The FW3A a TLF BLF special elegant triple powerful flashlight

2981 posts / 0 new
Last post
fuzun
Offline
Last seen: 1 day 11 hours ago
Joined: 02/11/2017 - 13:37
Posts: 175

Have payment method been determined yet? Will be Paypal / Western Union only again?

d_t_a
Offline
Last seen: 2 hours 20 min ago
Joined: 08/04/2017 - 23:58
Posts: 487
Location: Manila, Philippines

I’m just curious, not sure if this has been answered.

The FW3A main selling point seems to be the driver firmware (Anduril?).

But I was wondering if there’s an approximate CRI value for the 3x XP-G3s?

JasonWW
JasonWW's picture
Online
Last seen: 2 min 23 sec ago
Joined: 10/22/2016 - 11:41
Posts: 5222
Location: Houston Texas

d_t_a wrote:
I’m just curious, not sure if this has been answered.

The FW3A main selling point seems to be the driver firmware (Anduril?).

But I was wondering if there’s an approximate CRI value for the 3x XP-G3s?


I don’t think they have decided on what exact led to use yet.

My Convoy L6 thread with XHP70.2, Texas Avenger FET driver, Narsil v1.2 ramping firmware, lighted side switch and cut down SMO reflector. Lots of amp draws on stock driver as well.
http://budgetlightforum.com/node/54477

My Supfire L5-S thread with XHP70, Texas Avenger FET driver, NarsilM v1.0 ramping firmware and lighted side switch. My mini L6! http://budgetlightforum.com/node/55746

9 NarsilM user videos including GT
http://bit.ly/narsil-vid1

ToyKeeper
ToyKeeper's picture
Offline
Last seen: 42 min 14 sec ago
Joined: 01/12/2013 - 14:40
Posts: 6910
Location: (469219) 2016 HO3

The payment methods aren’t yet determined.

The LED details aren’t yet determined.

There are no plans to make an 18350 version.

The main selling points, off the top of my head:

  • Tail e-switch.
  • Unusually small for an 18650 light — about the size of a SK-68 (1xAA).
  • Bare-looking lathe-like finish, hopefully.
  • Wide range from ~0.3 lm to ~3000 lm.
  • Fancy yet easy UI.
  • Regulated output up to ~1000 lm.
  • Nice clip firmly attached.
  • Good ergonomics.

It’s not just one thing… it’s meant to be a good all-around EDC light, something to be used heavily.

And I think if it sells well, they might make it from titanium, brass, or copper in the future. I’m looking forward to those.

bobkido
Offline
Last seen: 1 week 17 hours ago
Joined: 10/24/2017 - 07:13
Posts: 5
Location: New England

Admins-
I’m 947 on request/interest list for one unit. If I still have time, please add another for a total of two units.
Thanks

Just a simple man.

Robowski
Offline
Last seen: 4 days 16 hours ago
Joined: 03/30/2018 - 04:56
Posts: 8
Location: Australia

You people are amazing!
Could I please put my name down for one if it’s not too late?

Seeker1
Offline
Last seen: 4 hours 35 min ago
Joined: 10/18/2017 - 18:36
Posts: 20
Location: United States

Please add me for 1 more. 2 total. I am 494 on list already.

This is going to be a great light with this firmware and a tail clicky!

bansuri
Online
Last seen: 12 min 10 sec ago
Joined: 01/30/2017 - 23:43
Posts: 138
Location: Columbia, IL

Seeker1 wrote:
Please add me for 1 more. 2 total. I am 494 on list already.

This is going to be a great light with this firmware and a tail clicky!


Just an FYI: I don’t think it’s going to be a tail clicky in the traditional sense, but a tail mounted contact that operates it. Similar to Liteflux, Novatac, or HDS.
Sorry if I’m stating something you already knew, there have been a lot of updated threads about lighted tailswitches lately and I wouldn’t want you to get your hopes up for this being a candidate.
Or, and this is certainly a possibility, I’m completely wrong.
ToyKeeper
ToyKeeper's picture
Offline
Last seen: 42 min 14 sec ago
Joined: 01/12/2013 - 14:40
Posts: 6910
Location: (469219) 2016 HO3

Bansuri is correct.

It’s an electronic contact switch, not a hard power-disconnect switch. It isn’t compatible with any current lighted-tailswitch solutions, but if you replaced both the custom switch PCB and the metal boot it might still be possible.

FlashIight
FlashIight's picture
Offline
Last seen: 6 hours 44 min ago
Joined: 11/24/2011 - 20:36
Posts: 144
Location: Ontario, Canada

I’m on the list for one. Please add me for one more (2 total!)

Thank you!

Sonullo
Offline
Last seen: 7 hours 27 min ago
Joined: 04/05/2018 - 06:45
Posts: 2
Location: Netherlands

Please add me to the list for one. Thanks

Seeker1
Offline
Last seen: 4 hours 35 min ago
Joined: 10/18/2017 - 18:36
Posts: 20
Location: United States

Yeah should not have said clicky. Just a tail switch that is a lot easier to find than a side switch. That ramps and does all the other fantastic modes like candle and lightning.

Want this on all my Emisars and Q8.

ToyKeeper
ToyKeeper's picture
Offline
Last seen: 42 min 14 sec ago
Joined: 01/12/2013 - 14:40
Posts: 6910
Location: (469219) 2016 HO3
Seeker1 wrote:
Want this on all my Emisars and Q8.

If you can reflash them, the code is already available.

Seeker1
Offline
Last seen: 4 hours 35 min ago
Joined: 10/18/2017 - 18:36
Posts: 20
Location: United States

TK, I have been following a lot of your updates. I could maybe learn how and purchase needed items but at this time would rather pay someone to re-flash for me.

