Keisari, Kawiboy is pulling 22 amps through his 6V XHP-70, figure the wattage on that little oven why don’t you?
I know DB knows, but for anyone else curious, I’d estimate about 160 “ish” watts. I’m not sure what the voltage sag is, but probably less than a pair of 26650 which tend to pull 17 to 19 amps (with 6v xhp70.2).
—
Texas Ace Lumen Tube calibrated with Maukka lights
I am in the first 555 paid, registered shipping, no batteries to the UK & have not been posting in this thread just patiently waiting
Am I right in thinking that the last of the first 555 DHL shipments have now been made & that next week the first of the non USA non DHL shipments will be sent ?
I am in the first 555 paid, registered shipping, no batteries to the UK & have not been posting in this thread just patiently waiting
Am I right in thinking that the last of the first 555 DHL shipments have now been made & that next week the first of the non USA non DHL shipments will be sent ?
The whole 555 thing was about payments and prices. That is done. Now it is about the first 850 orders (#1 to #1049).
There are still USADHL shipments to be made.
We don’t know what will be shipped next week as we haven’t figured out what all was shipped this week.
—
Texas Ace Lumen Tube calibrated with Maukka lights
I am in the first 555 paid, registered shipping, no batteries to the UK & have not been posting in this thread just patiently waiting
Am I right in thinking that the last of the first 555 DHL shipments have now been made & that next week the first of the non USA non DHL shipments will be sent ?
The whole 555 thing was about payments and prices. That is done. Now it is about the first 850 orders (#1 to #1049).
There are still USADHL shipments to be made.
We don’t know what will be shipped next week as we haven’t figured out what all was shipped this week.
Thanks Jason as that was why I asked as I have found this thread a little difficult to follow where shipping is concerned.
So most of the first 555 have been shipped ?
Hopefully in the next week or 2 there will be another 2 shipments of around 150 units each which hopefully will start to include the registered shipping ones ?
I am just hoping that mine gets shipped before Chinese new year as registered will mean that it will take about 4 weeks without any hold ups so I am hoping that I might get it by the end of Feb/early March ?
I finally made some time to try mine out, and I’m quite sure this is my best thrower by far without even testing it against my other throwers. Not that I have a bunch of awesome throwers…
haha lol, the registered GT’s are even bigger! Let’s hope the motorcycle with steering wheel doesn’t brake down. I will notify them (although they got thousands of mails) that France has “peage” and they better come to The Netherlands first.
I am in the first 555 paid, registered shipping, no batteries to the UK & have not been posting in this thread just patiently waiting
Am I right in thinking that the last of the first 555 DHL shipments have now been made & that next week the first of the non USA non DHL shipments will be sent ?
The whole 555 thing was about payments and prices. That is done. Now it is about the first 850 orders (#1 to #1049).
There are still USADHL shipments to be made.
We don’t know what will be shipped next week as we haven’t figured out what all was shipped this week.
According to Neal all US orders have shipped, from a message I received around 4 AM EST January 19th.
According to Neal all US orders have shipped, from a message I received around 4 AM EST January 19th.
Keep in mind that this can mean “all the US orders are about to ship”.
Some things get lost in translation. Although generally when I hear this the shipment is confirmed a few days later, so expect it to indeed be shipped shortly if not already.
If it boils down to the entire process teaching some new techniques that improve the product over the course of this group buy, would it be possible in the end to purchase a new reflector or other parts? I don’t have an issue with my reflector, but am sort of on the OCD side and if there’s a “near perfect” one being made at the end of all this I’d sure like to procure one.
I know Lumintop will want to sit down and take a breather at the end of this, and of course I’ll be in no particular hurry, just saying that it’d be nice if some parts would be individually available.
Seems to me it would have been beneficial to stick to a pre-determined final quantity for the group buy. Be that 555 or 250 or whatever, it did seem to go on a long time and at the back end of it all the numbers of people signing in went a bit crazy. I’d like to see Lumintop make money on these so they will be happy to work with us in the future, hope this “ordeal” hasn’t soured anything.
This is something I will ask about along with the xhp70.2 mcpcb’s once the GB is closer to being complete.
I wonder how Neal chooses whom to answer, and who does not, he never answered me.
When you have hundreds of messages a day, you simply don’t have time to answer them all. Been there, done that.
