FW3A, a TLF/BLF EDC flashlight - SST-20 available, coupon codes public

13551 posts / 0 new
Last post
oweban
oweban's picture
Online
Last seen: 9 min 49 sec ago
Joined: 02/12/2019 - 06:34
Posts: 789
Location: Sydney AU

That said, there’s a lot to be gained by them having a regular on here provide them a direct weekly TLDR. This may already be happening, but it sounds like there’s pretty big lapses in communication.

Firelight2
Firelight2's picture
Offline
Last seen: 4 hours 20 min ago
Joined: 04/08/2011 - 15:17
Posts: 3693
Location: California

While I prefer the original bare metal clip, having a painted black clip or one where the ring sticks out slightly from the light is a minor issue to me.

I think it’s silly when I see people posting they won’t buy the light because of it. But to each their own.

teacher
teacher's picture
Offline
Last seen: 3 months 2 weeks ago
Joined: 02/23/2016 - 19:04
Posts: 9596
Location: NE & SW Alabama

cabfrank wrote:
I’m included too, but I’ve come this far, I can’t just stop now.
Same here, I may need *PROFESSIONAL HELP*.

You never know how a horse will pull until you hook him up to a heavy load./"Bear" Bryant 

 .................................. "Slow is Smooth, Smooth is Fast" ...................................

       Texas Lumens Flashlights / M4D M4X Deals : sign up - save $$$$  

         Rudeness Level _ mΩ _ {width:70%} _ LightWiki _ LED Tint Chart  

      Xlamp size chart _ BatteryU _ Flashaholic? Need Professional Help???            TheOriginal _ TAB _ LightSearch _ BatterySearch _ 14500's _ DiCal 

 

                                             

teacher
teacher's picture
Offline
Last seen: 3 months 2 weeks ago
Joined: 02/23/2016 - 19:04
Posts: 9596
Location: NE & SW Alabama

oweban wrote:
That said, there’s a lot to be gained by them having a regular on here provide them a direct weekly TLDR. This may already be happening, but it sounds like there’s pretty big lapses in communication.
In all seriousness oweban, this is a good idea. I don’t think we can ‘expect’ it, but it would be nice if someone from the vendor/company would post every week or two with a brief update on what is happening. And ideally it would be the same person each time.

They should not be expected to answer question or even actively participate in discussions, only to post a brief update every couple of weeks.

But, since the team members of projects usually have to beg for info…. this is unlikely I guess. Unless possibly it is somehow part of the original agreement when a ‘collaboration’ is finalized. But even then it would be unenforceable.

Firelight2 wrote:
While I prefer the original bare metal clip, having a painted black clip or one where the ring sticks out slightly from the light is a minor issue to me.

I think it’s silly when I see people posting they won’t buy the light because of it. But to each their own.

I agree. To me it is utterly comical to read those “I won’t buy because…..” posts.

Though “comical”, it is kinda sad too. Why do people feel the need to post that… just don’t buy.

But, I guess your right; “to each their own”.

You never know how a horse will pull until you hook him up to a heavy load./"Bear" Bryant 

 .................................. "Slow is Smooth, Smooth is Fast" ...................................

       Texas Lumens Flashlights / M4D M4X Deals : sign up - save $$$$  

         Rudeness Level _ mΩ _ {width:70%} _ LightWiki _ LED Tint Chart  

      Xlamp size chart _ BatteryU _ Flashaholic? Need Professional Help???            TheOriginal _ TAB _ LightSearch _ BatterySearch _ 14500's _ DiCal 

 

                                             

oweban
oweban's picture
Online
Last seen: 9 min 49 sec ago
Joined: 02/12/2019 - 06:34
Posts: 789
Location: Sydney AU

teacher wrote:
oweban wrote:
That said, there’s a lot to be gained by them having a regular on here provide them a direct weekly TLDR. This may already be happening, but it sounds like there’s pretty big lapses in communication.
In all seriousness oweban, this is a good idea. I don’t think we can ‘expect’ it, but it would be nice if someone from the vendor/company would post every week or two with a brief update on what is happening. And ideally it would be the same person each time.

They should not be expected to answer question or even actively participate in discussions, only to post a brief update every couple of weeks.

But, since the team members of projects usually have to beg for info…. this is unlikely I guess. Unless possibly it is somehow part of the original agreement when a ‘collaboration’ is finalized. But even then it would be unenforceable.

