UPDATE: sw35 and sw45k are now back in stock. sw30 is still low.
j_mcsquare swapped some of my emitters into his LT1 and results compared to stock are pretty nice. Thanks Jack!
Link to images are here on imgur
I would like,
8 sw30
8 sw35
3 sw45k
please and thank you.
PM
TTT
If you’re on lockdown and want to learn to reflow your own emitters, now is the time 
3 x sw30
7 x sw45k please
Nice pic! PM sent.
I’m locked down in a different place than the hot air station 
Bummer… so no flashlight mods till this whole covid-19 fiasco is over?
I can do some stuff with a soldering iron, but anything that needs hot air or a microscope will have to wait. It’s OK, family and work keep me super busy still even stuck at home. I’m grateful I can still work!
Hi azhu, I would like 1 sw30 and 3 sw35s please. Thanks!
PM inbound.
Very impressed azhu! Got my LEDs today and reflowed the sw30 right away.
Nice! Glad it arrived safely.
Thanks Andy
Warm High CRI 
Jon, which one is rosier?
the 9080 looks slightly richer red…
the photo I posted above of the 9050 (trailhunter source), next to the 9080 (azhu source) is a good comparison, especially because I set both lights to the same 85 lumen level.
as a 219b LED gets brighter, it gets pinker, watch:
all thumbs up to the 9080 from azhu
the 9050 is great too, if that is what you have.
The amount of pink tint increases with brighter levels. (above 100 lumens)
You can definitely see the rosiness in the spill. Thanks for the photos!
thanks for the fantastic LEDs!
fwiw, the 219b 3000k 9080 is a D180 bin.
That is very close to the actual output, in the Sunwayman V10a, on LiIon.
About 180 lumens on LiIon, and about 90 lumens on AALoop.
Im very happy with the Color, Tint, and output. Recommended!
Two of my Favorite LEDs, major thanks to azhu for sourcing:
