LH351D 5000K ,LH351B 3000K .GB . price drop.

806 posts / 0 new
Last post
BlueSwordM
BlueSwordM's picture
Offline
Last seen: 2 hours 4 min ago
Joined: 11/29/2017 - 12:34
Posts: 4738
Location: Canada

The LH351D/B would be suitable in your case. Just be careful you don’t burn your hand LOL

My very own high current Beryllium Copper springs Gen 3:
http://budgetlightforum.com/node/67401
Liitokala Aliexpress Stores Battery Fraud: http://budgetlightforum.com/node/60547

Lightbringer
Lightbringer's picture
Offline
Last seen: 1 hour 9 min ago
Joined: 08/30/2016 - 14:12
Posts: 8469
Location: nyc

Use the B if you can.

I still got the wonky TK05 with loose LED, so I think I’ll stick a B on there.

09 F9 11 02 9D 74 E3 5B D8 41 56 C5 63 56 88 C0

ToyKeeper
ToyKeeper's picture
Offline
Last seen: 2 hours 12 min ago
Joined: 01/12/2013 - 14:40
Posts: 9610
Location: (469219) 2016 HO3

12,000 posts later…

djozz wrote:
I have sunken deep into this hobby
doubleone44
doubleone44's picture
Offline
Last seen: 1 week 5 days ago
Joined: 08/05/2015 - 11:42
Posts: 172
Location: The Netherlands

Got my leds a few days ago, and I must say, they are really nice. The LH351Ds trump my 4000K nichias in just about every aspect, more output and less tint shift, but they are a little bit colder (4200K). I put some in a triple and it’s awesome.
The 3000K LH351Bs are also nice and warm, and are a perfect fit for previous XP-G2 lights.

DBSAR
DBSAR's picture
Offline
Last seen: 35 min 25 sec ago
Joined: 02/11/2013 - 23:28
Posts: 5579
Location: Ontario, Canada

Did AEDe go missing? ( he has been offline for 8 + days. I sent him some messages but haven’t heard back. (been trying to get 4 of each of the 3000K & 4000K high CRI LH351’s for the BLF Lantern project testing.

That Canadian flashlight guy & Lantern Guru -Den / DBSARlight

BlueSwordM
BlueSwordM's picture
Offline
Last seen: 2 hours 4 min ago
Joined: 11/29/2017 - 12:34
Posts: 4738
Location: Canada

I wouldn’t worry until next week.

He said the last order was mine at 10pcs of 351Bs, and he said to wait for about 2 weeks until he could get

So until next week, I’m not really worried. We should wait a bit. I’m going to PM him next week if he doesn’t respond.

My very own high current Beryllium Copper springs Gen 3:
http://budgetlightforum.com/node/67401
Liitokala Aliexpress Stores Battery Fraud: http://budgetlightforum.com/node/60547

Edness
Edness's picture
Offline
Last seen: 2 days 16 hours ago
Joined: 10/29/2016 - 16:57
Posts: 355
Location: NYC

My order was shipped a few weeks ago…still waiting for it. Looking forward to build a triple with them.

djozz
djozz's picture
Offline
Last seen: 17 hours 58 min ago
Joined: 09/07/2012 - 17:04
Posts: 15302
Location: Amsterdam

When I’m not at home or on holiday, I still daily check in on BLF but I consider that as borderline idiotic behaviour, perhaps AEDe lives a more normal life than some of us Facepalm

Bob_McBob
Offline
Last seen: 40 min 48 sec ago
Joined: 08/14/2016 - 04:53
Posts: 472
Location: Canada

I received my second order of 10 LH351Ds in Ontario today, shipped April 18.

Boaz
Boaz's picture
Offline
Last seen: 15 hours 26 min ago
Joined: 11/07/2010 - 09:31
Posts: 7022
Location: Birthplace of Aviation
Bob_McBob wrote:
I received my second order of 10 LH351Ds in Ontario today, shipped April 18.
Yeah… I’m waiting on my first ones . So happy to hear you’ve got yours . Note to self …Kill Bob McBob

       καὶ τὸ φῶς ἐν τῇ σκοτίᾳ φαίνει καὶ ἡ σκοτία αὐτὸ οὐ κατέλαβεν

                                  https://www.gty.org/

 

    Still selling diffuser film  >…  http://budgetlightforum.com/node/42208

Bob_McBob
Offline
Last seen: 40 min 48 sec ago
Joined: 08/14/2016 - 04:53
Posts: 472
Location: Canada
khas
Offline
Last seen: 2 hours 22 min ago
Joined: 08/08/2014 - 07:20
Posts: 909
Location: Denmark

My order of LH351B´s arrived in Denmark today shipped April 24.

-X3-
-X3-'s picture
Offline
Last seen: 12 hours 3 min ago
Joined: 07/16/2014 - 03:28
Posts: 2688
Location: France, Angers

Is it still possible to order some o those little gems ?
I totally missed that thread for an unknown reason

"-X3-, is there any place in your house without a flashlight ?" 

