ENEDED

551 posts / 0 new
Last post
chakrawal
Offline
Last seen: 1 week 5 days ago
Joined: 10/16/2017 - 22:22
Posts: 54
Location: Bangkok

JasonWW wrote:
Do button tops add so much length?

So raised flat tops?

Maybe regular flat tops, but with thin magnets added?

I guess you could solder blob them to get just a tiny bit more height so they make contact.


I think the problem is the driver not batteries. Already 4 of them in this group.
hIKARInoob
hIKARInoob's picture
Offline
Last seen: 17 min 59 sec ago
Joined: 08/28/2016 - 08:15
Posts: 3989

chakrawal wrote:
JasonWW wrote:
Do button tops add so much length?

So raised flat tops?

Maybe regular flat tops, but with thin magnets added?

I guess you could solder blob them to get just a tiny bit more height so they make contact.


I think the problem is the driver not batteries. Already 4 of them in this group.

Both. Flickering leds is most likely driver problem. Uneven battery discharge cannot be a driver problem; it must be in the carrier/battery tube.

chakrawal
Offline
Last seen: 1 week 5 days ago
Joined: 10/16/2017 - 22:22
Posts: 54
Location: Bangkok

hIKARInoob wrote:
chakrawal wrote:
JasonWW wrote:
Do button tops add so much length?

So raised flat tops?

Maybe regular flat tops, but with thin magnets added?

I guess you could solder blob them to get just a tiny bit more height so they make contact.


I think the problem is the driver not batteries. Already 4 of them in this group.

Both. Flickering leds is most likely driver problem. Uneven battery discharge cannot be a driver problem; it must be in the carrier/battery tube.


Just put in Keeppower button top, let’s see what will happen.
hIKARInoob
hIKARInoob's picture
Offline
Last seen: 17 min 59 sec ago
Joined: 08/28/2016 - 08:15
Posts: 3989
chakrawal wrote:
Just put in Keeppower button top, let’s see what will happen.

I don’t know which Keeppower you’re using, but they might trip on turbo. As far as I know only the 3120 and 3000 Keeppower can handle the power. You could run the MT03 on high for some time, and check battery voltage if they’re even.

beam0
beam0's picture
Offline
Last seen: 1 year 1 month ago
Joined: 12/20/2011 - 23:18
Posts: 3195
Location: Pennsylvania

Please send code for this NW thanks

"Over 2000000 hours (about 200 years) standby time"  (DQG Tiny 4th)

"27,157 results for zoomable flashlight" (ebay)

 

 

askj
Offline
Last seen: 10 months 1 week ago
Joined: 10/27/2017 - 21:42
Posts: 49

Is there a review with this version? I’m still deciding between MT03 XHP 70.2 vs Olight X7. The construction with HaikeLite isn’t as solid as Olight (I haven’t own any HaikeLite yet, I read about it). There’s a mid turbo mode X7 at 5000lm but MT03 doesn’t. The MT03 has the newer XHP70.2 and slightly cheaper. Which one? Question

DENGOH
DENGOH's picture
Offline
Last seen: 3 hours 37 min ago
Joined: 10/06/2012 - 05:26
Posts: 2154

Looks like Haikelite solve the flickering issue with new driver.
Haikelite Official thread
__________
Hi

MT03s from End of Novermber are used a TA-based driver with HaikeLite UI , the brightness increased above 12000 lumens.

i saw 2-3 people had a driver problem with mt03, please contact the dealer/us to find a solution.

Thanks
haikelite
_______

cool i'll see you when you get there

JasonWW
JasonWW's picture
Offline
Last seen: 5 hours 6 min ago
Joined: 10/22/2016 - 11:41
Posts: 11346
Location: Houston Texas

DENGOH wrote:
Looks like Haikelite solve the flickering issue with new driver.
Haikelite Official thread
__________
Hi

MT03s from End of Novermber are used a TA-based driver with HaikeLite UI , the brightness increased above 12000 lumens.

i saw 2-3 people had a driver problem with mt03, please contact the dealer/us to find a solution.

Thanks
haikelite
_______


That is big news! The latest version now ship with a FET driver based on the Texas Avenger design from Texas Ace. This means 12,000 lumen! Same Haikelite UI, though.

I wonder if NarsilM can be flashed on it? Hmmm.

DENGOH
DENGOH's picture
Offline
Last seen: 3 hours 37 min ago
Joined: 10/06/2012 - 05:26
Posts: 2154

Ya. But one thing still bothering me is that BG is still showing 8xxx lumens on their page. It could be old stock.

cool i'll see you when you get there

Throwflooder
Throwflooder's picture
Offline
Last seen: 1 year 6 months ago
Joined: 11/30/2016 - 13:43
Posts: 6
Location: Berlin

Interested in NW

I am on my path of enlightenment... hmm, better to use therefor the DX80 or the TN42?

JasonWW
JasonWW's picture
Offline
Last seen: 5 hours 6 min ago
Joined: 10/22/2016 - 11:41
Posts: 11346
Location: Houston Texas

DENGOH wrote:
Ya. But one thing still bothering me is that BG is still showing 8xxx lumens on their page. It could be old stock.

Have you seen their new MT09R? It has a TA and it says Stepless control. Maybe ramping? Maybe NarsilM? 15,000 lumen. Deeper reflectors and more heatsinking. Very interesting.
DENGOH
DENGOH's picture
Offline
Last seen: 3 hours 37 min ago
Joined: 10/06/2012 - 05:26
Posts: 2154

JasonWW wrote:
DENGOH wrote:
Ya. But one thing still bothering me is that BG is still showing 8xxx lumens on their page. It could be old stock.

