M4D_M4X
(M4D M4X)
August 23, 2015, 11:01pm
135
i did a testrun today...
XHP35 on noctigon XP-G , not good centered (in depth) strapped on a Ledil Seanna
powered from a LD-2 piggybacked on a 4P->4S converted SRK-clone (LD-2 gets 8.4V)
20cm long cables to the LED / bad heatsink / messy.....
meas@3m
calc@1m
manufacturer
Fenix P36TAC
1344 lx
12096 cd
10000 cd
0,826
acebeam K60
17000 lx
153000 cd
124100 cd
0,811
1405 M4D
52000 lx
468000 cd
XHP35
118000 lx
1062000 cd
849600 cd
<readingx0.8
not bad - or is it?
Here are the HO
http://www.mouser.com/search/refine.aspx?Ntk=P_MarCom&Ntt=124789737
Here are the HI with no dome.
http://www.mouser.com/ProductDetail/Cree-Inc/XHP35A-H1-0000-0D0BC40E3/?qs=cGEy3R83DS%2f0kgKhDWhVQw%3d%3d
Digikey also has some
http://www.digikey.com/en/product-highlight/c/cree/xlamp-xhp35-leds
Cutter has some on MCPCBs and bare
http://www.cutter.com.au/products.php?cat=Cree+XHP35
ReyLight
(ReyLight)
September 12, 2015, 3:48am
138
Thanks,do they ship to China? Price is good. I also conatcted Hank @intl-outdoor. Hope he has some.
I bought a TrustFire X6, will mod it with XHP35.
Edit: the shipping is killing.
ReyLight
(ReyLight)
September 12, 2015, 7:22am
140
It sucks if they use the one-month snail shipping.
Price:7.99
5.64USD (what is this for?)
It says Alum star? I thought Noctigon is made of copper.
M4D_M4X
(M4D M4X)
September 12, 2015, 7:36am
141
mine was shipped with dhl (4 days AUS-AUT)
i bought the HI Version
one on a aluminum star and a bare one (had solder on the contacts - i think they took it off from a star )
ReyLight
(ReyLight)
September 12, 2015, 8:00am
142
That's pretty fast. Do you know what is the 5.64$ for? And is it an aluminium star instead of what the pic shows "Noctigon"?
Edit: Sorry, I just noticed that the HI version is on alum star. Is it a DTP ?
M4D_M4X
(M4D M4X)
September 12, 2015, 8:12am
143
their prices are australian dollars
so its cheaper a lot transfered to USD
for the other questions you have to contact Mark (username welight)
ReyLight
(ReyLight)
September 12, 2015, 8:28am
144
ah,AUD, thank you. It's an Aus based supplier. Price is really good, is it? the other stores sell the bare LED at 7USD,and no free shipping at all.
FlashPilot
(FlashPilot)
September 12, 2015, 4:04pm
145
Thanks,do they ship to China? Price is good. I also conatcted Hank @intl-outdoor . Hope he has some.
I bought a TrustFire X6, will mod it with XHP35.
Edit: the shipping is killing.
I bet the X6 would make a great host for the XHP35. Did you find an additional extension tube that will fit to make it 4S?
I had the same idea for my X7 but cant find an extension tube that would fit.
ReyLight
(ReyLight)
September 12, 2015, 5:41pm
146
Damn, 3S could work, but not as better as a 4S. Will be checking TF if they can sell me another tube.
M4D_M4X
(M4D M4X)
September 12, 2015, 6:02pm
147
3S is not enough
not even with HE2…
3s is definitely not going to cut it. Not enough voltage to get any real power out of this emitter.
doubleone44
(doubleone44)
September 12, 2015, 6:21pm
149
Couldn’t you just put in 4x 18500 instead of 3x18650? That way it fits and you get your volts without an extra extension tube.
FlashPilot
(FlashPilot)
September 13, 2015, 7:40am
150
He could, but then runtime would be fairly pathetic. The glory of this light is in its heat sinking and extended run time because of it…
ReyLight
(ReyLight)
September 13, 2015, 6:21am
151
What resistor did you use to zener mod? Still the 200r?
ReyLight
(ReyLight)
September 13, 2015, 6:24am
152
What zener and resistor did you use to mod?
bibihang
(bibihang)
September 13, 2015, 4:29pm
153
Not sure if this has been asked before, when one uses a linear driver to drive the 12V XHP-35 emitter, wouldn’t the 4S batteries kill the XHP-35 immediately due to the extra 4V?
M4D_M4X
(M4D M4X)
September 13, 2015, 3:07pm
154
not really…
did you read my graphic?
for 3A that led needs 15V (when cooling is good it is surviveable i hope)