FEELER: FW1A Titanium? FW3A copper/brass? FW21 PRO 3xXHP50.2?

My FW3C is turning into a shelf queen with a beautiful patina, acquired black clip, squirrely switch cap, and orange glow gasket. It’s a package!
I might try the brass, butt was truly pissed when the E07 advertised their brass as uncoated which it definitely is coated and is stagnate bling! :person_facepalming:

Oh man FW21 Pro for me please

2x pro

FW1T, FW3A Brass and FW21 PRO for this guy

ok

What would be differences between brass FW3B and copper FW3C for the following: thermal management, dent resistance, weight?

Fw21 pro

FW21 pro, make it happen

Did you say FW21 PRO in copper? ;0)

Same
For the FW21pro would prefer neutral color temperature anywhere from 4000K to 5700K.
But I would prefer in a classic body Lumintop.

FW21 Pro . i need to start forest fires.

im joking.

maybe a garden fire.

I’ve changed my mind about FW1Titanium...

But i would be interested if FW1TiCu available or just the copper driver/MCPCB shelf as stand alone part.

what kind of optics will the fw21pro be using?

FW21 pro with a color temp below 5000k and tint below the bbl

Show me FW21 pro run time graph next to the Nightwatch NS53a also 10k lumens and 3x xhp50.

I do not trust Lumintop. Too many problems and not good enough customer support.

Any more info on FW21 Pro optics? Diameter? Reflector or lens?

when info is available i post it

Brass should be a tiny bit lighter, a little tougher, and much worse thermally than copper :slight_smile:

FW21Pro!

How I would like to have an FW1A Titanium…