[GB ended,discussion only] CRI > 80+ NICHIA 2000K-6500K [E21A/219B/219C/319A/144A/757GT-F1(Optisolis)]

1455 posts / 0 new
Last post
chouster
Offline
Last seen: 7 months 3 weeks ago
Joined: 02/20/2014 - 15:05
Posts: 683
Location: germany

prisma wrote:
@chouster

Please add 3 pcs of NVSL219CT SM273 to my order.

Thanks.

ok prisma, done

sac02
sac02's picture
Offline
Last seen: 3 months 3 weeks ago
Joined: 09/26/2016 - 15:18
Posts: 730
Location: TX

My order is through Texas_Ace:

I would like to reduce my 219B SW45K 9080 order from 10 to 8, hopefully someone on a waitlist can appreciate them.

I would like to add two 319A SM305 to my order.

I would like to add two 219C SM403 to my order, if available (I see they are low stock at the moment).

Thanks!

Wieselflinkpro
Offline
Last seen: 9 hours 2 min ago
Joined: 05/21/2015 - 04:34
Posts: 691
Location: Germany - TLF

Hello Chouster,

I take the following
5x NVSL319ATE SM505
1x NV4L144AM SM453

Thanks

chouster
Offline
Last seen: 7 months 3 weeks ago
Joined: 02/20/2014 - 15:05
Posts: 683
Location: germany

Wieselflinkpro wrote:
Hello Chouster,

I take the following
5x NVSL319ATE SM505
1x NV4L144AM SM453

Thanks


Hi, I got you added.
clemence
clemence's picture
Offline
Last seen: 5 days 11 hours ago
Joined: 07/12/2015 - 02:58
Posts: 1641
Location: Bali - Indonesia

LATEST INVENTORY STOCK [170129, 01:24 GMT +8] 

  LED Type CCT Available/STOCK*1
1 NVSL219B-V1 SW45K [4500K ANSI BBL] SOLD OUT
2 NVSL219CT SM273  [2700K 3 steps MacAdams] 147
3 NVSL219CT SM303  [3000K 3 steps MacAdams] 162
4 NVSL219CT SM353  [3500K 3 steps MacAdams]  131
5 NVSL219CT SM403  [4000K 3 steps MacAdams]  -2
6 NVSW219CT SM503  [5000K 3 steps MacAdams]  45
7 NVWL219CT SM573  [5700K 3 steps MacAdams]  164
8 NVSW319ATE  SM655  [6500K 5 steps MacAdams]  73
9 NVSL319ATE  SM305  [3000K 5 steps MacAdams]  65
10 NVSL319ATE  SM505  [5000K 5 steps MacAdams]  6
11 NV4L144AM SM453  [4500K 3 steps MacAdams]   63
12 NV4W144AM  SM503  [5000K 3 steps MacAdams]   81
13 NV4W144AM  SM573  [5700K 3 steps MacAdams]   85
14 VirEnce S3030 CDTP board   26
badhakker
badhakker's picture
Offline
Last seen: 7 months 2 days ago
Joined: 11/26/2016 - 14:47
Posts: 22
Location: Russia

sac02 wrote:
My order is through Texas_Ace:
I would like to reduce my 219B SW45K 9080 order from 10 to 8, hopefully someone on a waitlist can appreciate them.
Thanks!

I would love to accept your offer;)
sac02
sac02's picture
Offline
Last seen: 3 months 3 weeks ago
Joined: 09/26/2016 - 15:18
Posts: 730
Location: TX
badhakker wrote:
I would love to accept your offer;)

I will leave it up to the leaders who are maintaining the lists, to distribute them.

badhakker
badhakker's picture
Offline
Last seen: 7 months 2 days ago
Joined: 11/26/2016 - 14:47
Posts: 22
Location: Russia
sac02 wrote:
badhakker wrote:
I would love to accept your offer;)

I will leave it up to the leaders who are maintaining the lists, to distribute them.


Thank you
THE_dAY
Offline
Last seen: 3 days 17 hours ago
Joined: 05/18/2013 - 12:56
Posts: 458
Location: sfv, california

Yup, looks like badhakker is next in line for the 219B sw45 9080 Thumbs Up

badhakker
badhakker's picture
Offline
Last seen: 7 months 2 days ago
Joined: 11/26/2016 - 14:47
Posts: 22
Location: Russia

THE_dAY wrote:
Yup, looks like badhakker is next in line for the 219B sw45 9080 Thumbs Up

The guys Fonarevka.ru will be happy Beer
Texas_Ace
Texas_Ace's picture
Online
Last seen: 5 min 36 sec ago
Joined: 03/24/2016 - 07:44
Posts: 7365
Location: Everything is brighter in Texas

Ok, I removed 2 of Sac’s 219B’s, chouster can redistribute them to badhakker

sac02
sac02's picture
Offline
Last seen: 3 months 3 weeks ago
Joined: 09/26/2016 - 15:18
Posts: 730
Location: TX
Texas_Ace wrote:
Ok, I removed 2 of Sac’s 219B’s, chouster can redistribute them to badhakker

Please note that I also wanted to add a few more, if available.

