /// OL Contest 2019 /// GIVEAWAY: 1 / 2

NeutralFan
NeutralFan's picture
Offline
Last seen: 10 hours 20 min ago
Joined: 03/20/2014 - 19:22
Posts: 996
Location: Wisconsin, USA

Keep up the good work MascaratumB! I like your creativity and all the pictures you post. Thumbs Up

I’d rather use my flashlight around the house than turn on the lights.

pinkpanda3310
pinkpanda3310's picture
Offline
Last seen: 12 hours 37 min ago
Joined: 12/28/2013 - 08:45
Posts: 2571
Location: Perth

Cool. A wooden holder for candlelight mode. That’s inventive. Thumbs Up

MRsDNF
MRsDNF's picture
Offline
Last seen: 4 hours 54 min ago
Joined: 12/22/2011 - 21:18
Posts: 13307
Location: A light beam away from the missus in the land of Aus.
Thumbs Up Peace pipe?

 

djozz quotes, "it came with chinese lettering that is chinese to me".

                      "My man mousehole needs one too"

old4570 said "I'm not an expert , so don't suffer from any such technical restrictions".

Old-Lumens. Highly admired and cherished member of Budget Light Forum. 11.5.2011 - 20.12.16. RIP.

 

MascaratumB
MascaratumB's picture
Offline
Last seen: 10 hours 47 min ago
Joined: 10/29/2016 - 12:12
Posts: 4934
Location: Portugal

NeutralFan wrote:
Keep up the good work MascaratumB! I like your creativity and all the pictures you post. Thumbs Up

Thanks for your words NeutralFan! It is not very creative, specially if we look to other mods and builds, but…it may be something useful for this light Wink
pinkpanda3310 wrote:
Cool. A wooden holder for candlelight mode. That’s inventive. Thumbs Up

It was inspired in something I am using for my “bedside” flashlight, an Sofirn SP32. I am using a piece of foam from an old perfume box. It works, but foam loses its shape and the flashlight starts to inclinate. So I thought about a more “rigid” structure. From then on…that’s what you’re seeing Wink

MRsDNF wrote:
Thumbs Up Peace pipe?

Ahaha, I guess some “peace makers” would need a pipe and a light to guide them through the way! Big Smile I just hope this ends up well to make it work Wink No smoke!

_________

BTW folks, I need some help here, please!
I want to put a tritium vial in the tailcap, in the lanyard hole. On the one side I will put the Pocket Clip, and on the other, a trit.
This is the shape of the lanyard hole.

My questions are:
1) what shall I use to glue it there? (ex: epoxy? UV glue?)
2) what techniques to you recommend so that I don’t damage the rest of the host while the glue dries?

I never used/placed tritium, nor epoxy, nor uv glue, so I don’t know the best procedure for this!

Any help is appreciated and thank you in advance Wink

[REVIEWS] ACEBEAM: H20 / TK16 // AMUTORCH: S3 / S3 vs 219c / AM30 / AX1 / VG10 // BLITZWOLF: BW-ET1 // BRINYTE: T28 // DQG: AA Slim Ti // FIREFLIES: ROT66 GEN II // HC-LIGHTS: SS AAA // KLARUS: XT1C // LIVARNOLUX: 314791 // LUMINTOP: Tool AA V2.0 + Tool 25 // NITEFOX: UT20 / ES10K / K3 // ODEPRO: KL52 / B108 // OLIGHT: M2R Warrior // ON THE ROAD: M1 / i3 / M3 Pro // ROVYVON: A2 + A5R / E300S / A8 // SKILHUNT: M150 / M200 // SOFIRN: SF14 + SP10A / SP32A / SP10B // WUBEN: TO10R / E05 / T70 / E10 / TO50R / E19 // XTAR: PB2 Charger // Tricks: 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 // TIR: 1 / 2 // Others: Biscotti 3 + 1*7135 / Triple TIR w/ XP-G2 /// My Collection /// My Review's Blog (PT) /// OL Contest 2019 /// GIVEAWAY: 1 / 2

CRX
CRX's picture
Offline
Last seen: 20 min 45 sec ago
Joined: 04/02/2013 - 15:27
Posts: 4175
Location: Scotland

I use a piece of clear tape stuck to the inside of the loop backed with some blutak pressed against it to create a well with a very slightly convex floor then carefully place the vial into the lanyard hole onto the tape and adjust position with a toothpick.
It’s tricky.