Also you keep making it better and better so. . . Just kinda waiting for awhile.

Thanks for what you and everyone else are doing making these great UI’s!

CM2010
Offline
Last seen: 8 hours 14 min ago
Joined: 07/19/2012 - 05:48
Posts: 330
Location: England

Please add me to the list for 1.

raccoon city
raccoon city's picture
Online
Last seen: 9 min 10 sec ago
Joined: 10/06/2010 - 02:35
Posts: 10370
Location: रॅकून सिटी Palm Desert CA USA

Please put me down for another FW3A.

Thanks!

TUNE4IT
Offline
Last seen: 12 hours 53 min ago
Joined: 01/26/2018 - 08:20
Posts: 4
Location: Netherlands

Please add me for 1 unit

ToyKeeper
ToyKeeper's picture
Offline
Last seen: 42 min 14 sec ago
Joined: 01/12/2013 - 14:40
Posts: 6910
Location: (469219) 2016 HO3

I’ve been gradually catching up on requests, including those already on the list… because I’m training a bot to recognize them. I’m not sure if it’ll ever be truly viable, but for now at least it’s an interesting experiment in computer learning algorithms and web automation. And maybe someday it can track these things automatically.

bmengineer
bmengineer's picture
Offline
Last seen: 3 hours 13 min ago
Joined: 01/26/2018 - 11:38
Posts: 92
Location: Ontario, Canada
ToyKeeper wrote:
I’ve been gradually catching up on requests, including those already on the list… because I’m training a bot to recognize them. I’m not sure if it’ll ever be truly viable, but for now at least it’s an interesting experiment in computer learning algorithms and web automation. And maybe someday it can track these things automatically.

I like the idea a lot. Not too be a party pooper, but it would be even better if there was some sort of separate form that worked as an interest list so the product threads could focus on product questions and updates. I want to know what the latest news on these projects is, but I have getting the notification that just to see someone asking to be added to the list.

vinte77
Offline
Last seen: 2 hours 56 min ago
Joined: 03/04/2014 - 18:43
Posts: 429
Location: California

I’m pretty sure this has been asked already but will the light be available before Christmas this year?

ToyKeeper
ToyKeeper's picture
Offline
Last seen: 42 min 14 sec ago
Joined: 01/12/2013 - 14:40
Posts: 6910
Location: (469219) 2016 HO3
bmengineer wrote:
Not too be a party pooper, but it would be even better if there was some sort of separate form that worked as an interest list …

That’s part of the plan too, a BLF projects web site to handle signups directly, but there are some details about user authentication which aren’t going to be resolve-able any time soon. I’d need sb to add an Oauth provider module or something similar to BLF in order to let another site handle the same set of users. So for now it would have to be done through an interest-list thread… which could be separate from the discussion thread.

I’m not really sure how useful it would be, but at least it’d be a good excuse to play with some modern web tech. OTOH, I already have too many projects…

ToyKeeper
ToyKeeper's picture
Offline
Last seen: 42 min 14 sec ago
Joined: 01/12/2013 - 14:40
Posts: 6910
Location: (469219) 2016 HO3
vinte77 wrote:
I’m pretty sure this has been asked already but will the light be available before Christmas this year?

I was expecting it to be available by now. I wasn’t really expecting four months of crickets after the first prototype though. So it’s already late, and I’m hoping it’ll be out well before the holidays. Maybe if things go well, the second prototypes will go out soon, and have no significant issues, and then it could clear the way for sales to start? I really don’t know.

FW3A Team
FW3A Team's picture
Offline
Last seen: 1 day 9 hours ago
Joined: 02/15/2018 - 03:28
Posts: 11
Location: between Fritz' toes

First post updated a bit… mostly cleaning and putting current info there.


- TK

chadvone
chadvone's picture
Offline
Last seen: 3 hours 49 min ago
Joined: 08/28/2015 - 23:48
Posts: 722
Location: Iowa

I like it. Has a Novatac look to it.

slmjim
Offline
Last seen: 4 hours 41 min ago
Joined: 02/04/2018 - 17:49
Posts: 70
Location: Derby City - Home of The Louisville Slugger

Interested.

Add me to the list for one, please!

Great... Carnac the Magnificent tells me I just signed up for yet another expensive hobby.

joechina
Offline
Last seen: 8 hours 20 min ago
Joined: 03/05/2016 - 08:23
Posts: 790

FW3A Team wrote:
First post updated a bit… mostly cleaning and putting current info there.

- TK

Thanks!
The link to TLF is the order thread.
Can you add the discussion thread too, please?
http://www.taschenlampen-forum.de/threads/fw3a-tlf-sonderedition-in-klei...

CJ Avlis
Offline
Last seen: 4 hours 45 min ago
Joined: 07/21/2017 - 20:30
Posts: 185
Location: USA

I’m #542 on the list…can you please put me down for a second one.

Thanks

cypherz
Offline
Last seen: 3 hours 46 min ago
Joined: 03/19/2016 - 15:36
Posts: 49
Location: The Gateway to the Southern Northern Plains

Please put me on the list for two please!

bansuri
Online
Last seen: 12 min 10 sec ago
Joined: 01/30/2017 - 23:43
Posts: 138
Location: Columbia, IL

Is the clip in the pictures off-the-shelf? I’ve got a couple lights that it might fit.

trevize
Offline
Last seen: 3 days 11 hours ago
Joined: 05/06/2012 - 04:55
Posts: 7
Location: Spain

If it’s possible, please add me for 1 unit.

Pages