My Flashlight public album (mods, emitter swaps, eye candy)

My reviews channel (French language, Olight, Thorfire, Sofirn, Lumintop : 60+ lights tested)

My personal channel (including Olight SR mini, S1, S2, S1A and S-mini disassembly)

M4DM4X blog, saves you $$$ 

DBSAR
DBSAR's picture
Offline
Last seen: 35 min 25 sec ago
Joined: 02/11/2013 - 23:28
Posts: 5579
Location: Ontario, Canada
X3 wrote:
Is it still possible to order some o those little gems ? I totally missed that thread for an unknown reason

Unknown. I sent him a PM inquiring on some of these too, but has has not logged on to BLF in over a week.

That Canadian flashlight guy & Lantern Guru -Den / DBSARlight

The_Driver
The_Driver's picture
Offline
Last seen: 1 day 19 hours ago
Joined: 10/20/2016 - 05:51
Posts: 1368
Location: Germany

I used one of my LH351Ds here (it’s in German). It’s much nicer than the XP-L2 4000K 90CRI when used in reflectors. At very high currents the tint becomes slightly pinkish/reddisch, which looks very nice. The tint is very even, but still not perfect, the corona ist yellow.

I’m happy that there is finally a XP-L sized high-cri LED with good tint. To me it’s the most obvious size missing in Nichias offering, sadly, because I think it’s probably the most practical of the current sizes.

-X3-
-X3-'s picture
Offline
Last seen: 12 hours 3 min ago
Joined: 07/16/2014 - 03:28
Posts: 2688
Location: France, Angers

The_Driver wrote:
I used one of my LH351Ds here (it’s in German). It’s much nicer than the XP-L2 4000K 90CRI when used in reflectors. At very high currents the tint becomes slightly pinkish/reddisch, which looks very nice.

I’m happy that there is finally a XP-L sized high-cri LED with good tint. To me it’s the most obvious size missing in Nichias offering, sadly, because I think it’s probably the most practical of the current sizes.


This seems really nice…
Would you spare some with me ? Big Smile

"-X3-, is there any place in your house without a flashlight ?" 

My Flashlight public album (mods, emitter swaps, eye candy)

My reviews channel (French language, Olight, Thorfire, Sofirn, Lumintop : 60+ lights tested)

My personal channel (including Olight SR mini, S1, S2, S1A and S-mini disassembly)

M4DM4X blog, saves you $$$ 

The_Driver
The_Driver's picture
Offline
Last seen: 1 day 19 hours ago
Joined: 10/20/2016 - 05:51
Posts: 1368
Location: Germany

X3 wrote:
The_Driver wrote:
I used one of my LH351Ds here (it’s in German). It’s much nicer than the XP-L2 4000K 90CRI when used in reflectors. At very high currents the tint becomes slightly pinkish/reddisch, which looks very nice.

I’m happy that there is finally a XP-L sized high-cri LED with good tint. To me it’s the most obvious size missing in Nichias offering, sadly, because I think it’s probably the most practical of the current sizes.


This seems really nice…
Would you spare some with me ? Big Smile

Sorry, I only got a very small amount which I intend to use all. Sad

-X3-
-X3-'s picture
Offline
Last seen: 12 hours 3 min ago
Joined: 07/16/2014 - 03:28
Posts: 2688
Location: France, Angers

The_Driver wrote:
X3 wrote:
The_Driver wrote:
I used one of my LH351Ds here (it’s in German). It’s much nicer than the XP-L2 4000K 90CRI when used in reflectors. At very high currents the tint becomes slightly pinkish/reddisch, which looks very nice.

I’m happy that there is finally a XP-L sized high-cri LED with good tint. To me it’s the most obvious size missing in Nichias offering, sadly, because I think it’s probably the most practical of the current sizes.


This seems really nice…
Would you spare some with me ? Big Smile

Sorry, I only got a very small amount which I intend to use all. Sad


Understood Innocent
Anyone else in EU ?

"-X3-, is there any place in your house without a flashlight ?" 

My Flashlight public album (mods, emitter swaps, eye candy)

My reviews channel (French language, Olight, Thorfire, Sofirn, Lumintop : 60+ lights tested)

My personal channel (including Olight SR mini, S1, S2, S1A and S-mini disassembly)

M4DM4X blog, saves you $$$ 

djozz
djozz's picture
Offline
Last seen: 17 hours 58 min ago
Joined: 09/07/2012 - 17:04
Posts: 15302
Location: Amsterdam

If I keep them they will all be used, but I can spare 2 leds for good cause. Smile
Unless someone else has bought too many?

Bob_McBob
Offline
Last seen: 40 min 48 sec ago
Joined: 08/14/2016 - 04:53
Posts: 472
Location: Canada

The_Driver wrote:
I used one of my LH351Ds here (it’s in German). It’s much nicer than the XP-L2 4000K 90CRI when used in reflectors. At very high currents the tint becomes slightly pinkish/reddisch, which looks very nice.

I’m happy that there is finally a XP-L sized high-cri LED with good tint. To me it’s the most obvious size missing in Nichias offering, sadly, because I think it’s probably the most practical of the current sizes.

