Bullshit, I’m out, don’t care for a flashlight that can’t be opened, first of all i had plan to coat the copper piece so it will prevent patina, now i can’t or ill need to damage the head trying to open it, thumbs down for whoever the manufacturer is.
Please take note that S41S’s head assembly will be glued. Producer does not want buyer to mess with the components.
I do not see this as a good practice. It basically allows the manufacturer so stuff whatever kind of crap they want in there and we just have to live with whatever it might be. Personally I don’t like it one little bit. I’ll have to thing long and hard about whether or not I still want to be a part of this.
Edit: also consider that those of us who really want to can and will get around the glue and expose whatever is inside anyway. So what the hell is the point? Just wasting our time and potentially scarring up our lights getting them apart.
First of all, you guys have to understand that upcoming S41S is just a stainless steel version of S41. Neither it is going to be S42 nor S41 II, which I have suggested repeatably to them since May. I am aware of the safety concern for previous MCPCB design issue and the washer fix method that came after that.
May know how many S41 buyer(s) have their light becoming faulty directly due to it? Without figures, we can't tell how bad the situation really was.
Just to let you know that I am not a Banggood employee and I have very limited influence for its design. However, Neal did ask me assess S41S and give him feedback after I have tested it.
It would be very important to know before ordering if the safety concern mentioned in post #132 was properly resolved. We do not expect new features, but the known problems must be corrected, and we need to be sure that this is indeed the case.
Just to let you know that I am not a Banggood employee and I have very limited influence for its design. However, Neal did ask me access S41S and give him feedback after I have tested it.
My post was not aimed towards you or your effort to bring this flashlight to BLF, it was aimed to the manufacturer who i know that wont read that and i must say that im disappointed because i like the flashlight but glued head is no go for me, probably can be opened with brute force but doing that will damage something for sure.
After some thought, although I’m not happy about it, I’m not going to back out due to the glue issue. One of the lights is a gift for a friend and won’t need to be opened. As for mine I assure you I will get it open one way or another, I’m 99% sure I can do it without damaging anything.
Freeme my comments above were in no way directed towards you. I was merely expressing distaste for the manufacturer trying to, in my eyes, hide what they are doing. What you do for the members here is very much appreciated. Thank you.
P.S. If I’m successful in opening mine I would gladly do the service for anyone else willing to pay the shipping fees.
Both the bare steel and rainbow steel look nice. I’m concerned about the glue though, and the likelihood that it might use the same green 219B emitters as the original. If I got one, I’d want to modify it. Or even better, empty host with no driver and no emitters on the MCPCB. Is there any chance of that?
I'm already in for One S41S with Nichia and 18650 Tube. If's it's not too late, I'd like to add one colored w/colored tube, also Nichia
My vote, if I even get a vote, is also no glue, but these will probably be dedicated weapons lights so I can live with it if I have to, I want both either way.
I already have a Manker E14, 4 matched rose colored nichias, works and performs flawlessly. NOTE: I initially put "De" brand 18350s (protected circuit) in it, and they would not go into turbo mode (but worked fine everywhere else. I then put nitecore 18350s in it and everything worked fine, even turbo. Then I put Orbitron 3500ma (rated) 18650's (protected) in and every setting worked perfectly except they were all noticeably brighter on all settings. It also weighs twice as much and you lose the small form factor, so I'll just switch back and for as needed.
Anyone know when we can expect these and how we go about paying for them and obtaining them?
(“It’s good that most people can’t remember their previous lives. Otherwise
things would be a lot more complicated than they already are.”
Ajaan Lee Dhammadharo)
After seeing the HT version I think I am going to change my mind. Too Green, was hoping for more Blue. I understand there will be variations and every one should be different… Perhaps I will do it myself later.
@ Miller, I have seen vids of heat treating (coloring) stainless Vape box mods. Material on these are thick and may prove to be different. Titanium is easier with better coloring.
Freeme; Please change mine to No Heat Treatment.
Anyone catch the XP-G3 button selection and XP-G2 in description of the plain SS?
BTW: It is really heat treated or is it some sort of rainbow effect anodizing that we have seen on many ecig related products – there is a name for that but don’t remember it right away…?
BTW: It is really heat treated or is it some sort of rainbow effect anodizing that we have seen on many ecig related products – there is a name for that but don’t remember it right away…?
