Observations, parasitic drain, Nitecore EC4S

A few weeks back Amazon.ca offered a few Nitecore EC4S’s for a very low price - I think it was around $30. Never one to pass up a bargain, I grabbed one.

I recalled hearing parasitic drain stories regarding this light but not having the technical savvy to measure it, I tried my homespun method.

I charged up a pair of ‘young’ Panasonic 18650B’s to 4.20 v. and then ‘ran the edge off’ to 4.07 v. I put them in the EC4S on July 5 at 0900 hours and set it aside.

Starting at 4.07 v.,

After 100 hours, the batteries tested 4.06 v.
After 175 hours, the batteries tested 4.05 v.
After 270 hours, ” ” ” 4.05 v.
After 325 hours, (July 21) they tested 4.04 v.

I don’t know how bad that is; it doesn’t seem terrible to me but I don’t have the math skills to determine a proper rate of discharge. That’s 1/100 of a volt/week, so unless I’m missing something, it should be alright for a quite a while.

If I were setting the light aside for a lengthy period of weeks or months I’d no doubt take the batteries out - but it wouldn’t seem to be significant over the course of a two-week expedition, for example.

Any opinions, higher math calculations, or experiences with this light would be appreciated. I don’t have any self delusions about my redneck science experiments.

I kept my EC4S in the car for about 7 moths with fully charged cells and after that time and some minimal use they measured 3.5V, several members reported different self discharge current numbers, and Nitecore supposed to have fixed the issue after the first batch.