nitro
(nitro)
June 16, 2016, 2:25am
1
Hey guys i just got in a heatsink from Dale (THANK YOU) for the X5 host ill be looking on doing one run on these so get them while u can.
The price will be
Copper $13
Aluminum $10
PS: i still have tons of heatsinks for the eagle eye X6 (PICS TO COME TOMORROW)
nitro
(nitro)
June 16, 2016, 8:34pm
2
Reserved…………………PS for the guys that bought the X6 heatsinks i can ship these with them so no extra shipping charge
nitro
(nitro)
June 17, 2016, 2:58am
3
KawiBoy1428…….3C
Ouchyfoot……………3C
Bump. I assume this will be for the T-PAD quads?
(might want to post a pic of the one you got)
will34
(will34)
June 16, 2016, 3:18pm
6
Will these fit the taller Khatod optic or just the carclo?
Ouchyfoot
(Ouchyfoot)
June 16, 2016, 3:56pm
7
Just Carlco
Khatod is 7.3mm taller than Carlco.
RobertB
(RobertB)
June 16, 2016, 3:58pm
8
Would like to see picts as well, thanks
Ouchyfoot
(Ouchyfoot)
June 16, 2016, 4:00pm
9
I’ll take two aluminum and one copper.
I’ll take (3) Copper X5 sinks Nitro, thanks for doing this! :+1:
Ouchyfoot
(Ouchyfoot)
June 17, 2016, 12:17am
12
Change mine from 2A + 1C to three copper please.
nitro
(nitro)
June 17, 2016, 2:59am
13
You got it, I thought these would still faster than this lol
will34
(will34)
June 17, 2016, 6:07am
14
Do you plan on making a shorter version to fit the khatod quad optic? (I don’t even know if the kathod fits in the X5, hope somebody could test fit)
If not, I’ll take one copper.
Some measurements would be great. Height especially. Designed for optic plus lens or just optic? I’m assuming with this design the o-ring is suppose to be moved to the front of the lens/optic (rather than between the reflector and lens). Is that correct?
P.S. I really appreciate people like you who are really just doing a favor for the forum. You sir, deserve a beer.
Ouchyfoot
(Ouchyfoot)
June 17, 2016, 9:35am
16
will34:
Do you plan on making a shorter version to fit the khatod quad optic? (I don’t even know if the kathod fits in the X5, hope somebody could test fit)
If not, I’ll take one copper.
I just finished a quad Astolux S3/BLF X5 build using the 35mm Khatod optic.
I love 14500 flashlights! Not so much the tube style, but ones that have heads over 20mm, which is why I had to grab some Astrolux S3/SC hosts
Of course I had to quad it, but which optic? The Carlco 24mm is too small and will fall through the bezel without some kind of collar. The Khatod 25mm fits, but there is still some side to side play, so I went with the 35mm Khatod and sanded it down to around 27mm.
The Khatod is 7.3mm taller than the Carlco, more than twice the hight, and the individual…
Ouchyfoot
(Ouchyfoot)
June 17, 2016, 9:39am
17
It could be that Banggood doesn’t have any hosts in stock. I ordered four over a week ago and they’re just sitting there. … “Processing”
will34
(will34)
June 17, 2016, 12:05pm
18
Sweet mod there Ouchy, that khatod fits perfectly with a little dremel work.
Now I’ll wait for nitro to make the short spacer
nitro
(nitro)
June 17, 2016, 3:53pm
19
Hey guys i measured 13.20mm HIGH with my cheap digital caliper and 21.90mm wide again thats with a cheaper digital caliper
On mine , i used 13,5mm height VS 21,6mm diameter .