SOLD-Triple micromags for sale-SOLD

Buy / Sell Want to Sell
1

Hi All,
This will probably be my last batch of micro mags until fall. I only did two this time as I have been unusually busy playing with D cell mags. I’ve used Mountain Electronic’s or Wight’s version of the FET+1 driver in these micromags as well as XP-G3 S5 3C emitters on triple noctigon. This combination uses direct drive off a high drain 14500 cell and the low forward voltage of the XP-G3 emitters to drive the light to 8 amps on turbo at start up, dropping to around 7 amps at 30 seconds. There is around four to five minutes of run time before the light gives a low voltage warning when the battery reaches 3 volts. The battery is only providing about an amp to the emitters by time the low voltage protection kicks in.

These lights also feature the advantage of a dual channel driver to create a true firefly mode of about half a lumen (estimated in comparison to a D25A on firefly mode). Additional features include a 90 second turbo timer as a safety to prevent damage to flashlight/flesh, a four mode user interface (Moon-Low-Med-Turbo) with off time memory, a tailcap spring bypass mod to reduce resistance, and Carclo optics. My micro mags are all built as described here excepting that I use aluminum heatsinks instead of copper. I estimate around 2000 lumens at start up based on testing by Djozz. Turbo should still be giving a couple hundred lumens when the low voltage warning flashes.

The sugar shack is at 60 yards.

Price includeing CONUS shipping is $65 each. International buyers pay additional shipping.

First reply followed by PM gets the light of their choice .

My paypal address is kyfishguy@yahoo.com

Thanks for looking,

Brian

2

From the time you did the first run , I’m still making mine :smiley:

At least I’m close to finishing it , once i make a fet driver I’m ready to assemble the light :slight_smile:

3

i’ll take the green one

4

All yours, payment received, Thanks!

5

Which 14500’s do you use?

6

Windyfire high drain button top from Mountain Electronics. Efest button tops will work too but don’t seem to give up the amps like the Windyfires.

7

Hey George, it’s great to hear your making progress. I hope you let us know when it’s finished!

8

I read the micro mag build yesterday and was impressed with all that goes into these mods. The end products looks very cool. Wished I could’ve boughten one to see how they perform and look first hand. You have the process perfected kyfishguy!

9

I’ve got the green one in my pocket as we speak!!! Thanks! It’s a super creative build.