From post 213:

sac02 wrote:


I would like to add two 319A SM305 to my order.

I would like to add two 219C SM403 to my order, if available (I see they are low stock at the moment).

Texas_Ace
Texas_Ace's picture
Online
Last seen: 5 min 36 sec ago
Joined: 03/24/2016 - 07:44
Posts: 7365
Location: Everything is brighter in Texas

sac02 wrote:

From post 213:
sac02 wrote:


I would like to add two 319A SM305 to my order.

I would like to add two 219C SM403 to my order, if available (I see they are low stock at the moment).

Odd, I could have sworn I added those. I may not have clicked save to the edit before closing the window. I will give you 2 of my 219C 4000k since those are sold out now and you should have been on the list before they sold out.

clemence
clemence's picture
Offline
Last seen: 5 days 11 hours ago
Joined: 07/12/2015 - 02:58
Posts: 1641
Location: Bali - Indonesia

LATEST INVENTORY STOCK [170129, 05:34 GMT +8] 

  LED Type CCT Available/STOCK*1
1 NVSL219B-V1 SW45K [4500K ANSI BBL] SOLD OUT
2 NVSL219CT SM273  [2700K 3 steps MacAdams] 147
3 NVSL219CT SM303  [3000K 3 steps MacAdams] 162
4 NVSL219CT SM353  [3500K 3 steps MacAdams]  131
5 NVSL219CT SM403  [4000K 3 steps MacAdams]  SOLD OUT
6 NVSW219CT SM503  [5000K 3 steps MacAdams]  45
7 NVWL219CT SM573  [5700K 3 steps MacAdams]  164
8 NVSW319ATE  SM655  [6500K 5 steps MacAdams]  73
9 NVSL319ATE  SM305  [3000K 5 steps MacAdams]  65
10 NVSL319ATE  SM505  [5000K 5 steps MacAdams]  6
11 NV4L144AM SM453  [4500K 3 steps MacAdams]   63
12 NV4W144AM  SM503  [5000K 3 steps MacAdams]   81
13 NV4W144AM  SM573  [5700K 3 steps MacAdams]   85
14 VirEnce S3030 CDTP board   26
sac02
sac02's picture
Offline
Last seen: 3 months 3 weeks ago
Joined: 09/26/2016 - 15:18
Posts: 730
Location: TX
Texas_Ace wrote:
Odd, I could have sworn I added those. I may not have clicked save to the edit before closing the window. I will give you 2 of my 219C 4000k since those are sold out now and you should have been on the list before they sold out.

I only made that request recently this morning, and I knew stock was low so I’m not upset at all if they were already claimed – even if it was a mistake. This thread is kind of chaotic and I don’t envy the list keepers trying to keep it all straight.

If you have a use for them, please keep them – those two don’t have a dedicated light to go into yet, they are just for future “what if” use. I think you will likely put them to good use before I would.

Texas_Ace
Texas_Ace's picture
Online
Last seen: 5 min 36 sec ago
Joined: 03/24/2016 - 07:44
Posts: 7365
Location: Everything is brighter in Texas

It’s ok, I tend to reserve extras for times like this. I also had no dedicated build for these. Was just getting them while I could.

Caleb
Caleb's picture
Offline
Last seen: 5 hours 49 min ago
Joined: 03/13/2016 - 01:28
Posts: 400

TA: please ad to my order, additional

2 x NVSW219CT SM503 [5000K 3 steps MacAdams]

Thank you!!

Texas_Ace
Texas_Ace's picture
Online
Last seen: 5 min 36 sec ago
Joined: 03/24/2016 - 07:44
Posts: 7365
Location: Everything is brighter in Texas

Caleb wrote:
TA: please ad to my order, additional

2 x NVSW219CT SM503 [5000K 3 steps MacAdams]

Thank you!!

Added.

Erethryn
Erethryn's picture
Offline
Last seen: 1 month 3 weeks ago
Joined: 11/08/2016 - 07:17
Posts: 153

chouster, could I please add the following to my order:

2 x NVSW219CT SM503 [5000K]

Thanks.

Caleb
Caleb's picture
Offline
Last seen: 5 hours 49 min ago
Joined: 03/13/2016 - 01:28
Posts: 400

Hey Everyone, I got some 4000k and 5000k 219Cs. I’m planning on replacing the blueish leds from a few otherwise decent ****fire lights. So I don’t cringe everytime I turn them on.

I’m wondering what you’re planning on doing with your chosen tint and why?

Texas_Ace
Texas_Ace's picture
Online
Last seen: 5 min 36 sec ago
Joined: 03/24/2016 - 07:44
Posts: 7365
Location: Everything is brighter in Texas

I put mine from the last time in basically everything. I think I used around 40 of them in all sorts of lights and love every one.

