GANZO KNIVES, 6&7-SERIES

+1111111
Thanx a lot!!

Very nice compilation!
I have many on the list, but was also unaware of the existence some (G738, G739, G7392/3).
I’ve been very pleased with most of them with the exception of the G718 series (axis lock fails too easily, and difficult to disassemble).
My G729s arrives last week, and I am impressed with their quality for the price.
Nice work McNugget!

G720 and upwards Ganzo seems to have the manufacturing right, considering QA and HT
Updates of earlier models have gained this QA improvement too
No more hollowed stop pins :slight_smile:

Stores I shop at:

I have been using all of the above shops, and lately the Ali shops Blade Forum & DAI the most

Another shop, I am yet to use

I have had:

G707 x2

G719 -b

G7211 -b

G7212 -b x2 & g x3

All quality has been top notch and all come pretty sharp for factory edge. I think all but two was able to shave hair.

Only problem I have encountered was one of my g707s clip bent, and the point was thin and long... Not the right words I'm looking for, but makes it look like it will break easy. Never did though. My first got about a year of carrying, then sold it for $30 and bought another lol

Good job! :beer:

The G7211 and the G7212 remind me to the Emerson Viper.

Who sell the Ganzo G7041 Stonewashed blade - I have never notice this before (amazon.com isn't an option for a purchase)?

Amazing post, thanks for sharing your hard work.

I found the G704 is a terrible slicer though, the blade is too thick.
Since one of the primary (in my opinion) edc functions is slicing I wonder how the other in the 7xx series are? Especially the 729 and 7392.

Anyone have these yet? The only reviews I can find on youtube are in Russian.

Though the g7211 and g7212 are close to the emerson viper, I would not say it is a clone of it. The blade and handle is significantly different... and the Ganzo is auto. Looks similar, but not quite close enough to consider it a clone

Well the 729 is a clone of the Paramilitary 2 which is well known to be a good slicer and has a huge following.

Oh man, it s that we got no need for a knife like this, but those 708 and 709 ones are really beautifull!

Ganzo, copy some models from cold steel xD. I will buy it.

At botdcypher2009@Ebay

I bought mine from Blade Forum@Aliexpress where it is no longer listed

I do not have a 704, but the 727 and 729 I have are both flat ground blades and good slicers in my opinion. The 727 is a surprisingly comfortable handle and a great general purpose blade style. The 729 is a flatter edge (less sweep toward the tip) and is good, but not as versatile to me… A 727 blade with a hole for opening would be a good all around blade.

Nice post
the models G716/G716-S are very similar looking to the model Heckler & Koch 6000010SBK MP5 AUTO
The model G713 looks like the SOG FF11 Salute
And the model G719 looks like the SOG FF-30 Fielder

Added
Thanks for the contribution

Want to try one of these; need something in assisted opening ( with lock) and 3.75” ( 95mm+) blade; any recommendations ?

thanks great list to compare

There is not any knives from ganzo, automatic and with 95 mm or more. With 85 mm or so there are some like ganzo g707, g719, g721, g736…

Just ordered the 718
Had store credit, some points to use , only needed $2,- from PayPal.

I just got my G728 in safety orange and it’s fantastic. This is one of the best Chinese knives I’ve bought and I’ve bought many, so I’m going to do a review of it.