Even if it’s someone from the forums (TK, tatasal, etc) that keeps up on it and gives the TLDR and relays feedback – the rep from Lumintop doesn’t need to actually read the thread nor post, just a bit of a once-a-week catch-up. I guess there’s lots of ways it could be done, but I guess we’ll just wait for the latest photos/thoughts, as I’m not going to be drawn into guessing what’s the most up-to-date.

Ah well, I can but dream.

korpzgrinda
korpzgrinda's picture
Offline
Last seen: 9 hours 55 min ago
Joined: 01/09/2017 - 16:52
Posts: 345
Location: Eastern Woodlands in the Wilderness of North America
teacher wrote:
dropman wrote:
I would not be surprised if……. (snip, perceived silliness deleted) ………..
Seriously?? .. Facepalm .. What a silly post. Sad

sure he is exaggerating, but it’s really not silly, it goes hand in hand with this sentiment:

Shadowcactus wrote:
I can’t figure out why Lumintop would be making so many of these boneheaded changes so late in the development. The changes to the clip are honestly just terrible looking and nonsensical. I also can’t figure out why there’s so many apologists bootlicking Lumintop in the thread.

it is definitely not fit, in fact it is fat

teacher
teacher's picture
Offline
Last seen: 3 months 2 weeks ago
Joined: 02/23/2016 - 19:04
Posts: 9596
Location: NE & SW Alabama

oweban wrote:

Even if it’s someone from the forums (TK, tatasal, etc) that keeps up on it and gives the TLDR and relays feedback – the rep from Lumintop doesn’t need to actually read the thread nor post, just a bit of a once-a-week catch-up.
I agree oweban, team member updates are fine. They do a great job.

But many of them are having to fight for updates, sometimes with very little or no result for their efforts. That has to be extremely frustrating for them, as well as the time they must waste for the effort. Then only to find something out by way of a FaceBook post someone quotes here on BLF. Facepalm
That sux.

I was just thinking an update ever couple of weeks from “one” (the same) factory person would take some of the load from team members. And would probably ease the minds of many members too.

Of course any specific updates would still come from team members. But somehow they would be / should be given them in a timely manner. They should not have to fight & beg for answers or find things out from a third party. They should be kept informed.

All that I have written is probably just a pipe dream…. but in a perfect world, it would be nice. Wink

You never know how a horse will pull until you hook him up to a heavy load./"Bear" Bryant 

 .................................. "Slow is Smooth, Smooth is Fast" ...................................

       Texas Lumens Flashlights / M4D M4X Deals : sign up - save $$$$  

         Rudeness Level _ mΩ _ {width:70%} _ LightWiki _ LED Tint Chart  

      Xlamp size chart _ BatteryU _ Flashaholic? Need Professional Help???            TheOriginal _ TAB _ LightSearch _ BatterySearch _ 14500's _ DiCal 

 

                                             

ToyKeeper
ToyKeeper's picture
Offline
Last seen: 1 hour 24 min ago
Joined: 01/12/2013 - 14:40
Posts: 10006
Location: (469219) 2016 HO3
JasonWW wrote:
Are you screwed?

Six ways from Sunday! Wink

teacher
teacher's picture
Offline
Last seen: 3 months 2 weeks ago
Joined: 02/23/2016 - 19:04
Posts: 9596
Location: NE & SW Alabama

……

You never know how a horse will pull until you hook him up to a heavy load./"Bear" Bryant 

 .................................. "Slow is Smooth, Smooth is Fast" ...................................

       Texas Lumens Flashlights / M4D M4X Deals : sign up - save $$$$  

         Rudeness Level _ mΩ _ {width:70%} _ LightWiki _ LED Tint Chart  

      Xlamp size chart _ BatteryU _ Flashaholic? Need Professional Help???            TheOriginal _ TAB _ LightSearch _ BatterySearch _ 14500's _ DiCal 

 

                                             

ToyKeeper
ToyKeeper's picture
Offline
Last seen: 1 hour 24 min ago
Joined: 01/12/2013 - 14:40
Posts: 10006
Location: (469219) 2016 HO3
Bonham wrote:
Where are Luminotop’s comments … ?

