Up for sale is a headlamp I have modified in various ways. The host began life as 18650 powered zoomy lights with a three mode, next mode memory driver “powering” a latticebright fake XP sized emitter. This headlamp was left as a zoomy but now features an XP-G2 S4 2B emitter regulated by a six chip nanjg driver flashed with four mode (moon, low, med, hi) STAR firmware with off time memory. The lamp draws around 2.1 amps on high. Lamp and beam profile below.
Price includeing CONUS shipping is $45 $35. International buyers pay additional shipping.
First reply of “I’ll take it” followed by PM gets the light.
It does seem to be that I was stalking him but alas no I wasn't. Handsome aye? He should have one of my lights and the good wife thinks I'm anything but handsome.
I have that exact same light. I modded it with a 3-mode 1.5 amp Nanjg 105c and a 4D tint XML2 emitter. Quick and dirty mod. Didn’t bother with adjusting the focus for the new emitter, adding thicker wire or even adding heatsink paste. I added a copper insert into the battery compartment so it can use flat top cells.
Despite the quick and dirty nature of the mod, this light is rock-solid reliable. It’s also my most used light. I use it when modding other lights or doing any kind of indoor modding or chore activities. Great light!
Star firmware does have a low voltage warning (three flashes followed by output reduction) and an eventual low voltage shut off for those that ignore the repeated warnings. And yes, the light should be outputting an estimated 400 lumens at 2.1 amps(the highest mode).
