The cell was in deep discharge state, so it's maybe damaged, but I mesured the internal resistance of the cell, and that was only 115mOhm, so it can be drive hard.
Regarding the test, first I shorted the cell with a relative thin and long wire.
At 3:00 you see, the current and the voltage is dropping quickly, I don't know, maybe the PTC limits the current, or the cell can not hold the current.
second action:
Shorted the cell with a thick and short wire, you see the current is started over 20A and decreased rapidly.
third:
again short and thick wire:
fourth action:
back to the long thin wire :
After that the cell was 60°C, but nothing serious.