Group Buy #36: Utorch UT03 3x CREE XHP70 9,000lm+ Flashlight - 180+ units

538 posts / 0 new
Last post
Fatlight
Fatlight's picture
Offline
Last seen: 2 weeks 3 days ago
Joined: 08/15/2016 - 03:40
Posts: 82
Location: Earth

Interested depending on price. Thumbs Up

If U R reading this, U R also a Flashaholic. Pfft <3

Modulor
Offline
Last seen: 5 hours 18 min ago
Joined: 12/28/2014 - 12:11
Posts: 26
Location: Barcelona

I prefer the first design, its more elegant… more fat boy style, isn’t it??? I would like to see an hybrid version..

Is it posible include a Tripod screw with ring attachment + lanyard?

scdaf
Offline
Last seen: 7 hours 29 min ago
Joined: 11/01/2011 - 18:52
Posts: 269
Location: United States

Curious, please pm.

JasonWW
JasonWW's picture
Offline
Last seen: 2 hours 50 min ago
Joined: 10/22/2016 - 11:41
Posts: 1317
Location: Houston Texas

scdaf wrote:
Curious, please pm.

There’s nothing to PM about. All the info is in the thread. You should be put on the list.

Maybe in a month or two, or whenever production starts, then you will get a PM about how to buy.

This is so early I wouldn’t call it a group buy list, I would call it an interest list.

My Convoy L6 thread with XHP70.2, Texas Avenger FET driver, Narsil ramping firmware, lighted side switch and cut down SMO reflector. Lots of amp draws on stock driver as well.
http://budgetlightforum.com/node/54477

My Supfire L5-6 thread with XHP70, Texas Avenger FET driver, Narsil ramping firmware and lighted side switch. My mini L6!
http://budgetlightforum.com/node/55746

Jerommel
Jerommel's picture
Offline
Last seen: 9 hours 27 min ago
Joined: 01/04/2014 - 13:18
Posts: 3777
Location: the Hague, Netherlands

Aawww… The ruined the initial clean looks with fins that probably have little effect anyway….

Looking for:

5” parabolic reflector (for recoil light)

ilovejesuschrist
ilovejesuschrist's picture
Offline
Last seen: 4 hours 35 min ago
Joined: 07/24/2014 - 04:18
Posts: 190
Location: England

Interested Thanks

a12luke
Offline
Last seen: 1 week 15 hours ago
Joined: 02/01/2017 - 18:12
Posts: 6
Location: United States

Interested depending on price.

JasonWW
JasonWW's picture
Offline
Last seen: 2 hours 50 min ago
Joined: 10/22/2016 - 11:41
Posts: 1317
Location: Houston Texas

Jerommel wrote:
Aawww… They ruined the initial clean looks with fins that probably have little effect anyway….

I don’t know about that. They both look pretty nice to me.

It’s hard to say if the increased surface area around the emitter shelf will help at all or only a little since it’s such a massive amount of heat being dumped into it very quickly. Just having more mass in that area might help to increase the turbo run time.

My Convoy L6 thread with XHP70.2, Texas Avenger FET driver, Narsil ramping firmware, lighted side switch and cut down SMO reflector. Lots of amp draws on stock driver as well.
http://budgetlightforum.com/node/54477

My Supfire L5-6 thread with XHP70, Texas Avenger FET driver, Narsil ramping firmware and lighted side switch. My mini L6!
http://budgetlightforum.com/node/55746

freeme
freeme's picture
Offline
Last seen: 38 min 29 sec ago
Joined: 11/14/2013 - 22:00
Posts: 4452
Location: freedailydeals.org

I like simple design too, but please bare in mind that there are three XHP70 under its hood. cool Flashlight performance definitely outweigh "clean looks" for this case.

BeardedRaleigh
BeardedRaleigh's picture
Offline
Last seen: 28 min 24 sec ago
Joined: 08/16/2016 - 23:45
Posts: 244
Location: Chico, CA

Interested. Put me down foe one.

Lj-_-
Lj-_-'s picture
Offline
Last seen: 4 weeks 23 hours ago
Joined: 02/23/2017 - 08:25
Posts: 81
Location: United Kingdom

I would be interested too depending upon price.

bigrick
Offline
Last seen: 7 hours 18 min ago
Joined: 01/19/2015 - 10:32
Posts: 31

Curious, please pm

Nitecore HC60, Convoy L6 XHP70
BLF A6 1a’s,Astrolux S2, BLF 348’s
Ultrafire 7XT6 Courui D01, Nitefighter F30B Warsun CT9T,sk68
UltraFire KH-T60 HA-II’s

korpzgrinda
korpzgrinda's picture
Offline
Last seen: 6 hours 55 min ago
Joined: 01/09/2017 - 16:52
Posts: 101
Location: Eastern Woodlands in the Wilderness of North America

Interested depending on price.

leaftye
Offline
Last seen: 59 min 13 sec ago
Joined: 07/25/2012 - 17:43
Posts: 3913
Location: San Diego, CA

I hope that chamfer on the fins make it through production. The sharp edges on the fins of my Haikelite aren’t something I want to buy more of.

The low mode should be lower.

