3 mode high/mid/low is very good, but i have just ordered one of the first flashlights on DX with the three mode driver, because i don't like all the flashing modes if i use a flashlight in my bike.
The M7X XM-L is very nice. I'd buy this for the looks alone and make it a shelf queen. What can you lose? And it has 3 modes/5 modes option which is good for flashaholics (make the choice when ordering)
Purchased the M7X as a test order as I have not purchased from CNqualitygoods before, and its not cheap at 27 + 6.20 via HK registered airmail....but if Yezl quality is decent then its worth it. (i'm actually ok with dirty/unlubed lights, my Sky Ray 3 x T6 came overlubed with cheapo sewing machine kind of stinky oil which I have to totally flush out with detergent and contact cleaners LOL!) Hope the processing will be as fast as Solarforce-sales / Manafont.
If everything is good with this test order, the silver compact XP-G 16340 and big head zoom XM-L are also killer in looks for the price...will get more.
Somebody, please copy the ZFL-M60. The M7X bears a bit of resemblance to this. I cannot afford to pay $200 for a light and lose it! http://www.elzetta.com/webpages/zfl-m60.htm
Ric-CN shipped out my light last night. Last night also purchased a 8" reflector HID host with 55W ballast. This morning I purchased the T9 big head XM-L zoom at usd30 special price. And I still want the Yezl C2 XP-G R5. Oh ****, so broke now.
Hi RIC, it´s my first post at BLF. I live in Brazil and I´m interested in buying the C2 and the M7X. The total order was U$ 49,00 but I don´t understand if the shipping costs are free because the first one was in chinese caracters and marking U$ 0.Congrats for your products.
Takes in 2.6A from a NCR18650 @ 4.2V. LED is centered, the beam has a really wee bit of misalignment when viewed at 1-3m range but gone beyond that. Its like P60 size but the reflector is a bit deeper, and even though it is OP it throws well with a small hotspot. Has a 20-30% smaller hotspot than P60 XM-L OPs. Really nice design. Surprised that the head is really solid and has some heft, much more than a typical Solarforce L2. The light came with the usual sewing machine kinda oil, so have to clean it out with lots of toilet paper and alcohol (My Sky Ray 3xT6 also came with lose of that. Very smooth though LOL!).
Tint is nice, geez now then i know the Ultrafire P60 XM-L drop-in got a serious green tint problem.
The GITD silicone cap gotta go!
PWM is excellent for a chinese light. Of course iTP is also chinese but its of Olight origin, i think if that is 2kHz freq then this one perhaps 600-700Hz (judging from sound of the freq emitted from covering the head with black T-shirt thus the light flicker hitting it will create a sound with freq the same as PWM). You will absolutely not notice PQM flicker on lowest mode with a person walking across the room only with waving your hand fast in front of the light. Much better than the usual Tank007, Ultrafire etc.
No, but it definitely smokes any P60 drop-in based lights even thought with a same reflector diameter but the M7X is like some 8mm deeper. The M7X OPed hotspot is slightly smaller than even the SMO of the Ultrafire XM-L. Coupled with more output due to less luminous flux drop coz of heat, it is really good. The P60 drops a lot, like 30% due to heat, even with alu foil/heatsink compound and aided by active cooling right at the output of an airconditioner with about 5 deg C wind! Without aid it drops like nearly 50%. I am not making this up, it is on the meter, and also substantiated by LED emitter output calc excel by another member. Pump in say 3.2 amps (and some reported more than that) and 0 for the heatsink.