Lexel
(Lexel)
March 26, 2017, 6:41pm
1
I got here 10 drivers build
5 are for sale fully equipped
SIR800 FET
2 have Attiny 25 with Bistro
2 have Attiny 85 with Narsil
one can be equipped with Attiny 25 or 85
Drivers will be fully tested before shipped
Narsil driver will be thermal calibrated as well
the 25 13$ plus 2$ shipping worldwide
the 85 14$ plus 2$ shipping worldwide
one has the FET, 7135, Diode and 10uF capacitor missing soldered with Attiny and TA Bistro
because I ran out of parts, planned at first only 17mm then added 3 21mm
MrJohnny
(MrJohnny)
March 26, 2017, 7:50pm
2
Hi I would like to have 1 Attiny 25 with Bistro.
BobbyMK
(BobbyMK)
March 26, 2017, 7:55pm
3
Driver with Narsil, can it be used with electronic switch?
k-wong
(k-wong)
March 26, 2017, 8:48pm
4
Interested in 2 attiny25 w/bistro
djozz
(djozz)
March 26, 2017, 8:57pm
5
Nice, that is a great service for exactly the skills that I am lacking. can I have one with Narsil?
vinte77
(vinte77)
March 26, 2017, 9:35pm
6
I’ll take one with bistro if you still have one available.
vwpieces
(vwpieces)
March 26, 2017, 10:53pm
7
85 with Narsil please and if there is another 25 Bistro available I do that too.
Caleb
(Caleb)
March 27, 2017, 2:38am
8
If you have any more, I would like 2 with Bistro.
Lopan
(Lopan)
March 27, 2017, 3:53am
9
From your pictures it looks like “Texas Avenger 17mm FET plus 7135* 6 +1” or have you left one of the 7135 spots blank on the backside of the other boards?
Looking at the posts above me all boards are gone already but what would be the prices in Euro?
If you have any more with narsil, I’ll take one. Thanks
Lexel
(Lexel)
March 27, 2017, 11:08am
11
Seems like the response was quite big, the drivers are all reserved till payment received.
I did replied to the PMs first and took one from replies.
Only the half assembled driver is left.
If there is enough need, I may order another batch and solder paste to assemble them faster with reflowing, its quite challanging to solder it by hand
djozz
(djozz)
March 27, 2017, 11:28am
12
Payed!
You soldered them all by hand!
Time to order some solder paste and build yourself one of those heatblocks. Or a heatgun.
k-wong
(k-wong)
March 27, 2017, 5:29pm
13
Those who looking to use narsil, what hosts do you plan to use? Any suggestions?
djozz
(djozz)
March 27, 2017, 5:42pm
14
My first thought is the Eagle Eye X2R, but I may try to find a more interesting host.
k-wong
(k-wong)
March 27, 2017, 6:07pm
15
You mean X5R? X2R is clicky. Are you able to preserve the charging capabilities with this driver?
djozz
(djozz)
March 27, 2017, 6:14pm
16
Sorry yes you are correct. I confuse the X5R with the X2R. There is a report that the charging part of the X2R is completely separated from the led driver. I hope that it is also the case with the X5R, have to dig into that, it may already been sorted out by someone.
k-wong
(k-wong)
March 27, 2017, 6:50pm
17
djozz:
Sorry yes you are correct. I confuse the X5R with the X2R. There is a report that the charging part of the X2R is completely separated from the led driver. I hope that it is also the case with the X5R, have to dig into that, it may already been sorted out by someone.
I see, it would be a helluva nice torch with TA Narsil and recharging capability…
Lexel
(Lexel)
March 27, 2017, 8:37pm
18
Its no big deal to rescue the old charging circuitry, as it stays seperate
those charging ICs are also quite easy to handle
I will order parts and solder paste for a 2. batch soon
reply here to get more drivers
If you want fully assembled and tested drivers reply here
Flashed and thermal calibrated MCUs are included.
This batch will be reflow soldered
[image]
[image]
Today 200 AMC7135 arrived and from last drivers I had 2 boards over
so i could fit the rest of parts to them, 21mm fully reflow soldered, 17mm resistors and Attiny25 hand soldered
need to use less paste especially on the FET, and add solder with iron to fets pad, as its not easy to push it down and hold still till the solder gets so…