WTB Xhp 35 HI E2 3C

76 posts / 0 new
Last post

Pages

Touchofred
Offline
Last seen: 28 min 15 sec ago
Joined: 11/11/2012 - 17:41
Posts: 200
Location: Sweden
WTB Xhp 35 HI E2 3C

Hello.

I want to change the led in My Manker mk35 to increase output.
But I can’t find this led anywhere, it’s out of stock.
Is there any friendly soul out there who can sell me two pcs?
I need two if I would fail, never reflowed a led before.

Thanks guys !

MRsDNF
MRsDNF's picture
Offline
Last seen: 4 hours 42 min ago
Joined: 12/22/2011 - 21:18
Posts: 12284
Location: A light beam away from the missus in the land of Aus.

Lexel should be able to help you out with your leds.

My current and or voltage measurements are only relevent to anything that I measure.

Budget light hobby proudly sponsored by my Mastercard and unknowingly paid for by a hard working wife. 

djozz said "it came with chinese lettering that is chinese to me".

old4570 said "I'm not an expert , so don't suffer from any such technical restrictions".

Old-Lumens. Highly admired and cherished member of Budget Light Forum. 11.5.2011 - 20.12.16. RIP.

 

Lexel
Lexel's picture
Online
Last seen: 10 min 42 sec ago
Joined: 11/01/2016 - 08:00
Posts: 4052
Location: Germany

The last 50 I had ordered are gone.

Touchofred
Offline
Last seen: 28 min 15 sec ago
Joined: 11/11/2012 - 17:41
Posts: 200
Location: Sweden
Lexel wrote:
The last 50 I had ordered are gone.

Ok, that’s a bummer.

I do have a question though. How big of difference is it between Xhp 35 hi e2 3c vs. Xhp 35 hi d2 3D?

Lexel
Lexel's picture
Online
Last seen: 10 min 42 sec ago
Joined: 11/01/2016 - 08:00
Posts: 4052
Location: Germany

464kcd vs. 538kcd on last that I swapped in a Astrolux MF02

Touchofred
Offline
Last seen: 28 min 15 sec ago
Joined: 11/11/2012 - 17:41
Posts: 200
Location: Sweden

Didn’t know it would be such a big difference.
Im in touch with a dealer here in sweden, that hopefully has the E2 3C in stock.

Lexel wrote:
464kcd vs. 538kcd on last that I swapped in a Astrolux MF02
nofearek9
nofearek9's picture
Offline
Last seen: 6 hours 1 min ago
Joined: 07/08/2012 - 08:46
Posts: 1328
Location: Cyprus

in for the search…

10fp
Offline
Last seen: 3 months 1 day ago
Joined: 03/29/2017 - 02:06
Posts: 79
Location: down under

lets us know where to get some E2 3C xhp 35 i Want to fit to my 5 amp UT02

thnx Dave

BLF A6
a few C8`s,
HS 802, dd SST40 @4.6 amps,
P30,
S70s,
UT02 - 5 amps and luv it !
Klarus G35
Maxtoch New Sniper M24 dd U3
MF02 , E2 3C
i think iv got it covered !

Anthon
Offline
Last seen: 36 min 31 sec ago
Joined: 09/07/2015 - 10:33
Posts: 347

yes, that led it’s awesome

Nicolicous
Nicolicous's picture
Online
Last seen: 12 min 59 sec ago
Joined: 04/16/2016 - 08:28
Posts: 1140
Location: Australia

cutter.com.au have some but it’s with quad pad.

im asking them to sell bare LED Smile fingers cross.

Touchofred
Offline
Last seen: 28 min 15 sec ago
Joined: 11/11/2012 - 17:41
Posts: 200
Location: Sweden

If dealer has them in stock, I’ll let you know.
The dealer is from Sweden, so it’s going to be more expensive than in USA.

