good 3mode driver/xml led combination up to 8.4v

6 posts / 0 new
Last post
jamesearljonesi...
jamesearljonesisascab's picture
Offline
Last seen: 2 months 2 weeks ago
Joined: 03/16/2011 - 00:02
Posts: 1034
Location: US
good 3mode driver/xml led combination up to 8.4v

I was thinking about getting an empty p60 module from Dx and want to know what combination driver/xml led you guys can recommend. i was also thinking about changing the 1 mode driver from a solarforce xml dropin to 3 mode.

03/04/16 

 

8 lives left

Budgeteer
Budgeteer's picture
Offline
Last seen: 6 years 6 months ago
Joined: 08/24/2010 - 02:19
Posts: 3087
Location: Slovenia (EU)

Sorry but i never came across such a driver that accepts 8,4V.

kragmutt wrote:

They're gonna send you a green redcat with a black LED.

Nautic
Nautic's picture
Offline
Last seen: 10 months 20 hours ago
Joined: 02/14/2010 - 14:01
Posts: 992
Location: Europe

Cheap quality is good - Expensive crap isn´t

Buwuve
Buwuve's picture
Offline
Last seen: 2 years 10 months ago
Joined: 02/11/2011 - 14:49
Posts: 1975
Location: Germany

A driver, which works fine with 8,4 Volt would be great. I have a Solarforce L2 with extension (can use 2 18650) - now I need a driver, which works with 8,4V and 2,5-3A for a XML (45 minutes runtime is ok, but I need a longer runtime and without batterychange.

Light up the darkness.

Nautic
Nautic's picture
Offline
Last seen: 10 months 20 hours ago
Joined: 02/14/2010 - 14:01
Posts: 992
Location: Europe

Cheap quality is good - Expensive crap isn´t

Match
Match's picture
Offline
Last seen: 3 years 11 months ago
Joined: 11/14/2010 - 11:57
Posts: 1488
Location: South Carolina, USA

Nautic wrote:

This one wil do it but expensive

http://www.e-lectronics.net/3mode-driver-board-with-memory-2x18650-p-464.html

This is the driver I used on my 3xXP-G mini-mag rev II.  Delivers 3.2a to the array.  Spendy, but works well.