Narsil temp problem

3 posts / 0 new
Last post
JIGHEADWORM
Offline
Last seen: 1 month 2 weeks ago
Joined: 07/02/2017 - 18:04
Posts: 246
Location: Tennessee
Narsil temp problem

I modded a skilhunt h03 with a xhp50 and a TA nasil m driver in 2s. Light starts out at 2700 lumens at 45 seconds it steps down to 1250 lumens but it stays there and doesn’t step down any more but gets burning hot. temp is set on 60c.

JIGHEADWORM
Offline
Last seen: 1 month 2 weeks ago
Joined: 07/02/2017 - 18:04
Posts: 246
Location: Tennessee

bump

Lexel
Lexel's picture
Offline
Last seen: 12 hours 43 min ago
Joined: 11/01/2016 - 08:00
Posts: 4155
Location: Germany

Hmm this is odd, but 60dC on the driver may be 70 on the head, which is burning hot, but possible the temp stabilizes there
Such powerful emitters in a small light I would go to 50 or 55dC

Even if its timed turbo stepdown it will stay there, but if you want less heat you can remove one or 2 AMCs