Then once I’ve got the vial in place, level, making sure no vial parts (especially tube ends) are protruding past the light body etc I apply some UV glue with a toothpick by slowly dripping in small drops until there is a layer filling the bottom of the well & surrounding the vial.
To help eliminate bubbles you can apply tiny amounts of glue into the vial ends first before placing as there are small pockets on each end which often like to expel tiny air bubbles at just the wrong moment.

Set with UV light making sure no bubbles are hiding, then slowly apply more glue to fill the well some more and harden again.
Fill to a level that covers the vial and is as flush as possible with the body of the light, again tricky due to the curvature.
Then you can remove the tape, give the inside a clean with cottonbud & ISP etc and apply another thin layer to the backside to help protect the vial some.
Hope that gives you some ideas Thumbs Up

- LEDs & Other Stuff -  - UI CheatSheets -  - CRX Mods & Builds -  - Stuff for Sale -CRX Hand Made FlashlightsThe only place that fear can exist is in our thoughts of the future.
It is a product of our imagination causing us to fear things that do not presently and may never exist. Fear is a choice.

MascaratumB
MascaratumB's picture
Offline
Last seen: 10 hours 47 min ago
Joined: 10/29/2016 - 12:12
Posts: 4934
Location: Portugal

CRX wrote:
I use a piece of clear tape stuck to the inside of the loop backed with some blutak pressed against it to create a well with a very slightly convex floor then carefully place the vial into the lanyard hole onto the tape and adjust position with a toothpick.
It’s tricky.

Then once I’ve got the vial in place, level, making sure no vial parts (especially tube ends) are protruding past the light body etc I apply some UV glue with a toothpick by slowly dripping in small drops until there is a layer filling the bottom of the well & surrounding the vial.
To help eliminate bubbles you can apply tiny amounts of glue into the vial ends first before placing as there are small pockets on each end which often like to expel tiny air bubbles at just the wrong moment.

Set with UV light making sure no bubbles are hiding, then slowly apply more glue to fill the well some more and harden again.
Fill to a level that covers the vial and is as flush as possible with the body of the light, again tricky due to the curvature.
Then you can remove the tape, give the inside a clean with cottonbud & ISP etc and apply another thin layer to the backside to help protect the vial some.
Hope that gives you some ideas Thumbs Up


Mate, you’re a life saver Wink
Thank you so much for the detailed explanation and also the link for the UV glue!
The process I had in mind was more or less similar to what you described, but those tips will help, as I never manipulated those materials! Specially to check the bubbles part!

I guess I will be able to do that according to these guidelines!
If it was a hole prepared for tritium, it would be easier but this can be tricky!

BTW, do I need to make any special preparation of that hole (besides cleaning it well before starting the process)?

Thanks again for your reply mate Wink

And… those lights Love

[REVIEWS] ACEBEAM: H20 / TK16 // AMUTORCH: S3 / S3 vs 219c / AM30 / AX1 / VG10 // BLITZWOLF: BW-ET1 // BRINYTE: T28 // DQG: AA Slim Ti // FIREFLIES: ROT66 GEN II // HC-LIGHTS: SS AAA // KLARUS: XT1C // LIVARNOLUX: 314791 // LUMINTOP: Tool AA V2.0 + Tool 25 // NITEFOX: UT20 / ES10K / K3 // ODEPRO: KL52 / B108 // OLIGHT: M2R Warrior // ON THE ROAD: M1 / i3 / M3 Pro // ROVYVON: A2 + A5R / E300S / A8 // SKILHUNT: M150 / M200 // SOFIRN: SF14 + SP10A / SP32A / SP10B // WUBEN: TO10R / E05 / T70 / E10 / TO50R / E19 // XTAR: PB2 Charger // Tricks: 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 // TIR: 1 / 2 // Others: Biscotti 3 + 1*7135 / Triple TIR w/ XP-G2 /// My Collection /// My Review's Blog (PT) /// OL Contest 2019 /// GIVEAWAY: 1 / 2

