My reported 415mA still falls comfortably in the measuring range of my analog multimeter but near the highest 500mA limit. I am lucky to have this Medium value measured or otherwise would damage the meter. While I could recall a BLF member shared a High 500mA for a Klarus NT20 among others with his new DMM, Kreislerās doubt might reflects a depleted Ni-MH AAA (less than USD 40cents) adopted by me. Although an affordable DMM with 20A DC is common nowadays, I want one could measure up to 50A for 3 or 4x18650 scenario and, imagine it is technically feasible, clamp type for a direct trouble free measurement. I need so time to check it out. I spot small affordable clamp type DDMs but not even up to 250mA max.
I have one coming for review.
Letās see if itās worth! 
The UF-T1 is now on cnqualitygoods for 19,50. They claim it is made of stainless steel:
First it was listed by manufacturer as Titanium, then DX said itās Aluminium, now CNQG states Stainless Steelā¦
Iāve one coming from china, but will still take 3 or even 4 weeks to arrive, if everything goes well.
Fatlokwok, you never said where you got yours from. This light still interests me if only for itās diminutive size but especially if itās really titanium.
I wasnāt sure if he was saying he bought it there or that it can be had for $22 street price locally.
Youāre right JohnnyMac, after re-reading the post Iām not sure neitherā¦ 
That is, I gave the sales lady HK$200 cash and she was pleased to give me back HK$30 despite the normal price HK$188.
ApLiu street at Shamshuipo of Kowloon, Hong Kong.
For your informatio:
Received my UF-T1 yesterday. My first impressions: A fine torch. Nice smooth threads. Imho it is not titan, but Iām not a professional.
From left to right: DQG III Ti, III SS, UF-T1
What's it like compared to DQA III Ti, III SS?
What the light output like?
Can it take 10440 batteries?
It looks slightly bigger than the other two.
Does DQA III Ti has a clicky?
Itās a magnet
I have a UF-T1 on the way from DX to be reviewed. Looking forward to this one. Might just end up on my neck lanyard instead of my Ti.
Yes, itās greater than the DQA III. Notably longerā¦
Specs from UF-Shop: 5.9cm(L) x 1.3cm(Diameter)
DQA Ti: 57.5mmx12.6mmx12mm
Hello Infinite,
Could you be more specific when you say greater (disregarding dimensions or weight) ?
I finally go around to doing this. Purchased from UF-Shop.
Didnāt like the color, so I sanded and redid itā¦
is it titanium anodizing? :heart_eyes:
Iāve dissasembled the head of teh light. You can anodize the head too!
Yes, I should have mentioned that.
I wanted to keep the head bare at least for the pics. I might do the head, but try the light as a whole. I accidentally anodized the threads on the body and now my light is not very happy.
How many volts have you used for that dark purple anidizing?
It really seems to depend on the item you are doing, but for me, somewhere between 40 and 50 volts. I use batteries so I never really have exact voltage.