UltraTac K18 Carbon Fibre Mini

8 posts / 0 new
Last post
CRX
CRX's picture
Offline
Last seen: 42 min 22 sec ago
Joined: 04/02/2013 - 15:27
Posts: 1743
Location: Scotland
UltraTac K18 Carbon Fibre Mini

Made a new shell for a K18 out of carbon fibre brass & magnets.
10250 cell, Nichia 219c 5000k emitter and lighted switch.

.

MILSPEC
MILSPEC's picture
Offline
Last seen: 1 hour 16 min ago
Joined: 10/12/2016 - 06:02
Posts: 447

Looks fabulous. very nice work.

jacktheclipper
jacktheclipper's picture
Offline
Last seen: 3 hours 29 min ago
Joined: 10/31/2010 - 21:18
Posts: 4754
Location: Florida , U.S.A.

His abilities always perplex

When his modding muscles he'll flex

His creations are art

And ever so smart

Wish we all could mod like CRX

djozz
djozz's picture
Offline
Last seen: 1 hour 10 min ago
Joined: 09/07/2012 - 17:04
Posts: 10046
Location: Amsterdam

Very nice and classy! Thanks for posting this.

Sledgestone
Online
Last seen: 2 min 58 sec ago
Joined: 11/07/2015 - 06:55
Posts: 274
Location: Sweden

Looks fantastic!

MRsDNF
MRsDNF's picture
Offline
Last seen: 1 hour 40 min ago
Joined: 12/22/2011 - 21:18
Posts: 10925
Location: A light beam away from the missus in the land of Aus.

Sweet. What glue do you use to adhere the carbon fiber to the brass?

My current and or voltage measurements are only relevent to anything that I measure.

Budget light hobby proudly sponsored by my Mastercard and unknowingly paid for by a hard working wife. 

djozz said "it came with chinese lettering that is chinese to me".

old4570 said "I'm not an expert , so don't suffer from any such technical restrictions".

Old-Lumens. Highly admired and cherished member of Budget Light Forum. 11.5.2011 - 20.12.16. RIP.

 

tekwyzrd
tekwyzrd's picture
Offline
Last seen: 4 hours 38 min ago
Joined: 11/14/2015 - 01:15
Posts: 843
Location: Northeastern Ohio

Who is your supplier for the cf tube?

CRX
CRX's picture
Offline
Last seen: 42 min 22 sec ago
Joined: 04/02/2013 - 15:27
Posts: 1743
Location: Scotland

Thanks guys Thumbs Up

.

MRsDNF wrote:
Sweet. What glue do you use to adhere the carbon fiber to the brass?

If I’m feeling flush and got new stuff then I use arctic alumina adhesive but this one I used the old faithful jbweld.

.

tekwyzrd wrote:
Who is your supplier for the cf tube?

You can get it cheap from China but I’ve used these two from the bay

cooloffer60.3470

and

laptopconnections