Hello BLFers!
I have another item to give away.
This is a P60 drop in that I made with an XP-E Q3 warm white emitter. I think the tint bin is 7A but I can't be sure. It is a little cooler and skews a little more flat yellow than the golden glow typical of a well driven Xenon.
The driver is a Nanjg AK-47A configured to 3 modes (L-M-H). The max is 1.05A. PWM on lower modes is not visible. I'm used to there being an audible whine on the medium mode of some Nanjg drivers but this one is barely audible. YMMV.
The star is affixed to the pill with a sliver thin layer of Arctic Alumina epoxy. A hard plastic isolator sits under the reflector. The emitter looks a little bit off center but the beam is close to perfect. This being an XP-E drop-in the hotspot is tight.
I'll also include some soda can strips for shimming. The drop-in has been tested but otherwise is new.
To enter, post a number between 2001 and 3000. The closest entry will win.
It doesn't matter when you joined or how many posts you have or even if you won one of my previous giveaways. I only ask that you enter once.
Anyone can enter but I will only ship to a US address. If you are abroad but have a friend in the US willing to accept and ship the item to you then be my guest.
(Please don't ask whether I will ship abroad if you pay for shipping. For me it's not just the cost. There are more hassles to international shipping than just added cost. If you send me a PM asking me about this it will be ignored.)
The giveaway will probably close Wednesday (9/26) 6pm Pacific time but please don't hold me to that. I will not end it earlier but reserve the option to extend the deadline.
Thanks for looking and good luck!