10fp wrote:
lets us know where to get some E2 3C xhp 35 i Want to fit to my 5 amp UT02 thnx Dave
Lexel
Lexel's picture
Online
Last seen: 10 min 42 sec ago
Joined: 11/01/2016 - 08:00
Posts: 4052
Location: Germany

Nicolicous wrote:
cutter.com.au have some but it’s with quad pad.

im asking them to sell bare LED Smile fingers cross.

Cutter has no more E2-3C left, their website sucks you cant go for the in stock notice at all

They solder LEDs from reel to stars only after you order it, never to build a stock with the presoldered stars

10fp
Offline
Last seen: 3 months 1 day ago
Joined: 03/29/2017 - 02:06
Posts: 79
Location: down under

Thanks for the heads up Lexel
I was just about to purchase from them

update .. cutters hav them , i got one and service was Fast . thanks Cutters

BLF A6
a few C8`s,
HS 802, dd SST40 @4.6 amps,
P30,
S70s,
UT02 - 5 amps and luv it !
Klarus G35
Maxtoch New Sniper M24 dd U3
MF02 , E2 3C
i think iv got it covered !

Nicolicous
Nicolicous's picture
Online
Last seen: 12 min 59 sec ago
Joined: 04/16/2016 - 08:28
Posts: 1140
Location: Australia

sorry to dig out the out post.

Im looking to upgrade my the LED for my throwers too and found cutter website have them in stock with the 20mm board

https://www.cutter.com.au/proddetail.php?prod=cut2678

MRsDNF
MRsDNF's picture
Offline
Last seen: 4 hours 42 min ago
Joined: 12/22/2011 - 21:18
Posts: 12284
Location: A light beam away from the missus in the land of Aus.

Cutter dont have these in stock. I bought the last four they had a few weeks ago. I have three left I’m keeping for a build. Sorry.

My current and or voltage measurements are only relevent to anything that I measure.

Budget light hobby proudly sponsored by my Mastercard and unknowingly paid for by a hard working wife. 

djozz said "it came with chinese lettering that is chinese to me".

old4570 said "I'm not an expert , so don't suffer from any such technical restrictions".

Old-Lumens. Highly admired and cherished member of Budget Light Forum. 11.5.2011 - 20.12.16. RIP.

 

Lexel
Lexel's picture
Online
Last seen: 10 min 42 sec ago
Joined: 11/01/2016 - 08:00
Posts: 4052
Location: Germany

same for me I have only 3 left and keeping em for me, I had 51 others from which I sold 45 and repaired 6 lights

Nicolicous
Nicolicous's picture
Online
Last seen: 12 min 59 sec ago
Joined: 04/16/2016 - 08:28
Posts: 1140
Location: Australia

oh bugger Sad

it’s seems this led is rare to find Shocked

giorgoskok
giorgoskok's picture
Offline
Last seen: 9 hours 3 min ago
Joined: 11/13/2015 - 10:46
Posts: 2641
Location: Greece

Found 4pcs of xhp35 hi E2 1A , older stock , from a modder .

I didn’t really believe they were E2 1A at first , but he had the label from the reel too Wink

Nicolicous
Nicolicous's picture
Online
Last seen: 12 min 59 sec ago
Joined: 04/16/2016 - 08:28
Posts: 1140
Location: Australia

where can i some of them LEDs giorgoskok?

im hunting for them so i can mod my throwers

Anthon
Offline
Last seen: 36 min 31 sec ago
Joined: 09/07/2015 - 10:33
Posts: 347

I’ve modded 3 lights with this led, and I still have one reserved for the BLF GT, would buy more if there’s a chance

Lexel
Lexel's picture
Online
Last seen: 10 min 42 sec ago
Joined: 11/01/2016 - 08:00
Posts: 4052
Location: Germany

should have bought more than 50 in the first place

giorgoskok
giorgoskok's picture
Offline
Last seen: 9 hours 3 min ago
Joined: 11/13/2015 - 10:46
Posts: 2641
Location: Greece

Nicolicous wrote:
where can i some of them LEDs giorgoskok?

im hunting for them so i can mod my throwers

Unfortunately as i mentioned i bought them from a fellow modder , not a shop etc

Let’s hope a shop will finally find some E2 bin leds .

