CRX Stuff for Sale

43 posts / 0 new
Last post

Pages

CRX
CRX's picture
Offline
Last seen: 4 hours 57 min ago
Joined: 04/02/2013 - 15:27
Posts: 2769
Location: Scotland
CRX Stuff for Sale

These are all used/ modified items so are not in perfect condition but the lights work fine and the knives are sharp Wink

If there is more than one interest per item then priority will go to whichever post or PM has the earlier timestamp and they will have a few hours to complete the transaction at my discretion.

Payment via PayPal. (Gift prefered or you add any fees) .

Basic Shipping is included in the quoted price. First class or tracked shipping will be extra.

Upon payment you will receive a confirmation message and I will let you know when the item has shipped which could be up to seven days from that time so some patience is appreciated. Beer

.

.

JetBeam Element E3S SST-40 - ($60) - £45 - ShippedLuminus SST-40 6500K on Noctigon MCPCB
OP Reflector
Copper heatsink
FET +1 MTN driver (Gupp Rev1) Potted
Green GITD bezel
Green tritium vial
Lockout-able
Soft touch forward clicky tail switch
14500 button top compatible (Included)
Length - 86mm
Width - 18mm
Weight - 80g (with cell)
Max - 1500lm

.

CRX 532nm Green LaserForward clicky tail switch
10180 cell compatible (included)
Length - 87mm
Width - 13mm
Weight - 31g (with cell)

.

DQG AAA Clicky Samsung LH351DSamsung LH351D 4000K 90 CRI
Stainless steel
Forward clicky tail switch, Magnetic
GITD glow under TIR optic
Clip included
10440/ AAA cell compatible (Included)
Length - 65mm
Width - 13mm
Weight - 22g (with cell)
Max - 190lm /10sec,- 100lm. Low - 10lm on 10440 cell

.

CRX NU20 Nichia 219CNichia 219C 5000K
ARC glass
OP reflector
GITD top switch
600 mAh lipo cell
Micro USB rechargeable
Magnetic tail
Length - 65mm
Width - 25mm
Depth - 12mm
Weight - 34g
Max - 320lm

.

JetBeam RRT-01 Triple XP-G2 2BSome ano chips & wear, hence the price.
Triple Cree XP-G2 S4 2B on Noctigon (Potted)
10507 TIR
Glow Disc
Magnetic rotary switch
Lockout-able
Green Tritium vial in tail
18350 cell compatible (Protected 18350 Included)
Length - 81mm
Width - 23mm
Weight - 60g (with cell)
Max - 600lm

.

AceBeam H10 MT-G2 HeadlightSome small ano chips
Cree MT-G2 Q0 5000K
OP reflector
Magnetic rotary switch
Momentary on switch
Magnetic tail
Working vlotage: 3V to 6V
Unused original headstrap included
Length - 112mm
Width - 24mm
Weight - 112g (with 18650 cell)
Max - 2000lm (Momentary)
Level 1: 30 lms, 60hours; Level 2: 200lms, 4.5 hours;
Level 3: 500lms, 1.8hours; Level 4: 1000lms, 0.9 hours;

.

SolarForce Gladiator HostForward clicky tail switch

1-4 18650 cell compatible

.

Maratac CR123 Copper Triple Nichia 219CTriple Nichia 219C 5000K D260 83CRI on Noctigon MCPCB
Carclo 10507 TIR
Copper heatsink
Nanjg 105c 3A driver (3 mode)
Green GITD bezel
Green tritium vial
Lockout-able
Reverse clicky tail switch
16340 Compatible (Included)
Length - 70mm
Width - 22mm
Weight - 125g with cell

.

Xeno Cube stainless steel Triple XP-L HITriple Cree XP-L HI v2 1A on Noctigon
10507 TIR
Copper heatsink
MTN 17mm FET driver with Guppydrv Rev1
Forward clicky tail switch
Lockout-able
Leather carry case
Green Tritium vial
Efest 16500 cell compatible (Included)
Length - 101mm
Width - 22mm
Weight - 210g with cell

.

