Review: L3 Illumination L10 Nichia 219

I have an orange and a white L10 Nichia 918. I love the light, it’s a Nichia damnit, but the colours can be misleading. The orange is nothing like the picture. It is more of a metallic rust red. The white looks good, but I’m pretty sure it’s just white enamel spray paint.

Your ‘orange’ looks a lot like the red they offer

Orange from CPFM post

http://www.cpfmarketplace.com/mp/showthread.php?281491-L3-Illumination-L10-(1xAA)-XP-G2-LED-4-mode-in-Orange-and-Natural&highlight=l10+white

Also, white is different from the HA3 finish of the other colors in this post on CPFM:

” White is unknown. I need your guys’ opinion on White. So far the best they can do is a glossy white finish (anodizing is not a possibility).”

Unless your camera color is off, the one on the left is red. See post #132 in the CPF thread linked above.

Yes, my colour is a little off. It’s closer to gotta zooms pic. It’s still nowhere near the international orange in the stock photos. The white is white-white, not bone, as it appears in my pic. It’s not a big deal with me, I just wanted the Nichia.
I really wanted a pink Nichia so I could trade heads with the white and make a “Nichia Lipstick”.

Thanks very much! Frontpage’d and Sticky’d.

Nice review…

FWIW, I took the following lumen measurements with my DSLR for both lights:

T10: 0.13, 13, 113 (coincidence?)
L10: 0.03, 2.5, 20, 80

(DSLR calibrated off a D25A Clicky)

A couple of things I didn’t see mentioned:

- The L10 uses a foam sponge spring which gives me durability concerns, particularly for a light which needs to be cycled to reach higher modes ie, no memory.

  • The reset time to return to low is a quite long 5 - 6 seconds. I hear there’s a V2 that brings it down to a more reasonable 2-3 seconds.

I’m a big moonlight mode fan but my biggest disappoint that the firefly mode is just too low. The N219 is really a gorgeous tint though.

I have been looking for a small 1xAA pocket light for some time. I finally settled on this model from SBFlashlights who shipped well packaged and extremely fast. It’s got a nice HA3 natural finish in the version I selected as well as an orange peel reflector and anti-reflective lens. The knurling is well done without being overly aggressive befitting a light of this size. The emitter is well centered and has no yellow or blue tinge. The twist head function I don’t find at all objectionable again for something this small. The regulated ~0.1/5/35/130 Lumen spacing I find to my liking. I disagree with those who feel the the super low firefly/moonlight is too low; I deem it very useful. The only nit is the sharp edge to the bottom lanyard cutout. I may have to give it a light pass with a very fine file.

Sure is tiny! :slight_smile:

Just a guess but if you study this and the image of the black / silver light I think it is not a photo but is a rendering out of a computer program. That would be why the color of the actual light doesn't match what is here. For me, the little ripple is the giveaway...just too even. AND... the ripple in both images seems to be identical.

Dan.

Does anyone use a 14500 in their L3 ?

Some folks on CPFmarketplace reported on using a 14500. No increase in output over standard or NiMh AAs. And as long as heat was controlled, no problem.

Now that pocket clips are being made available, I ordered an orange 4500k 92+CRI B10 bin Nichia 219 to go with my natural XP-G2 R5 L10. It has a 2013 serial number whereas the XP-G2 is a 2012. The threads were perfect out of the box allowing effortless one handed operation. The emitter is well centered and no issues have been noted. NICE :slight_smile:

I’ve been looking at these for a while and finally decided to just bite the bullet and order. I got a 3-mode orange with XP-G2 and a 4-mode white with Nichia. Wanted to get them different to justify getting two. Otherwise I would just be buying two of the same thing in a different color. :slight_smile:

Can’t wait until they arrive!

Would love one of these, unfortunately shipping is $15 to my country. :frowning:

Nice Clip, but 15$ shipping to Spain :_(

I got my two copies today. An orange 3-mode XP-G2 and a white 4-mode Nichia 219.

Orange 3-mode XP-G2:

- Even with the same battery as the white, the head doesn’t screw on far enough in my opinion. There’s a gap about the thickness of a penny that’s visible copper. Ruins the look in my opinion, so I’m a little disappointed.

  • Although there’s no moonlight, I think the low is a pretty decent low for practical usage so not terribly upset it’s missing.

White 4-mode Nichia 219:

- The white looks great, but it feels like some sort of metal paint so makes it feel cheap.

- I assume the branding lettering was just painted over, since none of it is visible

- The Nichia is VERY nice. I hadn’t previously really cared about high CRI lights until I put these two side by side. Wow! What a nice natural color!

- The head is much harder to turn on this one than the orange for some reason. Requires two hands.

- I really like the moonlight

  • Like the orange, I really like the fact that it always starts on the lowest. I think I’m now only going to buy lights that go L-M-H from now on.

I wish this was available in pink with Nichia 219. :_(

Yeah… I got a white one a few weeks ago, and when I opened the plastic case it comes in, it smelled exactly like spray paint.
It looks good, and I imagine painting it is the only way to get it white. Maybe not as durable as anodizing, but it’s nice having a light that isn’t black (or gray) for a change.

Hi, er, how well do those clips stay on? Are they tight or do they wobble? Do they have any type of ridge underneath which might fit into the groove on the light to prevent sliding?

I ordered mine without a clip because I generally dislike clip-on clips, but I later realized the light rolls very easily and a clip would help prevent that. I don’t want something which will slide or pop off easily though. Many lights have raised borders around where the clip goes, but this doesn’t. So, I’m hoping the clip itself has a ridge to fit into the millimeter-thin groove under the clip.