CRX
CRX's picture
Offline
Last seen: 20 min 45 sec ago
Joined: 04/02/2013 - 15:27
Posts: 4175
Location: Scotland

Just make sure it’s all clean, the tape has no leaks etc.
The hardest part is lining up the vial and air bubbles. I put the glue onto a flat plastic container lid and apply from there with a dropper implement, not straight from the bottle.
Still don’t think I’ve managed to do this perfectly but I’ve tried a few times Big Smile

Try a practice run or two by making little wells in blutak, another practice light or something similar and small cuttings of wire etc to mimic the tritium vial to get a feel for it.

You can dissolve the glue slowly with acetone or blast it with a jet lighter to soften and remove, but hopefully you wont need those Wink

- LEDs & Other Stuff -  - UI CheatSheets -  - CRX Mods & Builds -  - Stuff for Sale -CRX Hand Made FlashlightsThe only place that fear can exist is in our thoughts of the future.
It is a product of our imagination causing us to fear things that do not presently and may never exist. Fear is a choice.

NeutralFan
NeutralFan's picture
Offline
Last seen: 10 hours 20 min ago
Joined: 03/20/2014 - 19:22
Posts: 996
Location: Wisconsin, USA

Great info CRX! Looking forward to see how it works out for you MascaratumB.

I’d rather use my flashlight around the house than turn on the lights.

MascaratumB
MascaratumB's picture
Offline
Last seen: 10 hours 47 min ago
Joined: 10/29/2016 - 12:12
Posts: 4934
Location: Portugal

CRX wrote:
Just make sure it’s all clean, the tape has no leaks etc.
The hardest part is lining up the vial and air bubbles. I put the glue onto a flat plastic container lid and apply from there with a dropper implement, not straight from the bottle.
Still don’t think I’ve managed to do this perfectly but I’ve tried a few times Big Smile

Try a practice run or two by making little wells in blutak, another practice light or something similar and small cuttings of wire etc to mimic the tritium vial to get a feel for it.

You can dissolve the glue slowly with acetone or blast it with a jet lighter to soften and remove, but hopefully you wont need those Wink

Thanks again for the tips mate Wink Well, if I create a buble trit, would it count some more points as double mod? Silly Eheh!

I guess I will do as you say, try and practice in other flashlights to see how it is done and then I get back to the VG10! I don’t wanna ruin it before it’s done Silly

I am thinking about putting the tape in the outer part and drop the glue and trit from the inside of the tailcap (with the rubber cap removed of course!). Let’s see how it works Wink

And thanks again Wink

NeutralFan wrote:
Great info CRX! Looking forward to see how it works out for you MascaratumB.
Thumbs Up Beer

[REVIEWS] ACEBEAM: H20 / TK16 // AMUTORCH: S3 / S3 vs 219c / AM30 / AX1 / VG10 // BLITZWOLF: BW-ET1 // BRINYTE: T28 // DQG: AA Slim Ti // FIREFLIES: ROT66 GEN II // HC-LIGHTS: SS AAA // KLARUS: XT1C // LIVARNOLUX: 314791 // LUMINTOP: Tool AA V2.0 + Tool 25 // NITEFOX: UT20 / ES10K / K3 // ODEPRO: KL52 / B108 // OLIGHT: M2R Warrior // ON THE ROAD: M1 / i3 / M3 Pro // ROVYVON: A2 + A5R / E300S / A8 // SKILHUNT: M150 / M200 // SOFIRN: SF14 + SP10A / SP32A / SP10B // WUBEN: TO10R / E05 / T70 / E10 / TO50R / E19 // XTAR: PB2 Charger // Tricks: 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 // TIR: 1 / 2 // Others: Biscotti 3 + 1*7135 / Triple TIR w/ XP-G2 /// My Collection /// My Review's Blog (PT) /// OL Contest 2019 /// GIVEAWAY: 1 / 2

MascaratumB
MascaratumB's picture
Offline
Last seen: 10 hours 47 min ago
Joined: 10/29/2016 - 12:12
Posts: 4934
Location: Portugal

So, no work these few weeks, but I ordered some stuff I needed, namely: UV glue, tritium Vial, pocket clip.
Despite I initially put a “titanium” clip as aim, I opted for a Stainless Steel one!

I also got notice from kiriba-ru that my package with the pill, optics and Noctigon MCPCB were already shipped!
Despite this and despite I like the Samsung LH351D A LOT, is is probable that I will order Luxeon V Leds from Led4power… Yet to be decided

I also updated the tables on post #1 with the prices and the aims of this mod.

[REVIEWS] ACEBEAM: H20 / TK16 // AMUTORCH: S3 / S3 vs 219c / AM30 / AX1 / VG10 // BLITZWOLF: BW-ET1 // BRINYTE: T28 // DQG: AA Slim Ti // FIREFLIES: ROT66 GEN II // HC-LIGHTS: SS AAA // KLARUS: XT1C // LIVARNOLUX: 314791 // LUMINTOP: Tool AA V2.0 + Tool 25 // NITEFOX: UT20 / ES10K / K3 // ODEPRO: KL52 / B108 // OLIGHT: M2R Warrior // ON THE ROAD: M1 / i3 / M3 Pro // ROVYVON: A2 + A5R / E300S / A8 // SKILHUNT: M150 / M200 // SOFIRN: SF14 + SP10A / SP32A / SP10B // WUBEN: TO10R / E05 / T70 / E10 / TO50R / E19 // XTAR: PB2 Charger // Tricks: 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 // TIR: 1 / 2 // Others: Biscotti 3 + 1*7135 / Triple TIR w/ XP-G2 /// My Collection /// My Review's Blog (PT) /// OL Contest 2019 /// GIVEAWAY: 1 / 2

pinkpanda3310
pinkpanda3310's picture
Offline
Last seen: 12 hours 37 min ago
Joined: 12/28/2013 - 08:45
Posts: 2571
Location: Perth

Nothing wrong with stainless clips. There’s a reason the market is full of them Wink

MascaratumB
MascaratumB's picture
Offline
Last seen: 10 hours 47 min ago
Joined: 10/29/2016 - 12:12
Posts: 4934
Location: Portugal

pinkpanda3310 wrote:
Nothing wrong with stainless clips. There’s a reason the market is full of them Wink

Yup true Wink I opted for that for a matter of budget and because the Ti clip wouldn’t add an “extra” to the mod, aside the look and the final value.
So I went to AliExpress and searched for a SS one! I just hope it fits well Wink
Maybe I can give it a personalized touch when it arrives Wink

[REVIEWS] ACEBEAM: H20 / TK16 // AMUTORCH: S3 / S3 vs 219c / AM30 / AX1 / VG10 // BLITZWOLF: BW-ET1 // BRINYTE: T28 // DQG: AA Slim Ti // FIREFLIES: ROT66 GEN II // HC-LIGHTS: SS AAA // KLARUS: XT1C // LIVARNOLUX: 314791 // LUMINTOP: Tool AA V2.0 + Tool 25 // NITEFOX: UT20 / ES10K / K3 // ODEPRO: KL52 / B108 // OLIGHT: M2R Warrior // ON THE ROAD: M1 / i3 / M3 Pro // ROVYVON: A2 + A5R / E300S / A8 // SKILHUNT: M150 / M200 // SOFIRN: SF14 + SP10A / SP32A / SP10B // WUBEN: TO10R / E05 / T70 / E10 / TO50R / E19 // XTAR: PB2 Charger // Tricks: 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 // TIR: 1 / 2 // Others: Biscotti 3 + 1*7135 / Triple TIR w/ XP-G2 /// My Collection /// My Review's Blog (PT) /// OL Contest 2019 /// GIVEAWAY: 1 / 2

Pages