Cutter.au XHP35 HI E4, XHP50.2 K2 collective order of interesting Cree LEDs

15 posts / 0 new
Last post
Lexel
Lexel's picture
Offline
Last seen: 8 hours 5 min ago
Joined: 11/01/2016 - 08:00
Posts: 2893
Location: Germany
Cutter.au XHP35 HI E4, XHP50.2 K2 collective order of interesting Cree LEDs

[Reviews] Miboxer C4-12, C2-4k+6k, C2, C4 / Astrolux K1, MF01, S42, K01 / BLF Q8 / Kalrus G35, XT11GT / Nitefox UT20 / Sofirn SF36, SP35 / Imalent DM21TW / Wuben I333 / Ravemen PR1200 / CL06 lantern / Xanes headlamp

[Mods] Skilhunt H03 short / Klarus XT12GTS / colorful anodisation

[Sale] TA drivers Narsil or Bistro, XHP35 E2-3C

Edited by: Lexel on 07/16/2017 - 17:11
Lexel
Lexel's picture
Offline
Last seen: 8 hours 5 min ago
Joined: 11/01/2016 - 08:00
Posts: 2893
Location: Germany

Ok someone bought all of the W2-2B

and this just minutes before I checked out and got an message they are gone

so whoever has those 66 W2s give me an option to get a few for my own lights

[Reviews] Miboxer C4-12, C2-4k+6k, C2, C4 / Astrolux K1, MF01, S42, K01 / BLF Q8 / Kalrus G35, XT11GT / Nitefox UT20 / Sofirn SF36, SP35 / Imalent DM21TW / Wuben I333 / Ravemen PR1200 / CL06 lantern / Xanes headlamp

[Mods] Skilhunt H03 short / Klarus XT12GTS / colorful anodisation

[Sale] TA drivers Narsil or Bistro, XHP35 E2-3C

AlexGT
AlexGT's picture
Online
Last seen: 13 sec ago
Joined: 06/07/2012 - 17:39
Posts: 3254
Location: Texas

LOL! Hopefully there will be more shortly

Agro
Offline
Last seen: 33 min 7 sec ago
Joined: 05/14/2017 - 11:16
Posts: 905
Location: Ślōnsk

Lexel wrote:
Ok someone bought all of the W2-2B

and this just minutes before I checked out and got an message they are gone

so whoever has those 66 W2s give me an option to get a few for my own lights


@Bocian has some 3B, may be willing to sale.
The_Driver
The_Driver's picture
Offline
Last seen: 3 hours 16 min ago
Joined: 10/20/2016 - 05:51
Posts: 430
Location: Germany

I am interested!

They also offer some very high-tech TIR lenses (although not in stock) – the large silicone Gaggione models (LLC56N7, LLC66N7). These produce a round spot without any spill! Moreso than normal TIR lenses.

djozz
djozz's picture
Offline
Last seen: 6 hours 38 min ago
Joined: 09/07/2012 - 17:04
Posts: 11021
Location: Amsterdam

Nice initiative!

“ XHP70.2 K4-3A 5000K CRI96 “
I would be very interested in more than 1 of this led, but looking at the Cutter page, are you sure it is a XHP70.2 and not XHP70 ?

Lexel
Lexel's picture
Offline
Last seen: 8 hours 5 min ago
Joined: 11/01/2016 - 08:00
Posts: 2893
Location: Germany

djozz wrote:
Nice initiative!

“ XHP70.2 K4-3A 5000K CRI96 “
I would be very interested in more than 1 of this led, but looking at the Cutter page, are you sure it is a XHP70.2 and not XHP70 ?

the part number XHP70-20
and picture shows 70.2
as well they were recently added

I can ask them if its really a 70.2

[Reviews] Miboxer C4-12, C2-4k+6k, C2, C4 / Astrolux K1, MF01, S42, K01 / BLF Q8 / Kalrus G35, XT11GT / Nitefox UT20 / Sofirn SF36, SP35 / Imalent DM21TW / Wuben I333 / Ravemen PR1200 / CL06 lantern / Xanes headlamp

[Mods] Skilhunt H03 short / Klarus XT12GTS / colorful anodisation

[Sale] TA drivers Narsil or Bistro, XHP35 E2-3C

djozz
djozz's picture
Offline
Last seen: 6 hours 38 min ago
Joined: 09/07/2012 - 17:04
Posts: 11021
Location: Amsterdam

Lexel wrote:
djozz wrote:
Nice initiative!

