M4D_M4X
(M4D M4X)
March 14, 2016, 11:03pm
1
Hey my friends!
i found a bit time to make a short video for you:
i did not wire the driver and tailcap springs to keep the max Amps a bit lower...
Amps
Lumen (corrected to Fenix P35)
8,3V from powersupply / stock Light
0,24
209 (rated 55)
0,76
591 (rated 350)
1,97
1364 (rated 1200)
2,23
1900 (rated 2000)
30Q (8,2V) / modded
0,245
209
0,85
673
2,25
1536
6,3
3136
8,3V from powersupply / modded
0,24
209
0,85
682
2,25
1627
7,2
3364
conclusion:
a very good light - modded even more!
-> of corse i have a code for S50 and S70 ;)
Easyrr
(Easyrr)
March 14, 2016, 11:17pm
2
Martin, I think this light will sell out in seconds after your modding hints. Very professional way to introduce a great flashlight btw. Thank you!
M4D_M4X
(M4D M4X)
March 14, 2016, 11:19pm
3
… its sold out atm at banggood
(maybe because it has a good code also )
Easyrr
(Easyrr)
March 14, 2016, 11:20pm
4
Oh it’s already sold out, my bad
Nice review and modding, I might just try that solderblob and skip the dedoming, kind of like the throw/flood as it is.
Try Amazon (.de) last time I checked there was stock and fast delivery.
will34
(will34)
March 14, 2016, 11:37pm
6
Great video, such an easy and effective mod, now I really want a S50.
Do you think one could install a SMD resistor instead of directly bridging it? To lower the amp draw at turbo to 4-5A, since there is very little gain after 5A anyways.
M4D_M4X
(M4D M4X)
March 14, 2016, 11:44pm
7
of course you can use a resistor - but which value us the question…
Very nice review and mod demonstration. Thanks, M4D M4X.
Very cool!! Excellent presentation.
jescereal
(jescereal)
March 15, 2016, 3:13am
10
Great review! So the solderblob has no effect on the lower mods? Just on high mode? Does it still have the stepdown timer?
NikolaS
(NikolaS)
March 15, 2016, 5:37am
11
Great video Martin, very easy mode :heart_eyes:
M4D_M4X
(M4D M4X)
March 15, 2016, 6:08am
12
thanks guys!
i am sorry for the bad quality as i only have my mobile phone for videos…
i have to find another lightsource - the LEDbulbs i used (IKEA) seem to flicker a bit
i will do the S70 in a similar way (hopefully with less silver Fingers…) soon.
MRsDNF
(MRsDNF)
March 15, 2016, 8:34am
13
Thanks MM. Nice review with bonus mod to boot.
Hey mate nice video thanks.
what tool do you use to open the driver makes it look so much easier?
jhalb
(jhalb)
March 15, 2016, 9:26am
15
You could try an R1 or R050 SMD resistor to lower the amps a little.
gorb507
(gorb507)
March 15, 2016, 12:27pm
16
Well done! Looking forward to your S70 review/mod.
M4D_M4X
(M4D M4X)
March 15, 2016, 12:34pm
17
stock was “loose“ and i opened it by turning the driverspring only.
after adding the thermal paste two fingets sre needed:D
tarver
(tarver)
March 15, 2016, 4:42pm
18
Everything was great except for the silver fingers. You should amputate them right now.
Hey, good review. I like that light, it seems like a solid build.
jescereal
(jescereal)
March 15, 2016, 5:07pm
20
Does the solderblob have effect on the lower mods? Or just onthe high mode? Does it still have the stepdown timer?