WTS: Clear E07, anduril SP33, Bistro NS22 !price drop!

[buck91]

Did this ever get resolved? I am in the same spot with my FW3A trade with him.

[sb56637]

WTS seller warning list

Hi everyone, The vast majority of personal transactions between individual BLF users are legitimate and turn out well for both parties. But every once in a while I receive private reports of transactions that have "gone south". As a forum, BLF is not responsible for these unfortunate situations, as stated in our policy: On the other hand, BLF does not condone illegal activity or other shady business practices: So, while I do not personally moderate or oversee personal business transa…

[cabfrank]

Wow, so they are the same person?

[sb56637]

@cabfrank

Wow, so they are the same person?

To a reasonable degree of certainty, yes.

[cabfrank]

Is that allowed, sb?

[raccoon]

I have two accounts, but I don't use them for evil.

[sb56637]

@cabfrank

Is that allowed, sb?

It’s not encouraged, but it’s not explicitly prohibited either, as there are always special cases. But using even one account for nefarious purposes is prohibited. For now I’ll leave both of his accounts active to facilitate communication with anybody who got stiffed.

[cabfrank]

I sure hope it gets resolved. Our forum is a good place, with good people.

[nbjly]

I sent him 5 Nitecore D10’s to modify, lights to trade and he straight up ripped me off - won’t reply. I have his address but I won’t post it here. Thinking about calling his law enforcement to see if they can help.

[MascaratumB]

@nbjly

I sent him 5 Nitecore D10’s to modify, lights to trade and he straight up ripped me off - won’t reply. I have his address but I won’t post it here. Thinking about calling his law enforcement to see if they can help.

Sorry to ask, but just by curiosity, could you please tell what the mods were supposed to be?
Just to cross some information !

I hope your situations get solved folks :+1:

[nbjly]

LED / Driver swaps

@MascaratumB

@nbjly

I sent him 5 Nitecore D10’s to modify, lights to trade and he straight up ripped me off - won’t reply. I have his address but I won’t post it here. Thinking about calling his law enforcement to see if they can help.

Sorry to ask, but just by curiosity, could you please tell what the mods were supposed to be?
Just to cross some information !

I hope your situations get solved folks :+1:

[MascaratumB]

@nbjly

LED / Driver swaps

@MascaratumB

@nbjly

I sent him 5 Nitecore D10’s to modify, lights to trade and he straight up ripped me off - won’t reply. I have his address but I won’t post it here. Thinking about calling his law enforcement to see if they can help.

Sorry to ask, but just by curiosity, could you please tell what the mods were supposed to be?
Just to cross some information !

I hope your situations get solved folks :+1:

Thanks and sorry for the question!
The driver would have Anduril firmware?

[djozz]

Cereal_Killer made some own drivers at the time, they used different MCU’s than the ones running Anduril. But I’m not sure how that is in this case.

[MascaratumB]

@djozz

Cereal_Killer made some own drivers at the time, they used different MCU’s than the ones running Anduril. But I’m not sure how that is in this case.

That’s why I’m asking, to cross some information

[hodor]

It was a 1+3+fet. Not sure on the MCU though.

[nbjly]

Info I received:

” I can do any 1xAA d or any ex series for $25 without aux LED or $35 with aux LED. I can not do D20’s.
This includes anduril driver and modern led swap (new led on copper mcpcb).”

@MascaratumB

@nbjly

LED / Driver swaps

@MascaratumB

@nbjly

I sent him 5 Nitecore D10’s to modify, lights to trade and he straight up ripped me off - won’t reply. I have his address but I won’t post it here. Thinking about calling his law enforcement to see if they can help.

Sorry to ask, but just by curiosity, could you please tell what the mods were supposed to be?
Just to cross some information !

I hope your situations get solved folks :+1:

Thanks and sorry for the question!
The driver would have Anduril firmware?

[MascaratumB]

@nbjly

Info I received:

” I can do any 1xAA d or any ex series for $25 without aux LED or $35 with aux LED. I can not do D20’s.
This includes anduril driver and modern led swap (new led on copper mcpcb).”

@MascaratumB

@nbjly

LED / Driver swaps

@MascaratumB

@nbjly

I sent him 5 Nitecore D10’s to modify, lights to trade and he straight up ripped me off - won’t reply. I have his address but I won’t post it here. Thinking about calling his law enforcement to see if they can help.

Sorry to ask, but just by curiosity, could you please tell what the mods were supposed to be?
Just to cross some information !

I hope your situations get solved folks :+1:

Thanks and sorry for the question!
The driver would have Anduril firmware?

Thanks again for your reply!!

Just to be clear, my questions where due to what is exposed here: WTS seller warning list .

Again, I hope all your situations get a good end

[mbp]

I never received a response of any kind from TrueRMS / Cereal_killer, so I am sharing his personal information here to the extent reasonable. His name is Dan Gostlin and he lives in South Solon OH. He is a thief and a scammer and I will be sharing his information anywhere I can. Do not do any kind of business with him.

[CNCman]

@sb56637

@cabfrank

Is that allowed, sb?

It’s not encouraged, but it’s not explicitly prohibited either, as there are always special cases. But using even one account for nefarious purposes is prohibited. For now I’ll leave both of his accounts active to facilitate communication with anybody who got stiffed.

.
LMAO, LOL, stiffy, :laughing:
.
No disrespect to any injured party.

[cabfrank]

I guess I missed the joke.