Any Emisar/Noctigon headlamp is just going to make you feel like you’re running a fever!
Love the Emisar headlight idea, if a headband could be designed to accommodate both 18650 and 18350 shorty tubes.
Happy to meet you here on this forum too. I am your Italian friend super fan of all Emisar torches; I have practically all of them and all you buy on your site. Then I write on the Italian forum CPFITALIA where I created a large group of other Emisar fans; there are many of my Italian friends who buy Emisar from you; but there is a problem, indeed a contradiction concerning the Emisar D18. As you know, my D18 purchased on November 11, 2019, does not have a muggle mode. ToyKeeper that I had the pleasure of knowing, left me with doubts; he says that the D18 versions without the muggle mode still should not be on the market because they are not perfected; in particular the 11-20 version that has the firmware without the muggle mode is an updated version which, as we both know, does not have the muggle mode, but unlike the others it can be reset, has automatic and manual memory and protection if you hold down long the power button. Well, ToyKeeper claims that d18s with muggle mode are on the market. This is our doubt: do all the versions on sale now with muggle mode have no factory reset, no manual memory or button protection? We would like certainties. For me, I don’t find the muggle mode in D18 very useful. But I would like to be sure that these Emisars without muggle fashions are safe and are those currently on sale. Thanks Hank, but I think this happens because of continuous updates and we customers never know a thing. Best regards Riccardo from Rome. Riccardo is my username on this forum. I’m Mario and I think you remember. 
Just received the D4v2 Ti with raised ring and SST20 3000K emitters. Such a beautiful light…Love it 
But already tempted again for the brass one.
Very cool, that in lighning and similar modes the switch LED is active synchron to the main LEDs.
are u saying the switch is flashing in sync with the LEDs in lightning mode??? And sunset mode? Any others?
thanks, amazing …. gotta get one!
Yes. In lightning mode it is very visible, because lightning has those dark moments. In candle mode it depends very much on the brightness. This does not work very good, because the switch Led has only a few brightness levels. In tactical strobe, the effect is quite cool, too. But it is limited by the fact that the switch Led is not very bright.
Just got my d4v2 TI today and it’s by far the best EDC i’ve ever had. I got myself the sst20 4000k version with clear and floody optic
Bellow follow some beamshots using the clear 10622 optic and the floody 10623 optic, the beamshots are both taken on the same powerlevel
Beamshot clear 10622 optic:
Beamshot floody 10623 optic:
Auxiliary lights with clear optic:
Auxiliary lights with floody optic:
More images of the D4V2 TI:
and compared to the old d4:
Anyone tested yet how long brass and Ti versions can handle turbo before stepping down compared to aluminium version?
Edit. Especially interested brass version performance.
Got mine yesterday.
WELL DONE! Beautiful light.
One thing I note: In rainbow mode it changes colors way slower that the earlier edition. No idea why that happens.
Not sure if you’re referring to the Ti version or the brass, but I have the Ti D4V2 and it does the same thing - slow color changes in rainbow mode. Must be a difference in the firmware version - I like the slower change, but I haven’t seen it in any other versions of the anduril firmware.
Brass and it cycles way slower.
Saw this posted on Reddit. FW3A deep carry clip fit onto a D4 shorty.
Had a slight mind-blown moment, and gave it a try on mine.
Can confirm it works perfectly! Used a piece of hammered copper wire to connect the tail PCB to the battery tube and all was well!
Hank, there needs to be a smaller 14500 version of the ti and copper! 
I just received my second ti. This one has warm switch aux LEDs, and warm 3000k LED. Beautiful. 
Could you please take some pictures of that combo with 3000K emitters on low? I am wondering how warm the switch aux LEDs are compared to 3000K emitters.
I’m having a hard time getting the LEDs and the button to both show their colours realistically at the same time. These pics show the colour of the switch pretty well, but the LEDs are slightly warmer in real life.
I posted this. Thanks for confirming that copper wire works perfectly. Now I just need to find some laying around…
Hello everyone! just on the last day of 2019 I received Emisar D4V2 Brass! I state that I have Emisar D4V2 and the first Emisar D4. The first difference I noticed is the weight: Emisar Brass, 226 grams, Emisar D4V2, 117 grams, both with the same battery, Samsung 30 Q 18650. I noticed other differences: 1) faster flashing in Emisar D4 brass, 2) flashing in rainbow mode of the aux leds, slower in Emisar D4 Brass … will this thing of the alternation of colors be normal? Then I noticed a nice thing: in Emisar brass, if you make 15 or more clicks, the version you purchased will flash! For the rest, the fantastic Anduril UI works perfectly. Then as you all know, it has the illuminated power button; in off mode, the button will illuminate aux mode (the color you have set by clicking 7 with the flashlight off). When the torch is on, the power button follows the various light intensities that you will gradually set. I would like ToyKeeper or some of you to shed some light on the rainbow mode: is it normal that in EmisarD4 Brass the alternation of colors is slower than in EmisarD4 V2? Hello and happy 2020 to all!