list of my drivers

16 posts / 0 new
Last post
wight
Offline
Last seen: 4 months 4 weeks ago
Joined: 11/27/2013 - 16:40
Posts: 4955
Location: Virginia, USA
list of my drivers


Name Diameter Architecture
Development Status Testing? Controller MOSFET
A22DD-L 22mm DD+7135 1-side WIP Untested n/a LFPAK56
A17-Hybrid 17mm DD+7135 2-sided Retired Light n/a LFPAK56
A17DD-L 17mm DD+7135 1-side WIP Light n/a LFPAK56
A15DD-L 15mm DD+7135 1-side WIP Untested n/a LFPAK33
A12DD-L 12mm / 13mm DD+7135 2-sided WIP Untested n/a LFPAK33
A10DD-L 10mm DD+7135 2-sided WIP Untested n/a LFPAK33
TK35_Thing 36mm / 32mm options 1-side WIP Untested n/a LFPAK56








A17DD-SO8 (etc) 17mm / 20mm / 26mm / 27mm DD 1-side Released Extensive n/a LFPAK56
A17DD-LDO 17mm DD 1-side WIP ?
LFPAK56
A10DD-33 10mm DD 2-sided WIP Untested n/a LFPAK33








A22-7135 22mm Linear (7135) 2-sided Released Light n/a
A17PZL 17mm Linear (7135) 2-sided Released Light n/a n/a
A17-L81 17mm Linear (7135) 2-sided WIP Untested n/a n/a








un-named 20mm Buck 2-sided pre-WIP Untested MAX16820 LFPAK33
un-named 17mm / 20mm Buck 2-sided Retired No good QX5241
A17LDX / A20LDX 17mm / 20mm Linear (FET)
Retired Light QX7136 LFPAK56








un-named 15mm Boost 1-side pre-WIP Untested PAM2803 n/a


Still taking a break. Smile
list of my drivers & variants (A17DD, FET+1 stuff, WIP stuff, etc)

Edited by: wight on 03/12/2016 - 11:09
wight
Offline
Last seen: 4 months 4 weeks ago
Joined: 11/27/2013 - 16:40
Posts: 4955
Location: Virginia, USA

Reserved.

Still taking a break. Smile
list of my drivers & variants (A17DD, FET+1 stuff, WIP stuff, etc)

nitro
nitro's picture
Offline
Last seen: 5 months 6 hours ago
Joined: 05/22/2011 - 13:32
Posts: 2692
Location: ohio

EDIT: Nice to see this wight to bad u did not have a build list for each driver in the OP just hate searching the forums for them Smile

wight
Offline
Last seen: 4 months 4 weeks ago
Joined: 11/27/2013 - 16:40
Posts: 4955
Location: Virginia, USA

Thanks nitro. It is a WIP, I’m trying to determine the best way to organize the data. I wouldn’t mind adding more information (including cart links among other things) but I don’t want to make some mega-table which won’t fit on anyone’s monitor…

Still taking a break. Smile
list of my drivers & variants (A17DD, FET+1 stuff, WIP stuff, etc)

nitro
nitro's picture
Offline
Last seen: 5 months 6 hours ago
Joined: 05/22/2011 - 13:32
Posts: 2692
Location: ohio

Not a problem when i first posted i thought u was going to do links to the design thread and below that post the parts list and describe the driver,but that was before u posted the info

wight
Offline
Last seen: 4 months 4 weeks ago
Joined: 11/27/2013 - 16:40
Posts: 4955
Location: Virginia, USA

I need to add things like that, I want this thread to replace most of my signature.

Still taking a break. Smile
list of my drivers & variants (A17DD, FET+1 stuff, WIP stuff, etc)

pilotdog68
pilotdog68's picture
Offline
Last seen: 2 weeks 3 days ago
Joined: 05/30/2013 - 23:31
Posts: 6323
Location: Held against my will in IOWA, USA

The design threads are linked, so maybe just add cart links to each driver’s op? A lot of them share the same components, but still a lot of work. Maybe Nitro can volunteer to build the carts for you Wink

My Favorite Modded Lights: X6R, S8 , X2R , M6, SP03

Major Projects:  Illuminated Tailcap, TripleDown/TripleStack Driver

nitro
nitro's picture
Offline
Last seen: 5 months 6 hours ago
Joined: 05/22/2011 - 13:32
Posts: 2692
Location: ohio

Once i ship out all the X6 heatsinks ill help out with it

Halo...
Halo...'s picture
Offline
Last seen: 10 months 6 days ago
Joined: 12/15/2011 - 02:39
Posts: 3304
Location: Halo island

wight wrote:
I need to add things like that, I want this thread to replace most of my signature.
BeerWink
MRsDNF
MRsDNF's picture
Offline
Last seen: 1 hour 31 min ago
Joined: 12/22/2011 - 21:18
Posts: 10925
Location: A light beam away from the missus in the land of Aus.

Your a very clever chappy. Thanks for all the work. Smile

My current and or voltage measurements are only relevent to anything that I measure.

Budget light hobby proudly sponsored by my Mastercard and unknowingly paid for by a hard working wife. 

djozz said "it came with chinese lettering that is chinese to me".

old4570 said "I'm not an expert , so don't suffer from any such technical restrictions".

Old-Lumens. Highly admired and cherished member of Budget Light Forum. 11.5.2011 - 20.12.16. RIP.

 

prisma
Offline
Last seen: 1 month 1 week ago
Joined: 12/02/2011 - 11:07
Posts: 106
Location: Germany

Thanks for your work, very helpful.

wight
Offline
Last seen: 4 months 4 weeks ago
Joined: 11/27/2013 - 16:40
Posts: 4955
Location: Virginia, USA

Added TK35 thing WIP driver. Updated table to include single-sidedness.

It’s not the best, but I think it’s ready to replace the sig links.

Still taking a break. Smile
list of my drivers & variants (A17DD, FET+1 stuff, WIP stuff, etc)

pilotdog68
pilotdog68's picture
Offline
Last seen: 2 weeks 3 days ago
Joined: 05/30/2013 - 23:31
Posts: 6323
Location: Held against my will in IOWA, USA

maybe bold the category row and title column?

and if you’re worried about width, the diameter box for A17DD-SO8 could be stacked into two rows within the box

My Favorite Modded Lights: X6R, S8 , X2R , M6, SP03

Major Projects:  Illuminated Tailcap, TripleDown/TripleStack Driver

LinusHofmann
LinusHofmann's picture
Offline
Last seen: 4 months 6 days ago
Joined: 09/28/2013 - 08:27
Posts: 974
Location: Switzerland

Very handy table. Cool to see all the options you’re working on!
Cheers

ToyKeeper
ToyKeeper's picture
Offline
Last seen: 4 hours 13 min ago
Joined: 01/12/2013 - 14:40
Posts: 5355
Location: (469219) 2016 HO3

Thanks for the index!

I’ve been pondering how to do something similar for firmware, too… had been thinking of using tags, but perhaps a table would work.

Also, the ANNDD-L series is particularly nice. Smile I hope to see these used in pretty much everything soon.

HarleyQuin
HarleyQuin's picture
Offline
Last seen: 2 months 8 hours ago
Joined: 03/29/2013 - 04:47
Posts: 487

No wonder I lost track of all your projects…

Thanks a lot for contributing so much, so well, and so thoroughly.

Your work literally drives this forum forward.

Oshpark Boards:
Boost: HQ 15mm/17mm programmable boost driver with ATtiny13A
46mm Triple-Channel: BLF SRK FET v3 . 17mm Linear: HQ10D / HQ4D / HQ4S . Contact Boards: 22/24/26mm