FourSevens Mini Titanium MT-G2Cree MT-G2 P0 5000K on Noctigon
Brushed reflector
MTN 15mm FET driver with Guppydrv Rev1
Reverse clicky tail switch
Lockout-able
Red Tritium vial
Heat anodized purple/blue
2x14250 cell compatible (Included)
Length – 80mm
Width – 18mm
Weight – 51 grams (with cells)

.

DQG Hobi Titanium Seoul Viosys 365nm UVSeoul Viosys Z5 series, 365nm UV LED, CUN66A1B
Hand ground 11mm ZWB2 UV filter
10mm copper SinkPad MCPCB
Hand made brass pill
Mule
Titanium body
Titanium clip
Heat anodized purple/ blue
Direct drive, single mode
Forward clicky key ring tail switch
10180 cell compatible (Included)
Length - 41mm
Width - 13mm
Weight - 16g with cell & clip

.

DQG  Hobi Titanium Nichia 219C 5000KNichia 219C 5000K
Cyan GITD bezel
TIR optic
Titanium body
Twisty switch, two mode
10180 cell compatible (Included)
Length - 32mm
Width - 13mm
Weight - 15g with cell & clip

.

Olight TC-10 Titanium.XP-L HI v2 5D
Noctigon DTP MCPCB
Aluminium heatsink
MTN 17 FET driver
Guppydrv Rev1 firmware
OP reflector
Reverse clicky tail switch
Green 6mm x 2mm tritium vial
Magnetic side
16340 compatible
Length - 83mm
Width - 22mm
Weight - 75g with cell

.

Lumintop Tool Ti.XP-L HI v2 1A
SinkPad DTP MCPCB
MTN 11 FET driver
Guppydrv Rev1 firmware
OP reflector
Forward clicky magnetic tail switch
Green 6mm x 1.5mm tritium vial
10440 compatible
Length - 74mm
Width - 14mm
Weight - 34g

.

Carbon Fibre MT-G2.MT-G2 Q0 5000K
Noctigon DTP MCPCB
50g brass heatsink
H1A 4 mode driver
OP reflector
Reverse clicky tail switch
Built in 18500 1200 mAh AWT cell
Non serviceable
USB rechargeable
(Must be on lowest mode to charge)
Length - 119mm
Width - 22mm
Weight - 123g

.

Thrunite Ti4 Titanium.XHP50 J4 3C
SinkPad DTP MCPCB
Aluminium heatsink
QTC/ direct drive
OP reflector
Twisty switch
Magnetic tail
Green 6mm x 1.5mm tritium vial
2 x 10250 compatible (included)
Length - 70mm
Width - 14mm
Weight - 28g

.

CRX Brass Kubatan.This light is not meant for extended use, it will heat up very fast.

Single mode Direct drive
XHP50 J4 1A
Brushed reflector
Laminated glass
Soldered MCPCB & Copper pill
Forward clicky tail switch
Red tritium vial in switch
Copper bezel & switch inserts
Brass, copper & steel construction
2 x Efest 10440compatible (Included)
Length – 140mm
Width – 14mm
Weight – 104gm

.

DQG Fairy Brass Red XP-E.XP-E Red
Stock driver (2 mode - 40mA & 450mA)
Twisty switch
2 Red 6mm x 1.5mm tritium vials
10180 compatible
Length - 27mm
Width - 13mm
Weight - 15g with cell

.

CRX Brass KnuckleHead I
XP-G2 1A
DQG 3 Mode integrated PCB
(Always starts on low)
Cool white Mule
Twisty magnetic tail switch
14250 compatible (Included)
Length – 36mm
Width – 24mm
Weight – 88g (with cell)

.