You have to scan them and find the ones that you can actually do something about or provide new information to and prioritize those.
Basic status checks and the like make up a large portion of the messages both he and I are getting and there is simply nothing else we can tell you in most cases besides lights are shipping each week.
This reminds me one senior manager once told me he has to spend 4hours everyday just to read and answer emails. Besides quantity is very discouraging, it is also finding correct information part that’s time consuming and might need to confirm with third or fourth persons. Imagine you have to reply all these.
Indeed, there are days where I easily spend 4+ hours just dealing with messages and such. Back when the payments were happening it was basically an all day, every day job to keep up with everything. Good thing I happened to be off work then.
Neal gets way more messages then me, I have no idea how he keeps up as good as he does.
Keisari, Kawiboy is pulling 22 amps through his 6V XHP-70, figure the wattage on that little oven why don’t you?
Tomorrow a couple of friends from here are coming up from the coast and we’ll be doing an emitter swap in their GT’s. I have mine and one I bought for a gift so we’ll have 4 GT’s to play with. Plan on getting some photo’s.
Keep in mind only a fairly small percentage of that wattage is exiting via the beam. A good estimate is between 10-30%.
So figure that the current will drop in a hurry and an more realistic wattage is around ~110W average over the time it would take to heat something.
And you get 15-40W worth of power for heating something with the beam.
Now the body of the light would be much more effective for heating something but it would be much harder to get access to that heat.
I read all the time that Neal gets hundreds of mails and messages every day. How do you know that TA? Are we all sending him mails and messages the whole day? Not me. Does he have so much customers that he receives that much mail? I had a great running business, but I didn’t get hundreds of mails every day. I guess Neal is a busy man, but ain’t we all?
If it boils down to the entire process teaching some new techniques that improve the product over the course of this group buy, would it be possible in the end to purchase a new reflector or other parts? I don’t have an issue with my reflector, but am sort of on the OCD side and if there’s a “near perfect” one being made at the end of all this I’d sure like to procure one.
I know Lumintop will want to sit down and take a breather at the end of this, and of course I’ll be in no particular hurry, just saying that it’d be nice if some parts would be individually available.
Seems to me it would have been beneficial to stick to a pre-determined final quantity for the group buy. Be that 555 or 250 or whatever, it did seem to go on a long time and at the back end of it all the numbers of people signing in went a bit crazy. I’d like to see Lumintop make money on these so they will be happy to work with us in the future, hope this “ordeal” hasn’t soured anything.
This is something I will ask about along with the xhp70.2 mcpcb’s once the GB is closer to being complete.
I wonder if they could offer their xhp35 mcpcb as well? This makes it easier for folks to swap in a different tint or a HD version.
—
Texas Ace Lumen Tube calibrated with Maukka lights
I read all the time that Neal gets hundreds of mails and messages every day. How do you know that TA? Are we all sending him mails and messages the whole day? Not me. Does he have so much customers that he receives that much mail? I had a great running business, but I didn’t get hundreds of mails every day. I guess Neal is a busy man, but ain’t we all?
He may not get that many every single day anymore but back in December he was. He has not been around as much since his wedding. I would still easily estimate 100 messages a day for him based on how many I am getting. Still I can easily get 25-50 messages a day not even inducing this thread.
Figure each message can take 2-4 minutes to reply to depending on what the question is and that is ~2 hours a day easy just for messages. Which sounds about right. Generally have to spend all my free time in the morning on this GB and then catch up again at night if I have time.
Heck I would easily wake up to 100+ messages daily for most of December and I get a lot less then he does. He is the one that had to deal with all the payments, address, phone number, and other emails and questions + the normal direct questions from people, I just had to deal with direct questions from people.
I also ran an online business and got way less emails per sale then this, this is the nature of a GB like this, it takes WAY more time and effort then just selling something on a commercial website. Which is why a lot of companies won’t do them or need someone else to handle all these details for them to agree to do it.
Plus some decisions that were made early on caused us a lot of extra work here at the end. Things will be different for any future GB’s.
Yeah, I understand that’s been a huge effort for everyone in the team. But I am hoping now things are a bit back to normal. But it’s good to evaluate this at the end of the GB. This GT seems very popular, I guess more than expected. That means a lot of extra work and pressure.
Any info on when the registered shipping to Europe will start?