Yes, why i decided to cancel the “Heat Treatment” from my purchase. It looks funny to me too. Like a coating that will wear off.
BTW: It is really heat treated or is it some sort of rainbow effect anodizing that we have seen on many ecig related products – there is a name for that but don’t remember it right away…?
Yes, why i decided to cancel the “Heat Treatment” from my purchase. It looks funny to me too. Like a coating that will wear off.
Please put me down for one S41S Nichia and 18650 tube.
One S41S with Nichia and 18650 Tube.
Thanks
Please take note that S41S's head assembly will be glued. Producer does not want buyer to mess with the components.
FreeDailyDeals | Freeme's Group Buy / Freeme Club ★★★★★ / Niwalker Giveaway 2018
Bullshit, I’m out, don’t care for a flashlight that can’t be opened, first of all i had plan to coat the copper piece so it will prevent patina, now i can’t or ill need to damage the head trying to open it, thumbs down for whoever the manufacturer is.
Olight i3s, Olight S1, Olight S Mini, JetBeam Jet-1, BLF 348, Astrolux S41S, UF SK-98, Convoy S2+ 3*XP-G2, Convoy S2+ 3*XPL, Convoy S2+ 219CT, Convoy M1, Convoy C8, Brinyte B158, Courui D01, Convoy L6, Noctigon M43
I am out
I do not want an Astrolux glued, especially without knowing who the producer. Sorry
Sorry for my bad English (gogole transtorla)
im out too if the head is glued.
Kinda useless to me if i cant mod them latter
I do not see this as a good practice. It basically allows the manufacturer so stuff whatever kind of crap they want in there and we just have to live with whatever it might be. Personally I don’t like it one little bit. I’ll have to thing long and hard about whether or not I still want to be a part of this.
Edit: also consider that those of us who really want to can and will get around the glue and expose whatever is inside anyway. So what the hell is the point? Just wasting our time and potentially scarring up our lights getting them apart.
Now i bet again that the “New manufacturer” is just the old one
…..
- George
My Reviews : KDlight C8 / ThruNite Archer 1A V3 / Thorfire C8s / ThruNite TN12 (2016) / Utorch UT01 / Utorch UT02 / Jetbeam WL-S2 (xp-l) / ThruNite TC12 V2 / Massdrop Brass AAA / Manker LAD / Lumintop SD26 / ThruNite Mini TN30 (3x xm-l2) / Qualilite D81 / Nitecore MH20GT / Odepro TM30 / Klarus XT30R / Nitecore NU20 CRI / Ultrafire XM-L2 / Foursevens Mini MK II / Manker E02 / Manker E14 II / Teekland Flashlights / Lumintop Elfin / Thorfire S70S / ThruNite Neutron 2C / Jaxman M8 / KDLITKER C8.2 / Zanflare F1 / Nitecore Concept 1 / Emisar D4 / Astrolux MF-01 / ThruNite TC10 V3 / Amutorch JM70 (xpl hi)
Makes me wonder what they’re trying to hide…
Don’t they understand that it will scare off potential customers?
“My collection”: http://budgetlightforum.com/node/10711?page=4#comment-700139
First of all, you guys have to understand that upcoming S41S is just a stainless steel version of S41. Neither it is going to be S42 nor S41 II, which I have suggested repeatably to them since May. I am aware of the safety concern for previous MCPCB design issue and the washer fix method that came after that.
May know how many S41 buyer(s) have their light becoming faulty directly due to it? Without figures, we can't tell how bad the situation really was.
Just to let you know that I am not a Banggood employee and I have very limited influence for its design. However, Neal did ask me assess S41S and give him feedback after I have tested it.
FreeDailyDeals | Freeme's Group Buy / Freeme Club ★★★★★ / Niwalker Giveaway 2018
It would be very important to know before ordering if the safety concern mentioned in post #132 was properly resolved. We do not expect new features, but the known problems must be corrected, and we need to be sure that this is indeed the case.
My post was not aimed towards you or your effort to bring this flashlight to BLF, it was aimed to the manufacturer who i know that wont read that and i must say that im disappointed because i like the flashlight but glued head is no go for me, probably can be opened with brute force but doing that will damage something for sure.