 
 
Edited by: CRX on 09/28/2018 - 23:56
yasenf
Offline
Last seen: 43 min 38 sec ago
Joined: 02/10/2017 - 14:33
Posts: 181
Location: Bulgaria

I will take the mtg2 carbon fiber, PM coming

Mike C
Mike C's picture
Offline
Last seen: 2 months 3 weeks ago
Joined: 01/22/2014 - 08:03
Posts: 2009
Location: Sweden

Darn, no pucks… Oh well, at least you get a free bump.

djozz
djozz's picture
Online
Last seen: 7 min 56 sec ago
Joined: 09/07/2012 - 17:04
Posts: 13303
Location: Amsterdam

Those are great custom lights and knives for great prices!

link to djozz tests 

“I used to think that top environmental problems were biodiversity loss, ecosystem collapse and climate change. I thought that thirty years of good science could address these problems. I was wrong. The top environmental problems are selfishness, greed and apathy, and to deal with these we need a cultural and spiritual transformation. And we scientists don’t know how to do that.”   (Gus Speth)

Agro
Offline
Last seen: 9 hours 12 min ago
Joined: 05/14/2017 - 11:16
Posts: 2726
Location: Ślōnsk

I’ll take Thrunite Ti4. Smile

dave1010
Offline
Last seen: 3 days 7 hours ago
Joined: 07/04/2017 - 02:38
Posts: 16
Location: United Kingdom

Does the Tool come with the pocket clip?

dave1010
Offline
Last seen: 3 days 7 hours ago
Joined: 07/04/2017 - 02:38
Posts: 16
Location: United Kingdom

PM sent for the Lumintop Tool Ti.

sesgum
sesgum's picture
Offline
Last seen: 6 hours 16 min ago
Joined: 01/01/2012 - 14:39
Posts: 1057
Location: New Jersey, US

Olight TC-10 Titanium

Does it have a lighted tail button? If yes, I will take it. It is pretty

CRX
CRX's picture
Offline
Last seen: 4 hours 57 min ago
Joined: 04/02/2013 - 15:27
Posts: 2769
Location: Scotland

sesgum wrote:
Olight TC-10 Titanium

Does it have a lighted tail button? If yes, I will take it. It is pretty


No it’s just GITD
sesgum
sesgum's picture
Offline
Last seen: 6 hours 16 min ago
Joined: 01/01/2012 - 14:39
Posts: 1057
Location: New Jersey, US

Oh I’ll pass. Thanks man.

Magbrite
Offline
Last seen: 2 hours 8 min ago
Joined: 11/17/2014 - 22:51
Posts: 41

I’ll take the tool if available please.

CRX
CRX's picture
Offline
Last seen: 4 hours 57 min ago
Joined: 04/02/2013 - 15:27
Posts: 2769
Location: Scotland

sesgum wrote:
Oh I’ll pass. Thanks man.

No problem. I did attempt one of the Convoy lighted caps but couldn’t get it to work reliably with the FET driver.
Might order an LED4Power tail cap to try Wink
Ford Prefect
Ford Prefect's picture
Offline
Last seen: 5 days 18 hours ago
Joined: 06/13/2011 - 08:07
Posts: 835
Location: Canada, eh!

PM sent re the Kershaw Rake

travis
Offline
Last seen: 8 hours 37 min ago
Joined: 03/19/2012 - 23:54
Posts: 906
Location: SoCal

PM sent about Jetbeam element! Smile

A well regulated Militia, being necessary to the security of a free State, the

right of the people to keep and bear Arms, shall not be infringed.

sesgum
sesgum's picture
Offline
Last seen: 6 hours 16 min ago
Joined: 01/01/2012 - 14:39
Posts: 1057
Location: New Jersey, US
CRX wrote:
sesgum wrote:
Oh I’ll pass. Thanks man.
No problem. I did attempt one of the Convoy lighted caps but couldn’t get it to work reliably with the FET driver. Might order an LED4Power tail cap to try Wink

If you could make it work, and it is still available by any chance, I will for sure take it.

Swib
Offline
Last seen: 7 hours 38 min ago
Joined: 12/31/2015 - 19:21
Posts: 240
Location: Ontario, Canada

I’ll take the Olight as it is.

If you don’t like what it looks like on the wall, take it outside.