Have you seen their new MT09R? It has a TA and it says Stepless control. Maybe ramping? Maybe NarsilM? 15,000 lumen. Deeper reflectors and more heatsinking. Very interesting.

Ya, i am very excited to see Haikelite rolling out new products unique to their brand. I like their current UI though, ramping is fine too i guess.

cool i'll see you when you get there

pustelnik
pustelnik's picture
Offline
Last seen: 3 months 3 weeks ago
Joined: 06/01/2017 - 08:23
Posts: 17
Location: EU

Interested! Smile

freeme
freeme's picture
Online
Last seen: 3 min 10 sec ago
Joined: 11/14/2013 - 22:00
Posts: 7623

MT03 II with new driver now.

©freemex1thedeals.com

fed893
Offline
Last seen: 4 months 3 weeks ago
Joined: 02/01/2016 - 17:16
Posts: 67
Location: SoCal

Interested in the white in NW tint,

Nicolicous
Nicolicous's picture
Offline
Last seen: 2 hours 38 min ago
Joined: 04/16/2016 - 08:28
Posts: 1456
Location: Australia
freeme wrote:

MT03 II with new driver now.

Any changes to the new driver?

Nico -.-

Agro
Agro's picture
Online
Last seen: 56 sec ago
Joined: 05/14/2017 - 11:16
Posts: 4495
Location: Ślōnsk

Probably not interested, but would like to know the price.

JasonWW
JasonWW's picture
Offline
Last seen: 5 hours 6 min ago
Joined: 10/22/2016 - 11:41
Posts: 11346
Location: Houston Texas
Nicolicous wrote:
freeme wrote:

MT03 II with new driver now.

Any changes to the new driver?


JasonWW wrote:
DENGOH wrote:
Looks like Haikelite solve the flickering issue with new driver.
Haikelite Official thread
__________
Hi

MT03s from End of Novermber are used a TA-based driver with HaikeLite UI , the brightness increased above 12000 lumens.

i saw 2-3 people had a driver problem with mt03, please contact the dealer/us to find a solution.

Thanks
haikelite
_______


That is big news! The latest version now ship with a FET driver based on the Texas Avenger design from Texas Ace. This means 12,000 lumen! Same Haikelite UI, though.

I wonder if NarsilM can be flashed on it? Hmmm.

biczownia
Offline
Last seen: 9 months 2 weeks ago
Joined: 08/30/2017 - 06:09
Posts: 7
Location: Poland

Please send me the code, interested in:
Tint: NW
Emitter: CREE XHP70.2
Black version

carmantl
Offline
Last seen: 3 hours 45 min ago
Joined: 03/22/2012 - 22:25
Posts: 438
Location: TN

Interested in white NW, please send code, and thanks!

themagicconch
Offline
Last seen: 1 year 8 months ago
Joined: 01/09/2016 - 11:02
Posts: 3

Interested in black NW, thank you.

JasonWW
JasonWW's picture
Offline
Last seen: 5 hours 6 min ago
Joined: 10/22/2016 - 11:41
Posts: 11346
Location: Houston Texas

Is this thread now transitioning into the 12,000 lumen model?

I just realized I never asked for a code. Can you send me a code for a CW version? Thanks

Ruchira88
Offline
Last seen: 6 months 4 days ago
Joined: 11/24/2017 - 10:51
Posts: 13
Location: Australia

Interested in new 12000 lumens version. NW White

Please send the coupon

fed893
Offline
Last seen: 4 months 3 weeks ago
Joined: 02/01/2016 - 17:16
Posts: 67
Location: SoCal

Code for NW, is there a model # change or suffix to denote the new updates?

freeme
freeme's picture
Online
Last seen: 3 min 10 sec ago
Joined: 11/14/2013 - 22:00
Posts: 7623

Sorry for the late reply. I have forwarded you our group buy information.

Ruchira88 wrote:
Interested in new 12000 lumens version. NW White Please send the coupon

 

NW is available in "White" at the moment. I was told they have sent the remaining lights back to HaikeLite after members have some issues with 1st batch.

fed893 wrote:
Code for NW, is there a model # change or suffix to denote the new updates?

©freemex1thedeals.com

freeme
freeme's picture
Online
Last seen: 3 min 10 sec ago
Joined: 11/14/2013 - 22:00
Posts: 7623

Both colors and tints are instock now.

©freemex1thedeals.com

troisanh
Offline
Last seen: 3 weeks 2 days ago
Joined: 02/24/2013 - 07:19
Posts: 746
Location: midwest

freeme wrote:

MT03 II with new driver now.


can we order the new driver for those who have the old light/driver?
vinte77
Offline
Last seen: 2 days 17 hours ago
Joined: 03/04/2014 - 18:43
Posts: 737
Location: California

Can I get the code for NW in white, thanks.

JasonWW
JasonWW's picture
Offline
Last seen: 5 hours 6 min ago
Joined: 10/22/2016 - 11:41
Posts: 11346
Location: Houston Texas

troisanh wrote:
freeme wrote:

MT03 II with new driver now.


can we order the new driver for those who have the old light/driver?

This would seem unlikely.

You can always buy a new one from Lexel, though, and get the full NarsilM UI, plus other custom touches programmed in.
http://budgetlightforum.com/node/56618

freeme
freeme's picture
Online
Last seen: 3 min 10 sec ago
Joined: 11/14/2013 - 22:00
Posts: 7623

I afraid you might have to request from HaikeLite direct.

troisanh wrote:
freeme wrote:

MT03 II with new driver now.

can we order the new driver for those who have the old light/driver?

©freemex1thedeals.com

Pages