I’m also interested in trying an LH351D it in a reflector light, so I might stick one in my C8, which is kind of ugly with a 219C. It looks great as drop-in replacement in all the 3V Armytek lights and also behaves much better with a XP-L size optics because the size is much closer. I’m really happy to have an option that is physically so similar to the XP-L. I do notice a tint shift with current as well, but it looks pretty good on all levels, and especially at higher output. Since the 219C is often a little green to begin with it subjectively seems rather similar side-by-side.

-X3-
-X3-'s picture
Offline
Last seen: 12 hours 3 min ago
Joined: 07/16/2014 - 03:28
Posts: 2688
Location: France, Angers

djozz wrote:
If I keep them they will all be used, but I can spare 2 leds for good cause. Smile
Unless someone else has bought too many?

That’s really nice from you Djozz !
To be honest was hoping to buy 4 for a single and a triple but I can always test it with one or two and buy more later if this can happen

"-X3-, is there any place in your house without a flashlight ?" 

My Flashlight public album (mods, emitter swaps, eye candy)

My reviews channel (French language, Olight, Thorfire, Sofirn, Lumintop : 60+ lights tested)

My personal channel (including Olight SR mini, S1, S2, S1A and S-mini disassembly)

M4DM4X blog, saves you $$$ 

djozz
djozz's picture
Offline
Last seen: 17 hours 58 min ago
Joined: 09/07/2012 - 17:04
Posts: 15302
Location: Amsterdam

Anyone else wanting to help out a dedicated french modder with a couple of leds? Smile

gisewhcs
Offline
Last seen: 19 hours 16 min ago
Joined: 09/11/2015 - 01:47
Posts: 137
Location: Germany

Mine are stuck in customs at the moment.
But I’ll do the same as djozz.
When I have them in my hands I’ll send two to France.

X3, I’ll send you a Pm, when they arrive!

BlueSwordM
BlueSwordM's picture
Offline
Last seen: 2 hours 4 min ago
Joined: 11/29/2017 - 12:34
Posts: 4738
Location: Canada

I’d like to help you X3, but I live in Quebec, and shipping would cost quite a bit.

So, until I come to France this summer to hand you some 351Ds, I wish you good luck.

My very own high current Beryllium Copper springs Gen 3:
http://budgetlightforum.com/node/67401
Liitokala Aliexpress Stores Battery Fraud: http://budgetlightforum.com/node/60547

Billy X
Billy X's picture
Offline
Last seen: 2 days 14 hours ago
Joined: 02/03/2013 - 05:50
Posts: 557
Location: South of France

I had 4 reserved for a Nightfighter 40S,but Led4Power may be stocking 90 cri 3v MZ’s,so I can do up to 4 LH351D’s.

-X3-
-X3-'s picture
Offline
Last seen: 12 hours 3 min ago
Joined: 07/16/2014 - 03:28
Posts: 2688
Location: France, Angers

LOL I wasn’t expecting that much help !
I’m underestimating BLF though, this place has proven more than once to be filled by big hearted people Smile
Please give me your price, including shipping via PM Big Smile

"-X3-, is there any place in your house without a flashlight ?" 

My Flashlight public album (mods, emitter swaps, eye candy)

My reviews channel (French language, Olight, Thorfire, Sofirn, Lumintop : 60+ lights tested)

My personal channel (including Olight SR mini, S1, S2, S1A and S-mini disassembly)

M4DM4X blog, saves you $$$ 

muellihenry
muellihenry's picture
Offline
Last seen: 2 days 8 hours ago
Joined: 08/15/2015 - 08:58
Posts: 100
Location: Deutschland

Also with me the Led’s have arrived now! Very nice light color, exactly my taste. Thumbs Up

Thank you again !!!!

-X3-
-X3-'s picture
Offline
Last seen: 12 hours 3 min ago
Joined: 07/16/2014 - 03:28
Posts: 2688
Location: France, Angers

Billy X wrote:
I had 4 reserved for a Nightfighter 40S,but Led4Power may be stocking 90 cri 3v MZ’s,so I can do up to 4 LH351D’s.

Thanks to Billy X whos spared 4 LEDs with me Thumbs Up

"-X3-, is there any place in your house without a flashlight ?" 

My Flashlight public album (mods, emitter swaps, eye candy)

My reviews channel (French language, Olight, Thorfire, Sofirn, Lumintop : 60+ lights tested)

My personal channel (including Olight SR mini, S1, S2, S1A and S-mini disassembly)

M4DM4X blog, saves you $$$ 

djozz
djozz's picture
Offline
Last seen: 17 hours 58 min ago
Joined: 09/07/2012 - 17:04
Posts: 15302
Location: Amsterdam
Thumbs Up
Boaz
Boaz's picture
Offline
Last seen: 15 hours 26 min ago
Joined: 11/07/2010 - 09:31
Posts: 7022
Location: Birthplace of Aviation

nice

       καὶ τὸ φῶς ἐν τῇ σκοτίᾳ φαίνει καὶ ἡ σκοτία αὐτὸ οὐ κατέλαβεν

                                  https://www.gty.org/

 

    Still selling diffuser film  >…  http://budgetlightforum.com/node/42208

Pages