Touchofred
Offline
Last seen: 28 min 15 sec ago
Joined: 11/11/2012 - 17:41
Posts: 200
Location: Sweden

Kaidomain has this one, Cree XHP35 HI C4 40E. Bit how big of difference is it between E2 3C? Im guessing a big it’s a difference since they Are in stock.. Because When im looking at the documents on crees website, im pretty Much lost. I Can’t understand the different charts etc.

Lexel
Lexel's picture
Online
Last seen: 10 min 42 sec ago
Joined: 11/01/2016 - 08:00
Posts: 4052
Location: Germany
Touchofred wrote:
Kaidomain has this one, Cree XHP35 HI C4 40E. Bit how big of difference is it between E2 3C? Im guessing a big it’s a difference since they Are in stock.. Because When im looking at the documents on crees website, im pretty Much lost. I Can’t understand the different charts etc.

C4 has only 79% of the brightness than the E2
the D4-3A were sold within a day, some manufactory grabbed all

Touchofred
Offline
Last seen: 28 min 15 sec ago
Joined: 11/11/2012 - 17:41
Posts: 200
Location: Sweden
Lexel wrote:
Touchofred wrote:
Kaidomain has this one, Cree XHP35 HI C4 40E. Bit how big of difference is it between E2 3C? Im guessing a big it’s a difference since they Are in stock.. Because When im looking at the documents on crees website, im pretty Much lost. I Can’t understand the different charts etc.

C4 has only 79% of the brightness than the E2
the D4-3A were sold within a day, some manufactory grabbed all

Oh ok. Its a shame its almost impossible to get the good bins it seems like.
Thanks for the reply

AlexGT
AlexGT's picture
Offline
Last seen: 1 hour 28 min ago
Joined: 06/07/2012 - 17:39
Posts: 3749
Location: Texas
welight
welight's picture
Offline
Last seen: 3 weeks 2 days ago
Joined: 11/23/2013 - 17:42
Posts: 147
Location: Melbourne

I have 30 pcs inbound from Cree should be here before the weekend

Cutter Electronics Pty Ltd
Web: www.cutter.com.au

BLF DISCOUNT 8%
Code:BLFDISCOUNT

Agro
Offline
Last seen: 6 hours 50 min ago
Joined: 05/14/2017 - 11:16
Posts: 2409
Location: Ślōnsk

welight, how about the E4 in your shop?

welight
welight's picture
Offline
Last seen: 3 weeks 2 days ago
Joined: 11/23/2013 - 17:42
Posts: 147
Location: Melbourne

Agro wrote:
welight, how about the E4 in your shop?

Cutter Electronics Pty Ltd
Web: www.cutter.com.au

BLF DISCOUNT 8%
Code:BLFDISCOUNT

troisanh
Offline
Last seen: 1 hour 23 min ago
Joined: 02/24/2013 - 07:19
Posts: 735
Location: midwest

welight wrote:
Agro wrote:
welight, how about the E4 in your shop?

!{width:50%}http://www.cutter.com.au/prodimages/IMG_1024.jpg!

Would like to buy couple bare leds or even on Tpad, do you have link to exact item(s)?

Thanks.

10fp
Offline
Last seen: 3 months 1 day ago
Joined: 03/29/2017 - 02:06
Posts: 79
Location: down under

welight, thanks for your fast service , you sent a E2 3c to me last week on a mcpcb

can i get 2 more leds not fitted to a star pls if so pm me

thanks Dave in Adelaide

edit , just spoke on the phone and more great service ( E2 3C leds only, are available ) thanks Cutters

BLF A6
a few C8`s,
HS 802, dd SST40 @4.6 amps,
P30,
S70s,
UT02 - 5 amps and luv it !
Klarus G35
Maxtoch New Sniper M24 dd U3
MF02 , E2 3C
i think iv got it covered !

Pages