It’d be really interesting to know that, no? If only we had a working line of communication with Lumintop…

That’s basically why this project wasn’t completed a year ago, and why there have been so many surprises — both welcome and not. For projects like this, BLF needs to talk directly to manufacturers… and that’s not how this project was set up.

Buzzy243 wrote:
I worry a little about the mental condition of anyone who’s followed this 8,000 post “adventure”. (Myself included.)

… and I get to read everything twice. Pbtbtbtbt. Silly

I don’t have a mental condition though. I don’t know what you’re talking about. But could someone please do something about the bats?

cabfrank wrote:
I’ve come this far, I can’t just stop now.
BurningPlayd0h
BurningPlayd0h's picture
Offline
Last seen: 6 hours 54 min ago
Joined: 06/22/2018 - 02:16
Posts: 841
Location: MN
ToyKeeper wrote:
Bonham wrote:
Where are Luminotop’s comments … ?

It’d be really interesting to know that, no? If only we had a working line of communication with Lumintop…

That’s basically why this project wasn’t completed a year ago, and why there have been so many surprises — both welcome and not. For projects like this, BLF needs to talk directly to manufacturers… and that’s not how this project was set up.

Buzzy243 wrote:
I worry a little about the mental condition of anyone who’s followed this 8,000 post “adventure”. (Myself included.)

… and I get to read everything twice. Pbtbtbtbt. Silly

I don’t have a mental condition though. I don’t know what you’re talking about. But could someone please do something about the bats?

cabfrank wrote:
I’ve come this far, I can’t just stop now.

“…but once you get locked into a serious flashlight collection, the tendency is to push it as far as you can.”

ToyKeeper
ToyKeeper's picture
Offline
Last seen: 1 hour 24 min ago
Joined: 01/12/2013 - 14:40
Posts: 10006
Location: (469219) 2016 HO3
BurningPlayd0h wrote:
ToyKeeper wrote:
cabfrank wrote:
I’ve come this far, I can’t just stop now.

“…but once you get locked into a serious flashlight collection, the tendency is to push it as far as you can.”


The thing that really worried me was the gamut. There is nothing more helpless and irresponsible and depraved than a man in the depths of a CRI binge… and I knew we’d get into that rotten stuff pretty soon.



Dougiestyle
Dougiestyle's picture
Offline
Last seen: 2 weeks 2 days ago
Joined: 01/06/2019 - 08:35
Posts: 59
Location: Knoxville, TN USA

I’m a newb, so my opinion may be off-base. With that preface, here it is anyway:

How long does R&D usually go into production of a EDC light?? I think there are enough who have expressed interest to go forward with production. I still observe opinions and speculation and considerations of development. I understand the betas of final design are in the works (I think?). Can we expect an order confirmation before, or at least near the second anniversary of the announcement of the product? Sure would be cool if it happened.

Patience is a virtue… That I do not possess.

dbellas
Offline
Last seen: 6 months 2 weeks ago
Joined: 04/19/2019 - 10:50
Posts: 1
Location: Miami FL

Yes please, I’m in for one, thank you in advance.

will34
will34's picture
Offline
Last seen: 1 hour 20 min ago
Joined: 12/18/2012 - 00:12
Posts: 3630

When lumintop or any other manufacturer that makes these BLF lights decides on last minutes changes, I’m curious about their point of view:

Do they think we won’t notice because we are dumb, or
Do they assume we won’t care because we aren’t picky, or
Do they just decide to use parts that are cheaper and readily available, saving just cents in each components which at the end sums up to a pretty significant amount, knowing that 99% of the people will still happily send their $$$ anyways.

Because it’s not like they can’t make it right, it’s almost if they didn’t want to. “Hey boss, FW3A is ready for production and the specs are fully compliant!” -“Good, now go ahead and put a different clip to it”

hodor
hodor's picture
Online
Last seen: 9 min 45 sec ago
Joined: 07/11/2018 - 03:58
Posts: 572
Location: UK

Or… All of the above? Innocent

cabfrank
Offline
Last seen: 5 hours 38 min ago
Joined: 11/19/2010 - 17:25
Posts: 2954
Location: healdsburg, california usa earth

Or, and this is giving them the huge benefit of the doubt, they think they are doing something really cool, that they are proud of, and think we will like, then are surprised when we don’t.

teacher
teacher's picture
Offline
Last seen: 3 months 2 weeks ago
Joined: 02/23/2016 - 19:04
Posts: 9596
Location: NE & SW Alabama

That is a very real & distinct possibility also cabfrank. Thumbs Up

You never know how a horse will pull until you hook him up to a heavy load./"Bear" Bryant 

 .................................. "Slow is Smooth, Smooth is Fast" ...................................

