I have a spare Lux-RC 371D light engine and I want to use it in my FW3Ti.
My current obstacle is to find/create a contact board with the battery because I have to remove its stock driver.
By “white,” do you mean bare aluminum with oxidation or an anodizing that actually dyes the metal white? By a quick Google search, it seems dyeing anodized aluminum white is not possible, rather the anodized metal is allowed to oxidize, giving a whitish silver finish to the bare metal.
I stripped the anodizing of this originally mint green Olight and then lightly buffed the surface. As you can see, the finish is the bare aluminum in a matte silver color. Prior to buffing, the aluminum did have patches of white. Perhaps sealing in the white oxidation would give it a true matte white look.
Hrmm…I was thinking more along the line of the chalk white of the Tool AA. Similar to what kawiboy posted. That and red aux led Mmm…delicious.
Apparently red GITD isn’t very bright.
Does anyone happen to have one of the #36 o-rings laying around they don’t need? I did the o-ring mod on all but one of my FWs, I ran out of them! It’s not that they’re expensive, my OCD will give me a lot of trouble if I buy a pack of 10 and leave 9 lying around. Would be nice to just get the one I need, I can PayPal you the cost of a stamp and envelope! If not, no worries….
Okay, another question… does anyone happen to have an FW3A 18650 (yes 18650) body laying around? I have a mod-fodder FW3A that I got with 18350 and 18500 tubes, but no 18650 tube, and I’d gladly purchase yours. Send me a PM if so!
Has anyone seen or forged a magnetic tail cap? I mean not something bolted on to the end using 3D printing, but as a standalone integrated metal solution. I’d be really interested in seeing it or purchasing one if someone has. Thanks