REVIEW MANKER E03H XPL

I have the E03H, and the E02. Is there an E02H? Or is that the same as the E02? I love both of these, they just exude quality! Enjoyed the review, thanks.

Yes I recently got both myself but you can also just buy the H on its own too.

Great little light,they have quickly become some of my most carried for sure!

Clearance Sale Now!! E02,E02H and E03H 50% OFF

Will there be any more E03H with the Nichia?

Since it’s clearance, I suspect not.

I just ordered a Cree E03H, since no Nichias are available at the clearance price, though they are available at full price from some vendors.

I have an E02 with Nichia, and prefer high CRI, but I’ll give the E03H Cree a try at this price.

Just curious. Has anybody had success in taking out the driver/led assembly out in one of these? I know I saw somewhere here in BLF somebody swapped 219b on his (or her?) E02 and it looks like its only the retaining ring holding it in place. I can’t get my retaining ring to budge though and its all mangled now. My needle nose pliers has nowhere left to grip.

Says here to use tape for friction. (WTS) Nichia 219B R9080 sw45k & 219C 5000k R9050 - #6 by AnhTran. I would guess that anything rubber would work as well?

I think that’s for the bezel that holds the lens which is tight but I managed to remove that. The tube is also tough to unscrew but I also managed that. It’s the retaining ring that holds the driver that I can’t seem to move. Thanks for the find though. I knew I saw it somewhere.

I ordered a discounted E03H with a 219C, they claim WW, and they are still available at 1/2 price. Got mine in today - it's pretty nice, but the filters are a bit of a pain - mine are tough to slide. All in all, a good deal though, nice quality. The headband is so-so. Feels tight but also feels like it's gonna drop to my nose.

The 219C wasn’t available for the E03H when I ordered a few days ago. I’d much rather have the 219C.

Whoa da - didn't notice this before, but on a good Vapcell 1000 mAh 14500, on turbo the tint turns blue quick! I quickly turned it off - LED still seems good. It really doesn't seem that bright to be maxing out a 219C. It must be on a bad alum MCPCB or something...

Tom E Where did you see 219C still available for the E03H? It’s been out of stock for a while now.

LiIon doesn’t seem like a good idea, even if some have tried it:

I see the 219C right there on the page link you pasted.

Uhh, that voltage range just might be the problem... :FACEPALM:

Did you select Nichia?

I see:

Yeah, think it's past my bedtime.... Oh well.

well, last night I fried my E02 after Steven at Manker said the light would work on a 10440! Website clearly states 1.8V is the max.

I think Steven said latest batch E02 support 10440.?But your E02 was bought 2 years ago.

There was a thread in our Forum, BLF, from May of 2017 where you Manker said we could run the E02 on a 10440! Here is the link to the thread, yours is post number 29

if you tell us we can run our E02 on a 10440, and we try it and our light dies, are u not responsible? That is not good Customer Service, would u agree?

I ordered a discounted E02 and E03 with 219C. Both have ugly brown circles in the hotspot. Not so bad in the E02 but very obvious in the E03.