Supposedly registered mail starts shipping with the next batch. We have no idea where they will be going or in what order though. Although we are only a few weeks away from all orders shipping so not a big deal to worry about at this point.
gregor, 116 on the list
till now I did not get any info that GT was shipped to me
not very happy
EU, Slovenia
who should I contact if I want to get info when my GT will be shipped, is this even possible or do I have to silently wait, maybe it will arrive in February, maybe April, maybe….??
Good to hear. Is there a ship date?
18th, 19th, 20th?
I’ll wait for a few more reports before updating page one.
Texas Ace Lumen Tube calibrated with Maukka lights
Click this to go to signature links.
I know DB knows, but for anyone else curious, I’d estimate about 160 “ish” watts. I’m not sure what the voltage sag is, but probably less than a pair of 26650 which tend to pull 17 to 19 amps (with 6v xhp70.2).
Texas Ace Lumen Tube calibrated with Maukka lights
Click this to go to signature links.
I am in the first 555 paid, registered shipping, no batteries to the UK & have not been posting in this thread just patiently waiting
Am I right in thinking that the last of the first 555 DHL shipments have now been made & that next week the first of the non USA non DHL shipments will be sent ?
Ian
The whole 555 thing was about payments and prices. That is done. Now it is about the first 850 orders (#1 to #1049).
There are still USA DHL shipments to be made.
We don’t know what will be shipped next week as we haven’t figured out what all was shipped this week.
Texas Ace Lumen Tube calibrated with Maukka lights
Click this to go to signature links.
Yes, shipping label created on 19th, estimated ship date 20th, estimated arrival 23rd morning.
Thanks Jason as that was why I asked as I have found this thread a little difficult to follow where shipping is concerned.
So most of the first 555 have been shipped ?
Hopefully in the next week or 2 there will be another 2 shipments of around 150 units each which hopefully will start to include the registered shipping ones ?
I am just hoping that mine gets shipped before Chinese new year as registered will mean that it will take about 4 weeks without any hold ups so I am hoping that I might get it by the end of Feb/early March ?
Ian
Me too
Just got an sms from Fedex; delivery on the 23rd as well. So that makes two of us
Lights out! That's when things get interesting...
I finally made some time to try mine out, and I’m quite sure this is my best thrower by far without even testing it against my other throwers. Not that I have a bunch of awesome throwers…
The low mode should be lower.
Reviews: Efan IMR18350 700mAh 10.5A, <a href="http://
Where are you located BanglaBob?
JamesB wrote:

.
.
…….
.
…………
You never know how a horse will pull until you hook him up to a heavy load./"Bear" Bryant
.................................. "Slow is Smooth, Smooth is Fast" ...................................
Texas Lumens Flashlights / M4D M4X Deals : sign up - save $$$$
Rudeness Level _ mΩ _ {width:70%} _ LightWiki _ LED Tint Chart
Xlamp size chart _ BatteryU _ Flashaholic? Need Professional Help??? TheOriginal _ TAB _ LightSearch _ BatterySearch _ 14500's _ DiCal
Singapore.
According to Neal all US orders have shipped, from a message I received around 4 AM EST January 19th.
Keep in mind that this can mean “all the US orders are about to ship”.
Some things get lost in translation. Although generally when I hear this the shipment is confirmed a few days later, so expect it to indeed be shipped shortly if not already.
Texas Avenger Driver Series
My LED Test series - XP-L2 V5 - Nichia 219C 90+ CRI - Latticebright "XM-L" - XHP35 & PWM efficiency - XHP50 - XP-L V5 - XM-L2 U2 - XP-G3 S5 - XP-L HI V2 - Oslon Square & direct comparison to Djozz tests - Nichia 319A - Nichia 219B 9080 CRI - Nichia 219C D320 - Nichia 229AT - XHP70.2 P2 - XHP50.2 J4 - Samsung LH351D
Easy comparison tool for all my LED tests
This is something I will ask about along with the xhp70.2 mcpcb’s once the GB is closer to being complete.
