Oh Fasttech...

33 posts / 0 new
Last post
SIGShooter's picture
Last seen: 3 min 30 sec ago
Joined: 07/14/2013 - 02:10
Posts: 1766
Location: northern california

Antenne wrote:
But beware! A second cap can result in a decreased performance since the internal resistance rises. At least at higher currents this could be a disadvantage. I found this article with measurements of current Keeppower 26650 cells (in German) which performed better when the additional cap was removed:

Very true. I was thinking of drilling a hole in the top of the button top and running some braided wire through it. Then I would solder it down and solder the other end to the cell. Super glue, a sealing ring, and a new wrapper and the battery should be good to go.

All my lights take flat tops but I’ve been looking at headlights that only work with button tops, hence the reason why I’m considering doing this.

9mm/40cal/45cal bullets and large/small pistol primers available for sale in San Francisco Bay area

L4M4's picture
Last seen: 3 hours 42 min ago
Joined: 12/08/2013 - 13:43
Posts: 1310
Location: Germany

Surely that is a great deal Oops