The FW3A a TLF BLF special elegant triple powerfull flashlight

1725 posts / 0 new
Last post
DB Custom
DB Custom's picture
Offline
Last seen: 32 min 24 sec ago
Joined: 01/13/2013 - 22:28
Posts: 16057
Location: Heart of Texas

It’s just such an innate beauty, so simple and yet so well done…

Dale

IH8MYX
Offline
Last seen: 2 days 16 hours ago
Joined: 08/27/2014 - 00:57
Posts: 63
Location: Hawaii

Could you please add me to the list for 2? Thanks

joechina
Offline
Last seen: 16 hours 11 min ago
Joined: 03/05/2016 - 08:23
Posts: 563

Dale as I understand it comes in clear like fresh from the lathe.
These parts are blasted.

( I think I am more on the blasted part)

DB Custom
DB Custom's picture
Offline
Last seen: 32 min 24 sec ago
Joined: 01/13/2013 - 22:28
Posts: 16057
Location: Heart of Texas

From appearance, the inner tube is raw. Anodizing is an acid bath under electrolysis, it eats into the surface of the aluminum. As such, a mirror finished part becomes dull, or at least no longer mirror finished. So the shiny inner tube I was assuming to be raw aluminum. At any rate, it LOOKS raw and lovely. Smile

Dale

The Miller
The Miller's picture
Offline
Last seen: 21 hours 51 min ago
Joined: 12/14/2015 - 12:08
Posts: 9947
Location: Charente France

Yep will update list later.

It was kind of hard to explain the clear ano thing.
We had seen Neal’s pics of the GT proto with his clear Convoy C8 (so nice Neal is a flashoholic Big Smile ) so we said like that.

Kurt_Norway
Kurt_Norway's picture
Offline
Last seen: 56 min 4 sec ago
Joined: 02/10/2014 - 05:33
Posts: 124
Location: Drammen - Norway

Please put me down on the list for 2 Smile

Tooreal
Tooreal's picture
Offline
Last seen: 3 weeks 3 hours ago
Joined: 01/13/2016 - 14:47
Posts: 42
Location: Southeastern U.S.

Please put me down for 1 of these Awesome Designed Lights too. Smile

Interested in repairing my JetBeam TC-R1, (I’m lacking knowledge and a Novice) Wires broken between LED and Double Stacked Boards below. I soldered New wire to LED (Brass LED Base is loose, not glued or secured). 1 wire is Broken just above the top of the

The Miller
The Miller's picture
Offline
Last seen: 21 hours 51 min ago
Joined: 12/14/2015 - 12:08
Posts: 9947
Location: Charente France

Yes will do.

edeekeos
edeekeos's picture
Offline
Last seen: 4 weeks 6 min ago
Joined: 08/08/2013 - 05:27
Posts: 302
Location: Indiana

put me down for 1! Thanks!

treoneo
Offline
Last seen: 3 weeks 5 days ago
Joined: 08/07/2017 - 04:58
Posts: 47
Location: Hollywood

I only see one for me. I posted a few weeks back to add one more of two total.

The Miller
The Miller's picture
Offline
Last seen: 21 hours 51 min ago
Joined: 12/14/2015 - 12:08
Posts: 9947
Location: Charente France

Ah, sorry, will update list later and if I DL not see you after the last MARK post add you when getting to this one.

joechina
Offline
Last seen: 16 hours 11 min ago
Joined: 03/05/2016 - 08:23
Posts: 563

The Miller wrote:
Yep will update list later.

It was kind of hard to explain the clear ano thing.
We had seen Neal’s pics of the GT proto with his clear Convoy C8 (so nice Neal is a flashoholic Big Smile ) so we said like that.

Have you a link to the photo?

Umpi2000
Offline
Last seen: 2 hours 29 min ago
Joined: 03/15/2017 - 08:06
Posts: 9
Location: Durban, South Africa

I think I better get in for one of these, I haven’t read the entire thread but have units been shipped out yet?

shirnask
Offline
Last seen: 34 min 9 sec ago
Joined: 03/21/2016 - 23:58
Posts: 45
Location: Louisiana

Please add me to the list for one more (total of 3)

Thanks

JasonWW
JasonWW's picture
Offline
Last seen: 51 min 32 sec ago
Joined: 10/22/2016 - 11:41
Posts: 2700
Location: Houston Texas

Umpi2000 wrote:
I haven’t read the entire thread but have units been shipped out yet?

This is definitely a 2018 light.