Texas Avenger Driver Series
My LED Test series - XP-L2 V5 - Nichia 219C 90+ CRI - Latticebright "XM-L" - XHP35 & PWM efficiency - XHP50 - XP-L V5 - XM-L2 U2 - XP-G3 S5 - XP-L HI V2 - Oslon Square & direct comparison to Djozz tests - Nichia 319A - Nichia 219B 9080 CRI - Nichia 219C D320 - Nichia 229AT - XHP70.2 P2 - XHP50.2 J4 - Samsung LH351D
Easy comparison tool for all my LED tests
Indeed, there are days where I easily spend 4+ hours just dealing with messages and such. Back when the payments were happening it was basically an all day, every day job to keep up with everything. Good thing I happened to be off work then.
Neal gets way more messages then me, I have no idea how he keeps up as good as he does.
Texas Avenger Driver Series
My LED Test series - XP-L2 V5 - Nichia 219C 90+ CRI - Latticebright "XM-L" - XHP35 & PWM efficiency - XHP50 - XP-L V5 - XM-L2 U2 - XP-G3 S5 - XP-L HI V2 - Oslon Square & direct comparison to Djozz tests - Nichia 319A - Nichia 219B 9080 CRI - Nichia 219C D320 - Nichia 229AT - XHP70.2 P2 - XHP50.2 J4 - Samsung LH351D
Easy comparison tool for all my LED tests
Keep in mind only a fairly small percentage of that wattage is exiting via the beam. A good estimate is between 10-30%.
So figure that the current will drop in a hurry and an more realistic wattage is around ~110W average over the time it would take to heat something.
And you get 15-40W worth of power for heating something with the beam.
Now the body of the light would be much more effective for heating something but it would be much harder to get access to that heat.
Texas Avenger Driver Series
My LED Test series - XP-L2 V5 - Nichia 219C 90+ CRI - Latticebright "XM-L" - XHP35 & PWM efficiency - XHP50 - XP-L V5 - XM-L2 U2 - XP-G3 S5 - XP-L HI V2 - Oslon Square & direct comparison to Djozz tests - Nichia 319A - Nichia 219B 9080 CRI - Nichia 219C D320 - Nichia 229AT - XHP70.2 P2 - XHP50.2 J4 - Samsung LH351D
Easy comparison tool for all my LED tests
I read all the time that Neal gets hundreds of mails and messages every day. How do you know that TA? Are we all sending him mails and messages the whole day? Not me. Does he have so much customers that he receives that much mail? I had a great running business, but I didn’t get hundreds of mails every day. I guess Neal is a busy man, but ain’t we all?
I wonder if they could offer their xhp35 mcpcb as well? This makes it easier for folks to swap in a different tint or a HD version.
Texas Ace Lumen Tube calibrated with Maukka lights
Click this to go to signature links.
/\/\/\ +1
You never know how a horse will pull until you hook him up to a heavy load./"Bear" Bryant
.................................. "Slow is Smooth, Smooth is Fast" ...................................
Texas Lumens Flashlights / M4D M4X Deals : sign up - save $$$$
Rudeness Level _ mΩ _ {width:70%} _ LightWiki _ LED Tint Chart
Xlamp size chart _ BatteryU _ Flashaholic? Need Professional Help??? TheOriginal _ TAB _ LightSearch _ BatterySearch _ 14500's _ DiCal
He may not get that many every single day anymore but back in December he was. He has not been around as much since his wedding. I would still easily estimate 100 messages a day for him based on how many I am getting. Still I can easily get 25-50 messages a day not even inducing this thread.
Figure each message can take 2-4 minutes to reply to depending on what the question is and that is ~2 hours a day easy just for messages. Which sounds about right. Generally have to spend all my free time in the morning on this GB and then catch up again at night if I have time.
Heck I would easily wake up to 100+ messages daily for most of December and I get a lot less then he does. He is the one that had to deal with all the payments, address, phone number, and other emails and questions + the normal direct questions from people, I just had to deal with direct questions from people.
I also ran an online business and got way less emails per sale then this, this is the nature of a GB like this, it takes WAY more time and effort then just selling something on a commercial website. Which is why a lot of companies won’t do them or need someone else to handle all these details for them to agree to do it.
Plus some decisions that were made early on caused us a lot of extra work here at the end. Things will be different for any future GB’s.
