Manker E12 2AA 650 lumens Flashlight is releasing

20 posts / 0 new
Last post
Mankerlight
Mankerlight's picture
Offline
Last seen: 2 hours 57 min ago
Joined: 05/17/2016 - 02:56
Posts: 170
Location: china
Manker E12 2AA 650 lumens Flashlight is releasing

 

Features:

Emitter: Cree XP-L V5 CW & NW for your choices
Battery: 2 AA batteries
Working Voltage: 0.9Volt-4.2Volt
Maximum Output: 650Lumens
Maximum Beam Intensity: 2300cd
Maximum Beam Distance: 96 Meters
Most efficiency constant current driver, Maximum run time 100 hours
Clip: Stainless steel clip
Lens: Toughened ultra-clear glass lens with anti-reflective coating
Waterproof: IPX-8(2 meters under water)
Impact resistance: 2 meters

Size&Weight:
Length: 145mm
Diameter: 20mm
Weight: 51g (without battery)

Accessories:
Stainless steel bezel*1
O-ring *1
Lanyard*1
User manual*1


Output & Runtime:
Moonlight 2lumens(300 hours)
Low 56lumens(16.5 hours)
Medium 260lumens(4.5 hours)
High 650lumens(2 hours)
Strobe 650lumens

Operation:
Tactical switch on the tailcap is the on/off button.
Half press from off to momentary on(memory your last used output) and release for off.
Single click to turn on the light(memory your last used output) and single click for off.
Side switch(modes selection switch)
When the light is on, single click to cycle through the modes as in the figure.
Long press for strobe and single press to your last used mode.
Note: strobe is not included in memory function.

More details please visit:
http://www.mankerlight.com/manker-e1...ed-flashlight/

mrheosuper
Offline
Last seen: 1 day 15 hours ago
Joined: 09/30/2016 - 12:44
Posts: 126
Location: Ho Chi Minh City

i don’t think we need side switch

Forgot my pen

will34
will34's picture
Online
Last seen: 2 min 4 sec ago
Joined: 12/18/2012 - 00:12
Posts: 2950

Like the modes and UI but in your pics the clip is installed in a very awkward position, half of the flashlight would be outside the pocket. Big Smile

Does turbo mode drops after some time?

bikenber73
bikenber73's picture
Offline
Last seen: 14 hours 39 min ago
Joined: 11/12/2011 - 15:09
Posts: 1536
Location: Maryland USA

will34 wrote:
Like the modes and UI but in your pics the clip is installed in a very awkward position, half of the flashlight would be outside the pocket. Big Smile

Does turbo mode drops after some time?

They did it here to.

http://www.mankerlight.com/manker-e21-200-lumens-led-flashlight/

Trevi_lux
Trevi_lux's picture
Online
Last seen: 5 min 14 sec ago
Joined: 09/04/2012 - 10:52
Posts: 1073
Location: Galicia-Spain

The clip is a problem for me. Why this position? ……..

Nicolicous
Nicolicous's picture
Offline
Last seen: 35 min 32 sec ago
Joined: 04/16/2016 - 08:28
Posts: 463
Location: Australia

Price ?

Sorry I like get straight to the point

Lumen junkie ^.^

bikenber73
bikenber73's picture
Offline
Last seen: 14 hours 39 min ago
Joined: 11/12/2011 - 15:09
Posts: 1536
Location: Maryland USA

$35.95 USD according to the site linked

It looks like the clip can be positioned toward the head of the light.

Speed4goal
Offline
Last seen: 3 hours 7 min ago
Joined: 06/11/2016 - 13:03
Posts: 416
Location: Gulf Coast USA

This is a copy of thrunites 2a v3 archer. With 150 more claimed lumens. It also had the pocket clip like that. That stuck halfway out my pocket. It wasn’t a bad light just didn’t reach out far enough for my edc needs. Depending on price this light might make a good gift to a muggle

bikenber73
bikenber73's picture
Offline
Last seen: 14 hours 39 min ago
Joined: 11/12/2011 - 15:09
Posts: 1536
Location: Maryland USA

Yea. GB in time to get it before Christmas
?

unknown00101
Online
Last seen: 3 min 12 sec ago
Joined: 08/16/2013 - 11:53
Posts: 4170
Location: USA