My Convoy L6 thread with XHP70.2, Texas Avenger FET driver, Narsil v1.2 ramping firmware, lighted side switch and cut down SMO reflector. Lots of amp draws on stock driver as well.
http://budgetlightforum.com/node/54477

My Supfire L5-S thread with XHP70, Texas Avenger FET driver, NarsilM v1.0 ramping firmware and lighted side switch. My mini L6! http://budgetlightforum.com/node/55746

6 NarsilM user videos
http://bit.ly/narsil-vid1

Umpi2000
Offline
Last seen: 2 hours 29 min ago
Joined: 03/15/2017 - 08:06
Posts: 9
Location: Durban, South Africa

Okay cool, still $30?

The Miller
The Miller's picture
Offline
Last seen: 21 hours 51 min ago
Joined: 12/14/2015 - 12:08
Posts: 9947
Location: Charente France

joechina wrote:
The Miller wrote:
Yep will update list later.

It was kind of hard to explain the clear ano thing.
We had seen Neal’s pics of the GT proto with his clear Convoy C8 (so nice Neal is a flashoholic Big Smile ) so we said like that.

Have you a link to the photo?


Hmm idk if it got posted if you talk about the GT and clear C8, should be in the GT thread.

Yeah this one is not extremely far, though aluminum parts of proto 1 us ready, LT has yet to build a driver for that.

JasonWW
JasonWW's picture
Offline
Last seen: 51 min 32 sec ago
Joined: 10/22/2016 - 11:41
Posts: 2700
Location: Houston Texas

Umpi2000 wrote:
Okay cool, still $30?

Yeah.

My Convoy L6 thread with XHP70.2, Texas Avenger FET driver, Narsil v1.2 ramping firmware, lighted side switch and cut down SMO reflector. Lots of amp draws on stock driver as well.
http://budgetlightforum.com/node/54477

My Supfire L5-S thread with XHP70, Texas Avenger FET driver, NarsilM v1.0 ramping firmware and lighted side switch. My mini L6! http://budgetlightforum.com/node/55746

6 NarsilM user videos
http://bit.ly/narsil-vid1

erikbuch
Offline
Last seen: 9 hours 29 min ago
Joined: 08/23/2017 - 14:57
Posts: 10
Location: Norway

Please put me on the list for one!

I have seen the light cool

Peho
Offline
Last seen: 5 days 5 hours ago
Joined: 02/07/2016 - 01:29
Posts: 21
Location: Slovakia

Please, put me in for one

Fenix E35UE 2015, Crelant V6CS, Crelant V1A, KD C8, KD Buckle V6, Convoy S2+ Triple Nichia 219a, Astrolux A01, Olight I3 EOS and others

Jondallas311
Offline
Last seen: 7 hours 52 min ago
Joined: 10/16/2017 - 16:58
Posts: 1
Location: United States

If possible, I’d like to be added to the list for 1 as well.

Got a D4 as my first “real” light last week. I’m new, but the addiction is real!!!

The Miller
The Miller's picture
Offline
Last seen: 21 hours 51 min ago
Joined: 12/14/2015 - 12:08
Posts: 9947
Location: Charente France

Welcome to BLF!
Read up on li ion safety (link in my SIG)

Will update the list later!

yuhsin91123
Offline
Last seen: 51 min 54 sec ago
Joined: 09/29/2017 - 13:18
Posts: 165
Location: NJ and NY LI,

Got a MT03 and now I have Q8 and MF-01 219C on the way…
“Oh hey a $30 flashlight with almost 3000 lumens!”

Put me down for one Cool

xxx
xxx's picture
Offline
Last seen: 4 hours 50 min ago
Joined: 03/17/2013 - 08:20
Posts: 257

And the magic word must say

Add me to the list please….

The Miller
The Miller's picture
Offline
Last seen: 21 hours 51 min ago
Joined: 12/14/2015 - 12:08
Posts: 9947
Location: Charente France

Yeah will update list later
Waiting for a page break (makes it easy to find the last MARK post Wink )

Insane Dawe
Insane Dawe's picture
Offline
Last seen: 1 month 5 days ago
Joined: 04/30/2015 - 00:25
Posts: 29
Location: Chicago

I’m in.

Umpi2000
Offline
Last seen: 2 hours 29 min ago
Joined: 03/15/2017 - 08:06
Posts: 9
Location: Durban, South Africa

Forgot to actually ask to be put on the list please, so please put me in for one

The Miller
The Miller's picture
Offline
Last seen: 21 hours 51 min ago
Joined: 12/14/2015 - 12:08
Posts: 9947
Location: Charente France

Ha with all these new entries that page break is gonna happen fast Big Smile

cheesecheeks
Offline
Last seen: 4 days 6 hours ago
Joined: 12/14/2016 - 13:02
Posts: 23

Well can I go ahead and get a fourth plz? Lol

alejandrov
Offline
Last seen: 1 week 2 days ago
Joined: 01/24/2016 - 15:46
Posts: 70
Location: Spain

Please, put me in for one

Pages