Thanks! You should convince someone to carry this! The price listed is ~$45USD. I think they would be very popular if under/around $50. Especially if they have the typical palight quality
Thanks! You should convince someone to carry this! The price listed is ~$45USD. I think they would be very popular if under/around $50. Especially if they have the typical palight quality
You are referring to the small light on the left? >> Z3-S(2016)
ChibiM wrote:
What's that shiny one?
Added more info on OP.
mattlward wrote:
That link went to a site I could not read...
LoL. My eyes playing tricks on me last night.
koyotee wrote:
freeme wrote:
I see MT-G2.
Look again ;)
BOSS1 could be their flagship model. In customer feedback section, Palight rep replied that they would continue to improve on the design, and they could come out with a 4x XM-L2 model in future.
I wonder how big the reflector is, does anyone know or can give an estimate on just how big.
As a carriable thrower for really long running times at max this should be as good as it gets
And the price isen’t bad either.
Well the tube has to be 55-60mm maybe more, the head is a fair bit wider… 80-90mm?
Really hope this ends up like the Courui and gets picked up by multiple vendors for a solid price. I don’t even have 4× 26650 cells, but I would definitely pick up a set for this beast. Hopefully it has an integrated shelf and good build quality throughout.
freeme, is the driver a 1S driver? I see there is a B3+ on the middle pin. I’m assuming this is for a single cell in the middle of the battery tube. Is this correct?
—
My gratitude to those who are willing and able to help others (in whatever way you can)! Being human is more than just existing for yourself.
80-90mm head sounds really good I hope you are right.
If you are this could be the pre built kaidomain big reflector equivalent light, many(? i have at least ) have been waiting for. For much less than actually building one based on the Courui yourself.
That should mean 800kcd+ with a hard driven dedomed XP-G2 S4
And massiv +1 on just the light and not some silly charger & cells of unknown quality.
If the head really are that big we are looking at the new king of budget throwers here in the BOSS, maybe they can do a slim version also with the same reflector.
EagleTac has already proven the market with there very expensive M25C2 Turbo, they could do a budget version for much less. If they can sell the boss for 45$ with charger and cells, they should be able to do a slim for 30-35$ because of much less material and cheaper thinner alu stock, that would sell crazy numbers
1S most probably (98%). According to the description, center contact pin is there so that you could power it up with one 26650.
eebowler wrote:
freeme, is the driver a 1S driver? I see there is a B3+ on the middle pin. I'm assuming this is for a single cell in the middle of the battery tube. Is this correct?
The black a no looks nicer but the design itself id not very appealing!
Words can be broken,
so can bones.
reminds me a bit of my Roche LS01 (which is a well-built light)
My Favorite Modded Lights: X6R, S8 , X2R , M6, SP03
Major Projects: Illuminated Tailcap, TripleDown/TripleStack Driver
It has the classic touch, good body ratio and quality imo. Pricey $3X.
By the way it was designed in 2013.
New BOSS light 4x26650!!!
I need a link for that one! I have been looking for a monster-sized reflector light
My Favorite Modded Lights: X6R, S8 , X2R , M6, SP03
Major Projects: Illuminated Tailcap, TripleDown/TripleStack Driver
+1
link to djozz tests
I assume 2×26650? What LED? The second one looks fun, but not sure what I would need it for. Bet it throws well.
EDC rotation:
FW1A, LH351D 4000k (second favorite)
FW3A, LH351D 3500k
FW3A, SST20 FD2 4000k
FW3A, Nichia 4000k sw40 r9080 (favorite light!)
FW3A, Cree XP-L Hi 5A3
Emisar D4V2, SST20 4000k
S2+, XM-L2 T6 4C
http://bit.ly/1MAsOqE (Palight TMALL) Price RM289 1.2KG w/o batteries.
Thanks! You should convince someone to carry this! The price listed is ~$45USD. I think they would be very popular if under/around $50. Especially if they have the typical palight quality
My Favorite Modded Lights: X6R, S8 , X2R , M6, SP03
Major Projects: Illuminated Tailcap, TripleDown/TripleStack Driver
I see MT-G2.
What's that shiny one?
The Eneloop 2005-2019 info thread
Holy crap! That thing is massive $45?!