Speed4goal wrote:
This is a copy of thrunites 2a v3 archer. With 150 more claimed lumens. It also had the pocket clip like that. That stuck halfway out my pocket. It wasn’t a bad light just didn’t reach out far enough for my edc needs. Depending on price this light might make a good gift to a muggle

Disgusting! Oops

But to be fair apart from the tube and tailcap they’re pretty different looking. The 2a v3 is much more sleek and less expensive. The E12 has a bunch of flat spots and edges with the E-switch further forward on the head.

jim48
Offline
Last seen: 5 hours 47 min ago
Joined: 12/09/2012 - 10:37
Posts: 47
Location: québec,canada

can it works with one AA like the two AAA version.

MAD TM26
MAD TM26's picture
Offline
Last seen: 1 hour 21 min ago
Joined: 05/09/2013 - 05:25
Posts: 248

unknown00101 wrote:
Speed4goal wrote:
This is a copy of thrunites 2a v3 archer. With 150 more claimed lumens. It also had the pocket clip like that. That stuck halfway out my pocket.

Disgusting! Oops

Haven’t I seen this from another thread before Facepalm

we buy light for a brighter tomorrow

Roderic451
Offline
Last seen: 1 week 5 days ago
Joined: 06/01/2016 - 01:36
Posts: 4

I bought one of these I’ll post some impressions when I get it.

cone
cone's picture
Offline
Last seen: 3 hours 58 min ago
Joined: 02/03/2012 - 18:58
Posts: 2320
Location: New Jersey

unknown00101 wrote:
Speed4goal wrote:
This is a copy of…

Disgusting!


Brother, that is the funniest thing I’ve read on the interwebs all week long. Bravo for the quick witted retort and the obscure reference to something only a careful reader- blessed with a good memory- of BLF would pick up on.

fidem, prae caeteris omnibus praeter honestatem

hank
hank's picture
Offline
Last seen: 48 min 25 sec ago
Joined: 09/04/2011 - 21:52
Posts: 6313
Location: California
Quote:
Bravo for the quick witted retort and the obscure reference too


+1

“Imitation is the sincerest form of flattery that mediocrity can pay to greatness.” ― Oscar Wilde

I wish we could be in contact with the behind-the-scenes people who design the originals, on which the various sellers’ names get painted.

cmflippen
cmflippen's picture
Offline
Last seen: 48 min 13 sec ago
Joined: 12/28/2015 - 20:11
Posts: 71

Why not just sell a longer battery tube for the E11? Is this not basically the same light?

Looks nice nonetheless.

bikenber73
bikenber73's picture
Offline
Last seen: 14 hours 39 min ago
Joined: 11/12/2011 - 15:09
Posts: 1536
Location: Maryland USA

I like the 14500 / 1-2-3 * AA option in lights. I have an Olight like this ..S10 maybe?

WalkIntoTheLight
Offline
Last seen: 6 days 14 hours ago
Joined: 12/05/2015 - 10:26
Posts: 623
Location: Canada

Nice to see more 2xAA lights on the market. 2xAA is my favorite general-purpose light design.

I’m not sure the side-switch is needed for this design, since it adds complexity to the UI. Also, I’m surprised there isn’t a bit more throw from 650 lumens. It must be quite floody.

But it’s nice to see a 2xAA light that has more output than 500 lumens, since I can get that in a 1xAA design nowadays.

kramer5150
kramer5150's picture
Online
Last seen: 4 min 45 sec ago
Joined: 05/19/2010 - 13:43
Posts: 1517
Location: Palo Alto CA

cmflippen wrote:
Why not just sell a longer battery tube for the E11? Is this not basically the same light?

Looks nice nonetheless.

x2… why not just make a 1AA extension tube for the E11?… and a lot of warnings not to use 2×14500.

On paper it looks like the E11 and E12 use the same driver. Is 650 Lumens roughly what the E11 output would be with 2.4-3 NiMH Volts?

hank
hank's picture
Offline
Last seen: 48 min 25 sec ago
Joined: 09/04/2011 - 21:52
Posts: 6313
Location: California

Or a 2xAA extension tube, to allow 3x NiMH cells.
I’ve made 3xAA lights by adding tubes to several SK68s and #3 zoomies — legoing parts off the “3W Police” lights.
Works out well.