Olight i3s, Olight S1, Olight S Mini, JetBeam Jet-1, BLF 348, Astrolux S41S, UF SK-98, Convoy S2+ 3*XP-G2, Convoy S2+ 3*XPL, Convoy S2+ 219CT, Convoy M1, Convoy C8, Brinyte B158, Courui D01, Convoy L6, Noctigon M43
After some thought, although I’m not happy about it, I’m not going to back out due to the glue issue. One of the lights is a gift for a friend and won’t need to be opened. As for mine I assure you I will get it open one way or another, I’m 99% sure I can do it without damaging anything.
Freeme my comments above were in no way directed towards you. I was merely expressing distaste for the manufacturer trying to, in my eyes, hide what they are doing. What you do for the members here is very much appreciated. Thank you.
P.S. If I’m successful in opening mine I would gladly do the service for anyone else willing to pay the shipping fees.
Both the bare steel and rainbow steel look nice. I’m concerned about the glue though, and the likelihood that it might use the same green 219B emitters as the original. If I got one, I’d want to modify it. Or even better, empty host with no driver and no emitters on the MCPCB. Is there any chance of that?
I'm already in for One S41S with Nichia and 18650 Tube. If's it's not too late, I'd like to add one colored w/colored tube, also Nichia
My vote, if I even get a vote, is also no glue, but these will probably be dedicated weapons lights so I can live with it if I have to, I want both either way.
I already have a Manker E14, 4 matched rose colored nichias, works and performs flawlessly. NOTE: I initially put "De" brand 18350s (protected circuit) in it, and they would not go into turbo mode (but worked fine everywhere else. I then put nitecore 18350s in it and everything worked fine, even turbo. Then I put Orbitron 3500ma (rated) 18650's (protected) in and every setting worked perfectly except they were all noticeably brighter on all settings. It also weighs twice as much and you lose the small form factor, so I'll just switch back and for as needed.
Anyone know when we can expect these and how we go about paying for them and obtaining them?
Thanks,
Spartacus
I am also in for a Nichia 219B and 18650 tube. Thank You
Hi,
If I understand correctly, it’s $38 for an 18350 stainless, 4*Nichia LED, NOT (heat) colored flashlight ?
So count me in for one, with an 18650 extension tube (stainless, not heat colored) ( I did not see the price for this tube)
Thanks !
Hi,
I’m in for one S41S Nichia + 18650 tube, heat treated version.
Thanks !
2 flame nicha with flame ext tubes
(“It’s good that most people can’t remember their previous lives. Otherwise
things would be a lot more complicated than they already are.”
Ajaan Lee Dhammadharo)
One with CREE and heat-treated. Also the tube heat-treated.
Is the Heat treatment option going to cost more? If so how much?
What is the cost of the 18650 tube?
And Heat treated tube?
Re-read through and can’t find anything.
View BLF with NO Commercials Here!
both lights are on banggood website now
stainless steel version
heat treated version
I just saw that too. No 18650 tube yet…
Now we need the GB code…
still, could heat treatment be done by ourselves
Or would the glue be in the way for that?
It is done when it is done
How my BLF Specials generally work, please read before asking Qs
The Q8, Exciting a groupbuy for a Premium BLF special high lumens soda can light!
The GT, A BLF special GIGA thrower
The FW3A, a TLF BLF special small, elegant, powerful triple
Lithium Ion safety 101 important read
Sorry grammarlovers, I am a real King Typo.
After seeing the HT version I think I am going to change my mind. Too Green, was hoping for more Blue. I understand there will be variations and every one should be different… Perhaps I will do it myself later.
@ Miller, I have seen vids of heat treating (coloring) stainless Vape box mods. Material on these are thick and may prove to be different. Titanium is easier with better coloring.
Freeme; Please change mine to No Heat Treatment.
Anyone catch the XP-G3 button selection and XP-G2 in description of the plain SS?
View BLF with NO Commercials Here!
Both S41S and S41S colored have arrived today
FreeDailyDeals | Freeme's Group Buy / Freeme Club ★★★★★ / Niwalker Giveaway 2018
BTW: It is really heat treated or is it some sort of rainbow effect anodizing that we have seen on many ecig related products – there is a name for that but don’t remember it right away…?
Nichia 219B/CREE Color-crazy!
FAVES
EDC Torches
Yes, why i decided to cancel the “Heat Treatment” from my purchase. It looks funny to me too. Like a coating that will wear off.
View BLF with NO Commercials Here!
Gay tube?
FAVES
EDC Torches
Pages