Hi stephenk
Sure, you can leave us a comment when you place the order.
KDLITKER P6-SST20 Luminus SST-20 700 Lumens 3V - 9V P60 Drop-in
I will help to arrange it for you.
Thank you
Ban
Thank you!
I made an order on 14/05/2020. Still not shipped(
.
This one might fit after filing it to length on the led end, 57.8mm(D) x 55mm(H) SMO Aluminum Reflector
http://kaidomain.com/ Product Code : S021807
.
.
Or maybe this one.
.
.ALSO
12.78ā¬ 5% OFF|60mm(D) x 50mm(H) SMO / OP Aluminium Reflektor fĆ¼r Cree XM L / XHP LED|Tragbare Beleuchtung Zubehƶr| - AliExpress*
.
Thanks for the suggestions CNCman. The K6 reflector is designed to fit inside the host with its particular geometry, so fitting any other thing inside requires careful selection.
Given the situation, I am @#$%. Can't help feeling like @#$% the whole thing altogether now. I wish I could re - coat the reflector easily. Jeez with this now.
New Arrivals :
Cree XHP35 HI A4 27G Warm White 2700K CRI90 LED Emitter
Cree XHP35 HI A4 30G Warm White 3000K CRI90 LED Emitter
Perfect for an emitter swap for my MF02 and BLF GT.
Hello Ban,
These new XHP35 HI batches are really nice additions. I have seen 40G 90CRI and 2B 80CRI already, but if you could get a 90CRI batch of them with one of these tint codes, that would be even better:
one of 4A, 4B, 3C, 3D, or one of 45G or 50G. These would be around 4500-5000K, and would make a super nice neutral white thrower.
Could you please consider it?
+1^^^^
Special code āmidā does not work.
I made an order yesterday with the previous coupon code : sum (ā10% off), try this one instead of mid.
BanL, I highly recommend you buy one of the following to test your LEDs so you know what you actually bought and if your suppliers are being honest with their labeled bins. Also if you can label your LEDs with the CCT, CRI, and tint (DUV), it would greatly help your customers buy with confidence and this will set your store apart from other LED stores online. Keep in mind many customers might not want to take gambles when buying emitters.
HPCS300 Mini $499 (No screen)
https://www.aliexpress.com/item/10000168095794.html?spm=a2g0o.store_home.productList_597510024.subject_3
OHSP350 $649
https://www.aliexpress.com/item/10000021726931.html?spm=2114.12010612.8148356.8.f9847abd10qFCE
OHS350C ($779 same as above but with software to produce reports on computer)
https://www.aliexpress.com/item/10000110079556.html?spm=a2g0o.store_home.productList_597510024.subject_1
Iām sure if you contact the company directly on their website, you can get some discounts.
+1000
I donāt buy emitters these days until they are proven by somebody here with at least a beamshot comparison. And I only but more than a sample emitter until Iāve tested it or someone posts spectral data. I canāt deal with much more than 0.0010 duv. Lee filters have saved many LEDs from the trash bin, but theyāre not ideal. They scratch easily and cut a lot of lumens. This really should be a standard practice for any seller who claims a specific tint/CRI binning.
I too was intrigued and purchased one a few days ago. My intention to put in a White Flat 2mm^2 and Convoy SST40 driver (Link). Added a note regarding SMO reflector, hope they oblige.
āsumā works fine.
Thanks!!
Is KD operating normally at the moment? I have three orders on āprocessedā, the oldest one for more than a month. Nothing shipped apparently and I donāt get replies to my emails either.
Just right now, I bet not because from October 1st to 7th (or 8th), itās the golden week = Chinaās national holiday.
I placed two orders around Sept 10 and 17 and received them around Sept 25 and on Oct 2.
Even the website has holiday feelings. Itās down today.
And down again today. 
I made an order (bare emitters (in stock)) on 1st Oct and shipped on 9th, so even with website down, things seem to resume pretty normally after the golden week/national holiday.