CRX Brass Zoomie Nichia 319A 16340 EXII

9 posts / 0 new
Last post
CRX
CRX's picture
Offline
Last seen: 47 min 40 sec ago
Joined: 04/02/2013 - 15:27
Posts: 2200
Location: Scotland
CRX Brass Zoomie Nichia 319A 16340 EXII

Another wee build for your viewing pleasure today, following on from the EXI triple mule build.

I  made a 16340 zoomie to go with it.

Nichia 319A SM505 emitter
20mm KD DTP MCPCB
17mm 3A 7135 driver

Glass aspheric
Soldered MCPCB, pill & driver
Reverse clicky tail switch
Cyan glow details

Length – 84 mm
Width – 22 mm

 

Some internal pics showing friction ring, brass stopper rings etc

 Closed position

Opened, focused position & tail

This light is a side loader, the sliding drawer performs two functions, cell replacement and zoom function.

The change of colour from brass to black on the cell carrier near the switch denotes where the maximum zoom position is, so you pull out the tail unit until the line is level with the main body and that is where the emitter is focused as seen below.

Like a normal push pull zoomie it has a rubber o-ring for friction as seen above.

How it works

The set

Some comparison pics

 

Edited by: CRX on 12/05/2017 - 15:45
MRsDNF
MRsDNF's picture
Offline
Last seen: 10 hours 49 min ago
Joined: 12/22/2011 - 21:18
Posts: 11690
Location: A light beam away from the missus in the land of Aus.

Very nice CRX. Love the novel idea of side loading the battery. Thumbs Up

My current and or voltage measurements are only relevent to anything that I measure.

Budget light hobby proudly sponsored by my Mastercard and unknowingly paid for by a hard working wife. 

djozz said "it came with chinese lettering that is chinese to me".

old4570 said "I'm not an expert , so don't suffer from any such technical restrictions".

Old-Lumens. Highly admired and cherished member of Budget Light Forum. 11.5.2011 - 20.12.16. RIP.

 

CRX
CRX's picture
Offline
Last seen: 47 min 40 sec ago
Joined: 04/02/2013 - 15:27
Posts: 2200
Location: Scotland

Thanks mate. It made the light a little longer doing it that way but worked out well.

vwpieces
vwpieces's picture
Offline
Last seen: 8 hours 15 min ago
Joined: 07/17/2016 - 19:49
Posts: 1794
Location: PA, USA

Nice build CRX!
The 319A Hex’s tint looks nice under glass.
I need to be more kind to them, less and regulated current. Facepalm

CRX
CRX's picture
Offline
Last seen: 47 min 40 sec ago
Joined: 04/02/2013 - 15:27
Posts: 2200
Location: Scotland

I was wary of the combination as I had read the glass lenses were not as good as the plastic and first time using one but the beam is good, you can detect a small colour shift in the centre when zoomed out shining on a white wall but would never notice in real use.

jacktheclipper
jacktheclipper's picture
Offline
Last seen: 2 hours 42 min ago
Joined: 10/31/2010 - 21:18
Posts: 4786
Location: Florida , U.S.A.

Another creative build , CRX .
Thanks for sharing .

CRX
CRX's picture
Offline
Last seen: 47 min 40 sec ago
Joined: 04/02/2013 - 15:27
Posts: 2200
Location: Scotland

Thanks Jack Beer

ven
ven's picture
Online
Last seen: 5 min 28 sec ago
Joined: 09/09/2016 - 11:39
Posts: 421
Location: Manchester

The king of innovation, awesome work Thumbs Up

That little 47’s triple, i need to find me one of those! Big Smile

CRX
CRX's picture
Offline
Last seen: 47 min 40 sec ago
Joined: 04/02/2013 - 15:27
Posts: 2200
Location: Scotland

Thanks Ven. Yeah one of my favorites that one Smile