“ XHP70.2 K4-3A 5000K CRI96 “
I would be very interested in more than 1 of this led, but looking at the Cutter page, are you sure it is a XHP70.2 and not XHP70 ?

the part number XHP70-20
and picture shows 70.2
as well they were recently added

I can ask them if its really a 70.2


No need to ask them, I just had difficulty reading the page. It is confusing that they have a dedicated XHP50.2 category, but the XHP70.2’s are listed under the XHP70 category , moreover the data sheet pdf that goes with the page is the XHP70 one.
Anthon
Offline
Last seen: 5 hours 31 min ago
Joined: 09/07/2015 - 10:33
Posts: 221

Hi, I’m interested in this

XHP35 HI E4-3C 5000K
https://www.cutter.com.au/proddetail.php?prod=cut3023

but shipping cost to Spain is $60!

am I doing something wrong? is this collective order still running?

Lexel
Lexel's picture
Offline
Last seen: 8 hours 5 min ago
Joined: 11/01/2016 - 08:00
Posts: 2893
Location: Germany

The highest bin for XHP35 HI is E2-3C

I got some of those
6.5€ per piece 1€ shipping

[Reviews] Miboxer C4-12, C2-4k+6k, C2, C4 / Astrolux K1, MF01, S42, K01 / BLF Q8 / Kalrus G35, XT11GT / Nitefox UT20 / Sofirn SF36, SP35 / Imalent DM21TW / Wuben I333 / Ravemen PR1200 / CL06 lantern / Xanes headlamp

[Mods] Skilhunt H03 short / Klarus XT12GTS / colorful anodisation

[Sale] TA drivers Narsil or Bistro, XHP35 E2-3C

Anthon
Offline
Last seen: 5 hours 31 min ago
Joined: 09/07/2015 - 10:33
Posts: 221

Lexel wrote:
The highest bin for XHP35 HI is E2-3C

I got some of those
6.5€ per piece 1€ shipping


Interested, you’ve got a PM
Agro
Offline
Last seen: 33 min 7 sec ago
Joined: 05/14/2017 - 11:16
Posts: 905
Location: Ślōnsk
Lexel
Lexel's picture
Offline
Last seen: 8 hours 5 min ago
Joined: 11/01/2016 - 08:00
Posts: 2893
Location: Germany
Agro wrote:
E4 is still available on PCB: http://www.cutter.com.au/proddetail.php?prod=cut3022

I had a guy from forum that lives a few km from cutter there like 70% of what is listed in the onlineshop is not in stock

the only 2 bins above D were
HD E4-1C
HI E2-3C

[Reviews] Miboxer C4-12, C2-4k+6k, C2, C4 / Astrolux K1, MF01, S42, K01 / BLF Q8 / Kalrus G35, XT11GT / Nitefox UT20 / Sofirn SF36, SP35 / Imalent DM21TW / Wuben I333 / Ravemen PR1200 / CL06 lantern / Xanes headlamp

[Mods] Skilhunt H03 short / Klarus XT12GTS / colorful anodisation

[Sale] TA drivers Narsil or Bistro, XHP35 E2-3C

Agro
Offline
Last seen: 33 min 7 sec ago
Joined: 05/14/2017 - 11:16
Posts: 905
Location: Ślōnsk

So this guy says that Cutter makes up their listings? That’s a strong accusation.

KawiBoy1428
KawiBoy1428's picture
Offline
Last seen: 3 hours 14 min ago
Joined: 04/11/2014 - 18:05
Posts: 2316
Location: The Motor City
Lexel wrote:
Agro wrote:
E4 is still available on PCB: http://www.cutter.com.au/proddetail.php?prod=cut3022

I had a guy from forum that lives a few km from cutter there like 70% of what is listed in the onlineshop is not in stock

the only 2 bins above D were
HD E4-1C
HI E2-3C


I can believe it, I have dealt with Cutter more than a few times! Facepalm

I’m done with them, dealing with Cutter, well it’s like a box of chocolates, you just never know what your going to get! Sad

KB1428 “Live Life WOT”