1600 lumens? 600-800m throw? Either way, GOOD CHUNK OF METAL and huge reflector for even $55…. wait, what’s shipping??
My gratitude to those who are willing and able to help others (in whatever way you can)! Being human is more than just existing for yourself.
Look again
Finaly, proud owner of a Powerex Maha mh c-9000 for my Eneloops:)
Maybe a typo? ..
That link went to a site I could not read…
EDC rotation:
FW1A, LH351D 4000k (second favorite)
FW3A, LH351D 3500k
FW3A, SST20 FD2 4000k
FW3A, Nichia 4000k sw40 r9080 (favorite light!)
FW3A, Cree XP-L Hi 5A3
Emisar D4V2, SST20 4000k
S2+, XM-L2 T6 4C
exactly. We need BG or GB or FT to decide to sell them
My Favorite Modded Lights: X6R, S8 , X2R , M6, SP03
Major Projects: Illuminated Tailcap, TripleDown/TripleStack Driver
Wow that is a ridiculous fat light
I wonder how big the reflector is, does anyone know or can give an estimate on just how big.
As a carriable thrower for really long running times at max this should be as good as it gets
And the price isen’t bad either.
You are referring to the small light on the left? >> Z3-S(2016)
Added more info on OP.
LoL. My eyes playing tricks on me last night.
BOSS1 could be their flagship model. In customer feedback section, Palight rep replied that they would continue to improve on the design, and they could come out with a 4x XM-L2 model in future.
Now that looks nice!!! J)
Words can be broken,
so can bones.
Well the tube has to be 55-60mm maybe more, the head is a fair bit wider… 80-90mm?
Really hope this ends up like the Courui and gets picked up by multiple vendors for a solid price. I don’t even have 4× 26650 cells, but I would definitely pick up a set for this beast. Hopefully it has an integrated shelf and good build quality throughout.
Alright freeme, when’s the groupbuy? 50 pieces should be easily doable, maybe even 100?
My Favorite Modded Lights: X6R, S8 , X2R , M6, SP03
Major Projects: Illuminated Tailcap, TripleDown/TripleStack Driver
30-50pcs figure is enough to start a GB. Are you guys really interested?
Buyers pics from TMALL. RM289 comes with 2x26650 and 2 bay charger.
I don’t suppose there’s any chance of getting a review sample to drum up even more interest?
It comes with the charger and batteries? I wonder if they would ditch those to keep the price lower…
My Favorite Modded Lights: X6R, S8 , X2R , M6, SP03
Major Projects: Illuminated Tailcap, TripleDown/TripleStack Driver
freeme, is the driver a 1S driver? I see there is a B3+ on the middle pin. I’m assuming this is for a single cell in the middle of the battery tube. Is this correct?
My gratitude to those who are willing and able to help others (in whatever way you can)! Being human is more than just existing for yourself.
80-90mm head sounds really good
I hope you are right.
) have been waiting for. For much less than actually building one based on the Courui yourself.
If you are this could be the pre built kaidomain big reflector equivalent light, many(? i have at least
That should mean 800kcd+ with a hard driven dedomed XP-G2 S4
And massiv +1 on just the light and not some silly charger & cells of unknown quality.
If the head really are that big we are looking at the new king of budget throwers here in the BOSS, maybe they can do a slim version also with the same reflector.
EagleTac has already proven the market with there very expensive M25C2 Turbo, they could do a budget version for much less. If they can sell the boss for 45$ with charger and cells, they should be able to do a slim for 30-35$ because of much less material and cheaper thinner alu stock, that would sell crazy numbers
1S most probably (98%). According to the description, center contact pin is there so that you could power it up with one 26650.
I will drop vendors a PM now.
This looks very interesting to me, but I would like to see that there is metal in there to conduct heat… a nice thick shelf would be nice!
EDC rotation:
FW1A, LH351D 4000k (second favorite)
FW3A, LH351D 3500k
FW3A, SST20 FD2 4000k
FW3A, Nichia 4000k sw40 r9080 (favorite light!)
FW3A, Cree XP-L Hi 5A3
Emisar D4V2, SST20 4000k
S2+, XM-L2 T6 4C
I’d be interested in one from a half reliable source.
Pages