LD-2 driver info thread:
Price:
14.9$/piece
Note: NTC resistors (1 per driver) are included by default.
Additional DIY parts
Moonlight parts 0.25$/set (for one driver)
2xLi-ion("6V") support parts 1.0$/set (for one driver)
3xLi-ion("9V") support parts 1.0$/set (for one driver)
4xLi-ion("12V") support parts 3.5$/set (for one driver)
Resistor for 5A,7A,8A,9A,10A or 12A mod 0.1$/piece
Equation for max. current set :
Rset=900/I;
(Rset- required resistance in kOhm,I -desired current in Amperes)
30AWG 200C silicone wire 0.5$/set (25cm RED + 25cm BLACK)
Great wire for e-switch and NTC connections,super-flexible and high temp. resistant (picture with 22AWG for size comparison)
STANNOL 0.7mm HS10 solder wire 0.3$/25cm
Probably one of the best solder wires for DIY,incredible flow, mirror-like finish!
Other
Soldering moonlight and/or 6V parts fee 1.0$/driver
Changing/soldering max. current resistor fee 0.5$/driver
_______________________________________________________________________________________
LD-M2 driver info thread:
There are two max. current versions: 6Amps - optimized for 4-12Amp range
12Amps -optimized for 12-20Amp range
Price:
19.9$/piece
Note: NTC overtemp. resistor,moonlight parts and 1S-4S multicell parts are already on board by default.
Equation for max. current set(same 0603 resistor as on LD-2) :
6Amp version: Rset=900/I;
12Amp version: Rset=450/I;
(Rset- required resistance in kOhm,I -desired current in Amperes)
Other
Changing/soldering max. current resistor fee 0.5$/driver
Shipping: Priority airmail shipping(pretty fast): +2$
Tracking number option: +5$
Estimated shipping times:
EU 3-5 days
World 5-20 days
Paypal fees-included
Paypal: led4power@hotmail(dot)com (replace (dot) with .)
Note:for Italy only tracked shipping is available
Thanks