Built my first triple! EE X6 XP-L V6 3D triple 11,3A

I built one a few days ago with XP-L V6 0Ds…she puts out a lot of light. Since I put a fet in my L6, the L6 is a tad bit brighter.

Switch PCB link

Haha new avatar! Fitting!

Nice to see your successful triple build. Looking good!

My favourite built light :slight_smile: for now…
I want to sell my Palight Boss1 but if I don’t I will build a triple C8 reflector monster of It with three XP-L HI or dedomed XM-L2 and between the three C8 reflector will be an S2+ reflector or a carlco 10507 with triple XP-L for flood. Independent switches for throw and flood. :smiley:

Ha do not sell that boss1…/serious you cannot sell it now :wink:

I seriously need now a lathe :person_facepalming:

Those pre-drilled holes look nice, but then I wouldn’t have much use for my dremel anymore, lol.

Love it!

Will that upgraded switch PCB fit in a S2+ or BLF A6?

The diameter is 17mm. I can measure my S2+ tomorrow but I think it will fit too. The A6 I don’t know cause I don’t have that.

Nice build!

I agree it is a must-have (and although I have the parts ready for many months, I do not have it :person_facepalming: )

Most excellent! Is that the Ledil Cute triple lens? Have you thought of sanding it out flat or are you happy with the pattern/output?

Yes Ledil Cute lens. I thougt about polishing but I try to use it this way and if I like it I will leave it that way. I built it one day ago so not used it much.

My grey S2+ switch PCB is 16.15mm but it has more room so very tight but it will fit.

congrats…perfect work.i dream about my quad xpl…sadly,too much work i guess:))

Thank you all! More pics and videos coming later. Today I want to make the lighted tailcap for it.

:beer:

Nice build Zozz. You have built the V6 now for the V8. :wink:

And the lighted tailcap is working :smiley:
I used BLF A17DD driver, and 470 Ohm bleeder resistor on driver and 47KOhm resistors for each pair of the 6 leds in the tailcap. In the tailcap I used PD68s rev5.1 led ring board instead of the stock aluminum washer. This is for the 14mm rubber boot.
The six leds eat 0,106mA so if I use a 3000mA battery it will last for about 19 days.





Is that 0.106ma, or one tenth of a milliamp?

If so, that’s
3000mah / 0.106ma / 24hrs / 365days = 3.23 years

Either way, it looks great!