azhu
August 19, 2020, 3:40pm
440
ReManG:
Pics
Bought some 3500K 219Bs and his last XPE2 660nm for an AA light I wanted to mod…
Swapped out the Ti3 emitter for the 3500K 219B, just about the perfect tint for me. Jet E10R had an XPLHi in CW, wanted a red emitter light and a little heat with a strap wrench gained me access to do the swap.
Fast shipping, super well done packaging and thanks again for these ’em otters again AZHU!
Glad you like the emitters! That red on the Jet E10R looks awesome.
Unheard
August 27, 2020, 3:55pm
441
Got some sw30 and sw35 LEDs from Azhu. Shipping was superfast
The sw35 reminds me on Nichias E21A with a slight red corona around the hotspot. Shown is a Mi1C with sw35 (left) and the C2 with a 3000K E21A:
I have no target for the sw30 currently, maybe it’s time for some new Sofirn C01S
azhu
August 27, 2020, 4:00pm
442
Unheard:
Got some sw30 and sw35 LEDs from Azhu. Shipping was superfast :+1:
The sw35 reminds me on Nichias E21A with a slight red corona around the hotspot. Shown is a Mi1C with sw35 (left) and the C2 with a 3000K E21A:
I have no target for the sw30 currently, maybe it’s time for some new Sofirn C01S :person_facepalming:
Thanks for sharing. The slight red/rosy from the sw35 does look really good in this photo.
Unheard
August 27, 2020, 4:14pm
443
Difficult to find similar modes. But yes, the C2 has more juice than the Klarus, even with its original 219C.
The beams of both lights are lovely.
rhemz
September 9, 2020, 5:34pm
445
Interested in 4x sw45k and 2x sw35
azhu
September 21, 2020, 5:59am
447
UPDATE: sw30 is low in stock. If you need some, pm me soon before it’s out.
azhu
October 15, 2020, 3:54pm
448
UPDATE: sw30 is now SOLD OUT
nocturne
October 15, 2020, 4:50pm
449
Won’t Nichia make more?!? :’(
Thanks for hooking us up, azhu!
I would like to order 8 sw45k. I will pm for shipping and payment details.
benjamins
October 20, 2020, 10:36am
451
It took 16 days for the ordered LEDs to arrive in Europe, very satisfied!
Wish me luck, I’ll need it reflowing them
azhu
October 23, 2020, 6:04pm
452
benjamins:
It took 16 days for the ordered LEDs to arrive in Europe, very satisfied!
Wish me luck, I’ll need it reflowing them
Good luck! Once you get the hang of things, it’s not too bad.
Dsvist12
October 26, 2020, 10:31pm
453
Hello! Can these be put onto a LUME1 board for an FW3A?
I’ve never done reflowing so I’ll need to find someone on Reddit or here and pay them along with sending the parts over too.
I currently have an FW3A with 219b Sw45 from a Reddit user and want another in stainless steel.
Kcz
October 27, 2020, 12:50am
454
I’ll take six sw45k with First Class shipping.
Vbryanv
October 27, 2020, 3:36am
455
I would like 7 of the 45k, 2 of the 30 and 2 of the 35 if you have them
azhu
October 27, 2020, 5:42am
456
Dsvist12:
Hello! Can these be put onto a LUME1 board for an FW3A?
I’ve never done reflowing so I’ll need to find someone on Reddit or here and pay them along with sending the parts over too.
I currently have an FW3A with 219b Sw45 from a Reddit user and want another in stainless steel.
The LUME1 board is just the driver and aux board. These emitters will need to be reflowed onto a separate MCPCB.
Dsvist12
October 27, 2020, 1:06pm
458
Oh, apologizes! Thank you for that correction.