Reviews: Efan IMR18350 700mAh 10.5A, <a href="http://

Enelooper
Enelooper's picture
Offline
Last seen: 4 weeks 1 day ago
Joined: 03/30/2016 - 03:50
Posts: 385
Location: USA

Modulor wrote:
I prefer the first design, its more elegant… more fat boy style, isn’t it??? I would like to see an hybrid version..

Is it posible include a Tripod screw with ring attachment + lanyard?

Yes, tripod mount please!!!

freeme
freeme's picture
Offline
Last seen: 38 min 29 sec ago
Joined: 11/14/2013 - 22:00
Posts: 4452
Location: freedailydeals.org

It is already shown in the rendering.

leaftye wrote:
I hope that chamfer on the fins make it through production. The sharp edges on the fins of my Haikelite aren't something I want to buy more of.


I will speak to them regarding tripod mount.

Can i have a show of hands, how many people really use this feature? I personally prefer to keep the price as low as possible.

Enelooper wrote:
Modulor wrote:
I prefer the first design, its more elegant... more fat boy style, isn't it??? I would like to see an hybrid version.. Is it posible include a Tripod screw with ring attachment + lanyard?
Yes, tripod mount please!!!
Pulsar
Pulsar's picture
Offline
Last seen: 19 hours 31 min ago
Joined: 07/29/2011 - 00:41
Posts: 5367
Location: Maine

Watching… this place has gone crazy with custom production lights

freeme
freeme's picture
Offline
Last seen: 38 min 29 sec ago
Joined: 11/14/2013 - 22:00
Posts: 4452
Location: freedailydeals.org

Flashlight scene has changed quite a bit over the years. In order to break free from MAP police, vendors have no choice but to produce there own in-house brands to satisfy our needs for better designs. Although these emerging brands might not be perfect, I can see that they have made tremendous improvements in a short span of time.

Pulsar wrote:
Watching... this place has gone crazy with custom production lights
Enelooper
Enelooper's picture
Offline
Last seen: 4 weeks 1 day ago
Joined: 03/30/2016 - 03:50
Posts: 385
Location: USA

A light of this much brightness and heft can really benefit from a tripod mount.

The photographer in me wants to use it for night time photography. Others may have other uses in mind.

leaftye
Offline
Last seen: 59 min 13 sec ago
Joined: 07/25/2012 - 17:43
Posts: 3913
Location: San Diego, CA
freeme wrote:

It is already shown in the rendering.

leaftye wrote:
I hope that chamfer on the fins make it through production. The sharp edges on the fins of my Haikelite aren’t something I want to buy more of.

A rendering isn’t production. Chamfers can be incorrectly sized or completely omitted in production for many reasons, typically for bad reasons. Because we see it in the rendering, not seeing it in the production version is an indication of disconnect between the designer and machinist.

The low mode should be lower.

Reviews: Efan IMR18350 700mAh 10.5A, <a href="http://

Jtm94
Online
Last seen: 52 sec ago
Joined: 02/22/2017 - 05:08
Posts: 93
Location: Pennsylvania

I also have interest in a tripod mount. I think it’s a simple feature to include in a light with this brightness.

freeme
freeme's picture
Offline
Last seen: 38 min 29 sec ago
Joined: 11/14/2013 - 22:00
Posts: 4452
Location: freedailydeals.org

Tripod mounting hole request submitted. cool

Jtm94 wrote:
I also have interest in a tripod mount. I think it's a simple feature to include in a light with this brightness.
AEDe
Offline
Last seen: 57 min 10 sec ago
Joined: 12/01/2016 - 12:07
Posts: 92
Location: Moscow

It is really good news.I also interested in tripod mount.

Lumens Industry
Offline
Last seen: 6 hours 57 min ago
Joined: 10/18/2013 - 07:24
Posts: 31
Location: Texas

interested

freeme
freeme's picture
Offline
Last seen: 38 min 29 sec ago
Joined: 11/14/2013 - 22:00
Posts: 4452
Location: freedailydeals.org

We could use one of this as a lanyard/ strap attachment point with the 1/4" hole too.

AEDe wrote:
It is really good news.I also interested in tripod mount.
Enelooper
Enelooper's picture
Offline
Last seen: 4 weeks 1 day ago
Joined: 03/30/2016 - 03:50
Posts: 385
Location: USA
freeme wrote:

We could use one of this as a lanyard/ strap attachment point with the 1/4” hole too.



AEDe wrote:
It is really good news.I also interested in tripod mount.

Good thinking!

And thank you for listening to our suggestions.

asnidi2
Offline
Last seen: 2 weeks 3 days ago
Joined: 05/12/2017 - 23:10
Posts: 12
Location: Germany

Interested depending on Price.

freeme
freeme's picture
Offline
Last seen: 38 min 29 sec ago
Joined: 11/14/2013 - 22:00
Posts: 4452
Location: freedailydeals.org

List updated.

Phantom1
Offline
Last seen: 11 hours 2 min ago
Joined: 05/13/2017 - 00:53
Posts: 56

when this fat boy come?

chooma
Offline
Last seen: 50 min 16 sec ago
Joined: 02/04/2016 - 01:07
Posts: 355
Location: USA

Interested…

Pages