       Texas Lumens Flashlights / M4D M4X Deals : sign up - save $$$$  

         Rudeness Level _ mΩ _ {width:70%} _ LightWiki _ LED Tint Chart  

      Xlamp size chart _ BatteryU _ Flashaholic? Need Professional Help???            TheOriginal _ TAB _ LightSearch _ BatterySearch _ 14500's _ DiCal 

 

                                             

pennzy
pennzy's picture
Offline
Last seen: 17 min 24 sec ago
Joined: 12/10/2017 - 19:45
Posts: 1417
Location: United States , Pa.

We must be small potatoes.

Coscar
Coscar's picture
Offline
Last seen: 6 hours 6 min ago
Joined: 01/03/2016 - 20:16
Posts: 501
Location: Gulf Coast

We really need to start our own ‘Flashlight Factory’ with TK as president ….

Im not a Pessimist …. just an Optimist with a lot of experience

Tally-ho
Tally-ho's picture
Offline
Last seen: 6 hours 48 min ago
Joined: 07/23/2011 - 04:15
Posts: 1295
Location: France

cabfrank wrote:
Or, and this is giving them the huge benefit of the doubt, they think they are doing something really cool, that they are proud of, and think we will like, then are surprised when we don’t.

In my opinion the designer’s original idea was way “cooler” but they probably never got/understood the idea for both internal and external design, and because they never got it they are pron to screw it up (proto4’s driver) and change it (with each new sample).
They got rid of the original raw material or clear anodization. They got rid of the machining marks. They added a long bevel to the battery tube on the head side “à la” nitecore concept 1. They added a bevel on the battery tube on the tail side (why did they not put the same bevel with moderate angle on both side ?). They changed the pocket clip (first good change IMO) and reverted it to the original one, they changed its color. They added a logo on the switch.

They have no idea what they are doing, changing their mind all the time for new things delaying the production while it would have been much straight forward to stick to the original design that they never understood. Externally, this flashlight no longer looks different than any other flashlights contrary to the initial goal. Externally, it’s no longer Fritz’s Works so why keeping its name : FW3A ?

I would wish they will revert to the original external design for a copper or brass or whatever material generally without anodization, but that will never happen. They didn’t get it.
It’s hopeless to see that they can’t make something different when left on their own despite the hard work done by those involved to make it a turnkey project.
Which is great for my wallet.

teacher
teacher's picture
Offline
Last seen: 3 months 2 weeks ago
Joined: 02/23/2016 - 19:04
Posts: 9596
Location: NE & SW Alabama

pennzy wrote:
We must be small potatoes.
Most likely in the big scheme of things (think Global)…. very small potatoes indeed.

And on top of that, very small potatoes that want certain things the general public has no idea about. And the majority of those people most likely would not want those things even if they did know.

You never know how a horse will pull until you hook him up to a heavy load./"Bear" Bryant 

 .................................. "Slow is Smooth, Smooth is Fast" ...................................

       Texas Lumens Flashlights / M4D M4X Deals : sign up - save $$$$  

         Rudeness Level _ mΩ _ {width:70%} _ LightWiki _ LED Tint Chart  

      Xlamp size chart _ BatteryU _ Flashaholic? Need Professional Help???            TheOriginal _ TAB _ LightSearch _ BatterySearch _ 14500's _ DiCal 

 

                                             

Buzzy243
Buzzy243's picture
Offline
Last seen: 10 hours 31 min ago
Joined: 04/13/2017 - 08:43
Posts: 45
Location: USA

Careful there Tally-ho. The last person who commented about these issues got a stern finger wagging from the mods and then disappeared.

chinooker
chinooker's picture
Offline
Last seen: 6 hours 27 min ago
Joined: 12/16/2015 - 13:27
Posts: 1737
Location: mid USA left coast

ToyKeeper
ToyKeeper's picture
Offline
Last seen: 1 hour 24 min ago
Joined: 01/12/2013 - 14:40
Posts: 10006
Location: (469219) 2016 HO3
Tally-ho wrote:
They added a long bevel to the battery tube on the head side “à la” nitecore concept 1. They added a bevel on the battery tube on the tail side (why did they not put the same bevel with moderate angle on both side ?).

