No, bad white balance on cheap camera, I should have tried different setting, sorry.
I’ll try again tonight.
Seems pricey for what they’re offering.
Muto… I received one as well. I completely agree with your summation. I will not be posting a review here as it would be identical to yours. I did post the first review on Amazon, if anyone is interested.
I really like it. 14500 and memory would make it just darn near perfect!
Thanks Matt!
I new whoever posted it on Amazon was well versed on flashlights and thought it may be a member from here but wasn’t sure who it was.
And to member greenlight’s point, it is not a cheap flashlight but that was not their intent. It is glued like the Zebralights, so it is not intended to be mod friendly by the Mfg. That can be a good thing or a bad thing depending on the users skill level.
I must say it is darn hard to get most flashlights apart without getting some dust on the reflector and once it’s there….
Anyway it is what it is.
Thanks
Keith
+1
A little over priced but nice.
Nice review!
On first beamshot picture, I thought the lines were PWM 
Cheers for your review.
At a first glance this should cost about $20-$25…almost $40 is too expensive.
Thanks for the review, Muto. Picture #6 had me confused for a while; thought this light has a head spring (+ve) as well! (does it?)
Cheers.
No head spring, here is picture down the throat as it were. Brass colored contacts.
HTH
Thanks again!
Keith
Mine hasn’t arrived yet, still waiting.
Question, you say ” well regulated and steps down as voltage drops”
does that mean a low voltage warning stepdown? Or a slow decrease in brightness as the battery gets drained?
Thanks for the review.
I put a Keepower 3.7V 14500 in mine and it works just fine.
How much did you all pay for the torch with the promise to review it?
They sold me one for $5 from Amazon.
This was the first time I’d been offered a discount on a purchase with the agreement to review it.
I pointed out part of their description was copied from a different manufacturer of a 4AA flashlight.
They replied
and later
That seemed bogus. Anyone know? I wondered who’s giving them advice about how to sell on Amazon.
I wrote an honest review at some length, stating what I paid and what I thought needed improvement and why.
They asked me to change it after I posted it, for reasons I won’t (yet) post here, but I wonder if anyone else had such happen.
I have been too busy to post my review. I paid $5 as well. This is a $20 light at most. It isn’t a good tactical light because it starts on low and has a reverse click switch. I am wondering if this “review plan” of theirs is not going well.
How long has it worked fine??? Brightness increase?
PM sent.
All in all I have run it for an hour. Not straight for one hour. The brightness didn’t really impress me, I have no real way to measure it.
The specs for the price are still good if you look at other brands like LED-lenser similiar output for about the same money but this is built better.
Agreed, but not a true budget light and not a good mod candidate. I have tried fairly hard to open mine and it is just glued to well. I have not tried placing the head in solvent yet, may be the next step. Has a very good beam profile, just needs more lumens and a good driver.