THE_dAY
Offline
Last seen: 3 days 17 hours ago
Joined: 05/18/2013 - 12:56
Posts: 458
Location: sfv, california

I’m so picky, I want to replace a Nichia in one of my lights with Nichia from this order.

Btw, am I missing something, how are the 219C 403 already sold out?
Is it not the full 600 pieces being sold, just curious.

clemence
clemence's picture
Offline
Last seen: 5 days 11 hours ago
Joined: 07/12/2015 - 02:58
Posts: 1641
Location: Bali - Indonesia

THE_dAY wrote:
I’m so picky, I want to replace a Nichia in one of my lights with Nichia from this order.

Btw, am I missing something, how are the 219C 403 already sold out?
Is it not the full 600 pieces being sold, just curious.

Hi The_day,

Just like the other day, I purchased these LEDs not only for BLF. I have other projects and customers too.
Otherwise I would not be able to order such a limited quantity. I included these together with someone else’s order.

- Clemence

clemence
clemence's picture
Offline
Last seen: 5 days 11 hours ago
Joined: 07/12/2015 - 02:58
Posts: 1641
Location: Bali - Indonesia

And I kept my words to brought 100+ pcs of NVSL219B-V1 9080 to you guys

Gunga
Gunga's picture
Offline
Last seen: 9 hours 40 min ago
Joined: 11/28/2014 - 16:56
Posts: 1620
Location: Vancouver, Canada

Yeah!

Great job!

clemence
clemence's picture
Offline
Last seen: 5 days 11 hours ago
Joined: 07/12/2015 - 02:58
Posts: 1641
Location: Bali - Indonesia

LATEST INVENTORY STOCK [170129, 23:44 GMT +8] 

  LED Type CCT Available/STOCK*1
1 NVSL219B-V1 SW45K [4500K ANSI BBL] SOLD OUT
2 NVSL219CT SM273  [2700K 3 steps MacAdams] 147
3 NVSL219CT SM303  [3000K 3 steps MacAdams] 162
4 NVSL219CT SM353  [3500K 3 steps MacAdams]  131
5 NVSL219CT SM403  [4000K 3 steps MacAdams]  SOLD OUT
6 NVSW219CT SM503  [5000K 3 steps MacAdams]  43
7 NVWL219CT SM573  [5700K 3 steps MacAdams]  164
8 NVSW319ATE  SM655  [6500K 5 steps MacAdams]  73
9 NVSL319ATE  SM305  [3000K 5 steps MacAdams]  63
10 NVSL319ATE  SM505  [5000K 5 steps MacAdams]  3
11 NV4L144AM SM453  [4500K 3 steps MacAdams]   63
12 NV4W144AM  SM503  [5000K 3 steps MacAdams]   81
13 NV4W144AM  SM573  [5700K 3 steps MacAdams]   85
14 VirEnce S3030 CDTP board   26
THE_dAY
Offline
Last seen: 3 days 17 hours ago
Joined: 05/18/2013 - 12:56
Posts: 458
Location: sfv, california

clemence wrote:

Hi The_day,

Just like the other day, I purchased these LEDs not only for BLF. I have other projects and customers too.
Otherwise I would not be able to order such a limited quantity. I included these together with someone else’s order.

- Clemence


Thanks for the clarification, I figured you might have some for other clients.

Looks like the 4000K, 4500K, 5000K are most popular here.
Since you’ve seen ‘em all, which ones from this batch are your favorites?

clemence
clemence's picture
Offline
Last seen: 5 days 11 hours ago
Joined: 07/12/2015 - 02:58
Posts: 1641
Location: Bali - Indonesia

THE_dAY wrote:
clemence wrote:

Hi The_day,

Just like the other day, I purchased these LEDs not only for BLF. I have other projects and customers too.
Otherwise I would not be able to order such a limited quantity. I included these together with someone else’s order.

- Clemence


Thanks for the clarification, I figured you might have some for other clients.

Looks like the 4000K, 4500K, 5000K are most popular here.
Since you’ve seen ‘em all, which ones from this batch are your favorites?

3000K for outdoor/garden/bed room, 4000K headlamp for outdoor hiking, 5700K for office/workshop.
After this 9050, even CRI 80 is not good enough anymore. You should try them in the kitchen! Everything looks more delicious Smile

- Clemence

Texas_Ace
Texas_Ace's picture
Online
Last seen: 5 min 36 sec ago
Joined: 03/24/2016 - 07:44
Posts: 7365
Location: Everything is brighter in Texas

These LED’s have 100% spoiled me, I was tint aware before these but I think I can officially say that after these I am a tint snob.

Colors just don’t look the same in 80 cri but I can force myself to accept them. 70cri is almost painful except for monster powered lights where your eyes hurt from all the light anyways lol.

Gunga
Gunga's picture
Offline
Last seen: 9 hours 40 min ago
Joined: 11/28/2014 - 16:56
Posts: 1620
Location: Vancouver, Canada

I realize after this I’m 90% Nichia!

Pages