Those were changed by Fritz, not Lumintop. He made sure to clarify this, and his post has been repeated a few times whenever the topic comes up. The last time was only ten days ago. I’m not sure why people keep posting the same false claims almost a year after Fritz tried to put an end to it, but it gets old.

Tally-ho wrote:
They have no idea what they are doing…

The problem is more that we on BLF have no idea what they’re doing at Lumintop. Communication hasn’t been very good. It’s a bit like trying to chat with someone online through a router which drops a lot of packets and uses lossy compression algorithms on the rest.

To put it visually, someone sends a message like this…

… and this is what eventually gets received some time later:

So it can be a bit difficult to nail down details or sometimes even broad strokes of what was in the original message.

An old joke comes to mind…

Quote:

In the beginning was the PLAN
And then came THE ASSUMPTIONS
And the assumptions were without form
And the plan was completely without substance;
And darkness was upon the faces of the employees
And they spoke amongst themselves, saying,
“IT IS A CROCK OF [bleep] AND IT STINKS!”

And the employees went unto their supervisors saying, “It is a pail of dung and none may abide the odor thereof.”
And the supervisors went unto their managers saying, “It is a container of excrement and it is very strong such that none may abide by it.”
And the managers went unto their directors saying, “It is a vessel of fertilizer and none may abide its strength.”
And the directors went unto their executive directors saying, “It contains that which aids plant growth and is very strong.”
And the exective directors went unto the general manager saying, “It promotes growth and is very powerful.”
And the general manager went unto the Board of Directors saying, “This new plan will actively promote growth and efficiency of this organization and these areas in particular.”
And the Board of Directors looked upon the plan and saw that it was good and the plan became policy.

raccoon city
raccoon city's picture
Online
Last seen: 13 min 33 sec ago
Joined: 10/06/2010 - 02:35
Posts: 13348
Location: रॅकून सिटी Palm Desert CA USA

Good joke!  :D

Tally-ho
Tally-ho's picture
Offline
Last seen: 6 hours 48 min ago
Joined: 07/23/2011 - 04:15
Posts: 1295
Location: France

ToyKeeper wrote:
Those were changed by Fritz, not Lumintop.

He also said that the new design (long bevel) was growing on him so he probably wasn’t at the origin of it and probably not so found of it at first.
It sounds more a lumintop’s change, later accepted by Fritz who changed the angle on the tail side for a less akward combination of angles, probably.
What about the raw material with machining marks to make it looks like more a custom flashlight fresh out of the lathe which was the main idea, did he gave up on this too ?
Anyway, I already said what to do with my 4 units.

Buzzy243 wrote:
Careful there Tally-ho. The last person who commented about these issues got a stern finger wagging from the mods and then disappeared.

I’m not a pilar of BLF so I will not miss to anyone + I got 2 accounts permanently banned from CPF for less than that, I get used to stern finger wagging then i’m fine with whatever decision from the mods.
I will have more time to complete some mods I’m planning since long. Wink
JasonWW
JasonWW's picture
Online
Last seen: 2 min 1 sec ago
Joined: 10/22/2016 - 11:41
Posts: 11827
Location: Houston Texas

There’s only one mod, the forum owner and he doesn’t step in unless rules are broken and we don’t have many rules.

Texas Ace Lumen Tube calibrated with Maukka lights

Click this to go to signature links.

raccoon city
raccoon city's picture
Online
Last seen: 13 min 33 sec ago
Joined: 10/06/2010 - 02:35
Posts: 13348
Location: रॅकून सिटी Palm Desert CA USA

In general, you have to go out of your way to be permabanned, and Mr. Admin usually will give you a warning if you're out of line.

toddcshoe
toddcshoe's picture
Offline
Last seen: 4 hours 52 min ago
Joined: 01/24/2018 - 23:49
Posts: 1995
Location: Foley, MO
teacher wrote:
I think it’s silly when I see people posting they won’t buy the light because of it. To me it is utterly comical to read those “I won’t buy because…..” posts.

That is usually the case when said poster thinks other people will follow his “Jerry Maquire” moment.

"Everywhere I go, there I am"

Pages