Anyone seen a good price for a pressure washer? Thanks!
well, went back to check about 2 boxes of armormax 3Ds i had seen when they were still at the 3 price. they were on an overhead shelf, and i thought maybe i will spiderman my way up. come to see they have been moved to over the overhead shelf with the netted enclosure… can’t spiderman my way into that… think i could risk asking an employee to get me a few of those?
i found and bought some of those maglite 2D xenon bulb replacements for a penny 
no use for them, but hey they cost me a penny each - again thanks to dchomak for alerting; they were actually marked at 1.03 - who would buy them for that price?
If they go for a penny i will personally drive down to the US and buy them!
It is raccoon sized 
They see me rollin'.
They hatin'.
Find Tesla Dealers in Raccoon, Kentucky
http://www.edmunds.com/dealerships/Tesla/Kentucky/Raccoon-1.html
Dang! You beat me to it! Saw this last night:
Also saw this one:
Saw the power inverters too, but I already have the HDX 100watt w/USB one from a few years ago.
No “good” deals found. The Milwaukee tools were all regular price (swear I saw yellow stickers on Saturday). The Husky LED Work Light didn’t exist at my store.
-Garry
The husky worklight at my store is still full price.
Some stuff at some stores just don’t go on clearance.
There were other Husky LED work lights, but not this 800 Lumen model posted above.
-Garry
I stopped on my way INTO work today and snagged 3 more of the 800 lumen Husky work lights (all they had) for the same $8.83 price. I’ll probably post some pics and ask for some help modding it in a new thread this weekend.
Quick into from some testing last night:
AC-DC convertor in the back, outputing 27.8 volts.
“Bridgelux” LED on a star mounted behind a stout glass lens
Between lens and star is a virtually flat “reflector” that can’t possibly be doing anything except hiding wires.
I wonder if it would be effective to mount two or more of those lights onto a stand or fixture, then wire them in parallel… switch option to run 2 or 4 lights simultaneously.
Easy to do, if you are comfortable doing AC wiring. I have enough plug in trouble lights, I really want to get these molded into battery power models - ideally using my Cordless tool packs but I might even use some of my laptop pulls with a cheap charging board from mtnelectronics.com screwed into the back area. I left the last set mostly intact, so I have 4 pairs welded together.
These lights finally went to the 3 price. $2.53 Rechargeable Flashlight that plugs into the wall and turns on with a power outage;
Got another of the Husky twin packs. The 3C model is an XP-L and 500 Lumen. the 3 - AAA model is 165 lumen.
This time for a penny
I didn’t notice until I got outside, where did the batteries go?
Just a few miles away from the store that had these for a penny, they were marked down from 11.97 to 6.98. I did scan the price
This store had that same 100W power inverter and 2A USB charging station priced at $27.06. Scanned for $8.83
One of the power invertors on a welcome mat on clearance. I bought 4 of the mats.
Got 2 of these for $4.83. Last 2 in my area. It’s actually fairly decent. It can use 3xAA or 3xD batteries. It has a plastic insert that holds the AA batteries in place.
Of course i’m going to have to try a Li-Ion with 2 dummies to see how that works out!
Anyone have the sku number for those Husky 800 lumen worksites?
I’d like to check local inventory.
Thanks!
These are ringing up a little under $9 down here. I bought as a potential father’s day gift. Pretty nice units. Built very solid. Appear to be highly water resistant and build to run continuously and last a long time. Not sure what emitter is in it. Puts out a extremely wide, even, wall of light. Tint and color rendition are ok. Would like it to be better, but it’s acceptable. Especially at $9.
Number per the above pic appears to be 0000-480-624.
Thx for sending me to HD again.
As soon as anyone gets one of these work lights for a penny please let the rest of us know.