Texas Avenger Driver Series
My LED Test series - XP-L2 V5 - Nichia 219C 90+ CRI - Latticebright "XM-L" - XHP35 & PWM efficiency - XHP50 - XP-L V5 - XM-L2 U2 - XP-G3 S5 - XP-L HI V2 - Oslon Square & direct comparison to Djozz tests - Nichia 319A - Nichia 219B 9080 CRI - Nichia 219C D320 - Nichia 229AT - XHP70.2 P2 - XHP50.2 J4 - Samsung LH351D
Easy comparison tool for all my LED tests
Yeah, I understand that’s been a huge effort for everyone in the team. But I am hoping now things are a bit back to normal. But it’s good to evaluate this at the end of the GB. This GT seems very popular, I guess more than expected. That means a lot of extra work and pressure.
Any info on when the registered shipping to Europe will start?
Supposedly registered mail starts shipping with the next batch. We have no idea where they will be going or in what order though. Although we are only a few weeks away from all orders shipping so not a big deal to worry about at this point.
Texas Avenger Driver Series
My LED Test series - XP-L2 V5 - Nichia 219C 90+ CRI - Latticebright "XM-L" - XHP35 & PWM efficiency - XHP50 - XP-L V5 - XM-L2 U2 - XP-G3 S5 - XP-L HI V2 - Oslon Square & direct comparison to Djozz tests - Nichia 319A - Nichia 219B 9080 CRI - Nichia 219C D320 - Nichia 229AT - XHP70.2 P2 - XHP50.2 J4 - Samsung LH351D
Easy comparison tool for all my LED tests
Thanks!
TA , any possibillity to make a short battery tube ?
So ony i carrier can be used . I don’t know about other people but i would take one .
- George
My Reviews : KDlight C8 / ThruNite Archer 1A V3 / Thorfire C8s / ThruNite TN12 (2016) / Utorch UT01 / Utorch UT02 / Jetbeam WL-S2 (xp-l) / ThruNite TC12 V2 / Massdrop Brass AAA / Manker LAD / Lumintop SD26 / ThruNite Mini TN30 (3x xm-l2) / Qualilite D81 / Nitecore MH20GT / Odepro TM30 / Klarus XT30R / Nitecore NU20 CRI / Ultrafire XM-L2 / Foursevens Mini MK II / Manker E02 / Manker E14 II / Teekland Flashlights / Lumintop Elfin / Thorfire S70S / ThruNite Neutron 2C / Jaxman M8 / KDLITKER C8.2 / Zanflare F1 / Nitecore Concept 1 / Emisar D4 / Astrolux MF-01 / ThruNite TC10 V3 / Amutorch JM70 (xpl hi)
It is another thing to talk to lumintop about once the GB is finished.
Texas Avenger Driver Series
My LED Test series - XP-L2 V5 - Nichia 219C 90+ CRI - Latticebright "XM-L" - XHP35 & PWM efficiency - XHP50 - XP-L V5 - XM-L2 U2 - XP-G3 S5 - XP-L HI V2 - Oslon Square & direct comparison to Djozz tests - Nichia 319A - Nichia 219B 9080 CRI - Nichia 219C D320 - Nichia 229AT - XHP70.2 P2 - XHP50.2 J4 - Samsung LH351D
Easy comparison tool for all my LED tests
Good to know .
Thanks again for all the help with xhp70.2 mcpcbs too , let’s hope they will help us
- George
My Reviews : KDlight C8 / ThruNite Archer 1A V3 / Thorfire C8s / ThruNite TN12 (2016) / Utorch UT01 / Utorch UT02 / Jetbeam WL-S2 (xp-l) / ThruNite TC12 V2 / Massdrop Brass AAA / Manker LAD / Lumintop SD26 / ThruNite Mini TN30 (3x xm-l2) / Qualilite D81 / Nitecore MH20GT / Odepro TM30 / Klarus XT30R / Nitecore NU20 CRI / Ultrafire XM-L2 / Foursevens Mini MK II / Manker E02 / Manker E14 II / Teekland Flashlights / Lumintop Elfin / Thorfire S70S / ThruNite Neutron 2C / Jaxman M8 / KDLITKER C8.2 / Zanflare F1 / Nitecore Concept 1 / Emisar D4 / Astrolux MF-01 / ThruNite TC10 V3 / Amutorch JM70 (xpl hi)
gregor, 116 on the list
till now I did not get any info that GT was shipped to me
not very happy
EU, Slovenia
who should I contact if I want to get info when my GT will be shipped, is this even possible or do I have to silently wait, maybe it will arrive in February, maybe April, maybe….??
kind regards
Pages