DrDevil
DrDevil's picture
Offline
Last seen: 2 hours 20 min ago
Joined: 08/18/2015 - 08:46
Posts: 118
Location: Germany

If still available I would be happy to be the new owner of this beauty little fairy brass red Smile

Geuzzz
Geuzzz's picture
Offline
Last seen: 34 min 23 sec ago
Joined: 10/25/2015 - 10:27
Posts: 622
Location: Netherlands

Very nice lights. Congrats to all buyers Thumbs Up

lampyris
lampyris's picture
Offline
Last seen: 4 months 4 weeks ago
Joined: 11/29/2015 - 12:36
Posts: 167
Location: South Downs, UK

Hi CRX, I would like to buy the Kershaw speed bump, please send PP details and money will appear!

PS how much for the Stratis Lumin??? Cash

WillyD
Offline
Last seen: 6 days 5 hours ago
Joined: 10/10/2012 - 15:55
Posts: 725
Location: Ohio

As always, you have some very nice items there. Good luck with the sales! For now, I’m going to keep holding out ‘till you eventually give me one Thumbs UpWink

CRX
CRX's picture
Offline
Last seen: 4 hours 57 min ago
Joined: 04/02/2013 - 15:27
Posts: 2769
Location: Scotland

lampyris wrote:
Hi CRX, I would like to buy the Kershaw speed bump, please send PP details and money will appear!
You got it! Thumbs Up

lampyris wrote:
PS how much for the Stratis Lumina??? Cash

I will let it go for cost Big Smile £1200
DrDevil
DrDevil's picture
Offline
Last seen: 2 hours 20 min ago
Joined: 08/18/2015 - 08:46
Posts: 118
Location: Germany

Received the fairy brass in red today Love

This is really a good piece of craft work

And it makes some real good light (in red) Smile

Thank´s a lot CRX Thumbs Up

Agro
Offline
Last seen: 9 hours 12 min ago
Joined: 05/14/2017 - 11:16
Posts: 2726
Location: Ślōnsk

Received my Thrunite today.
In many ways this is a unique light in my collection:

  • my first CRX light
  • my first Titanium light
  • my first XHP50 light
  • my first 10250 light
  • my fist light with tritium
  • my floodiest light

It was not easy to remove the inner cell, but I succeeded. Both cells at 4.19V, ready to play.
Nice hand warmer, actually brighter than I expected.
I love the look too.
I had too little time for it though….

It’s now in the fridge, waiting for another use.

Thank you CRX!

Ozythemandias
Offline
Last seen: 4 days 14 hours ago
Joined: 09/21/2016 - 08:33
Posts: 254

I want a CRX light

Agro
Offline
Last seen: 9 hours 12 min ago
Joined: 05/14/2017 - 11:16
Posts: 2726
Location: Ślōnsk

I store all batteries in the fridge. Sometimes with hosts.
Well, batteries are my biggest worry about this Ti4. Because when they die (or just weaken much) I won’t be able to get a worthy replacement. Sad

CRX
CRX's picture
Offline
Last seen: 4 hours 57 min ago
Joined: 04/02/2013 - 15:27
Posts: 2769
Location: Scotland

Oh, I thought you meant to cool it down Big Smile

I have a couple 10250 nukes spare to sell, send me a message if you think you need them Thumbs Up

fonfan
Offline
Last seen: 5 hours 22 min ago
Joined: 08/13/2015 - 19:44
Posts: 208
Location: RF SPb

Received CRX lights today, again. Nice mods.

WANTED Zebralights. My flashlights

Ford Prefect
Ford Prefect's picture
Offline
Last seen: 5 days 18 hours ago
Joined: 06/13/2011 - 08:07
Posts: 835
Location: Canada, eh!

Really late post on this but CRX deserves the bump and the “props”

I purchased the Kershaw Rake from him and it was shipped promptly and very well packed with a little treat inside (thanks for that surprise!). The knife was in fantastic condition and exactly as he described. He even took the time to tighten the pivot enough so that the knife, if inspected, wouldn’t have any assisted opening action (canada customs are getting sticky about this). Thanks again CRX and sorry about the delay.

Cheers,
Ford Prefect

CRX
CRX's picture
Offline
Last seen: 4 hours 57 min ago
Joined: 04/02/2013 - 15:27
Posts: 2769
Location: Scotland

Some more lights listed in the OP

pinkpanda3310
pinkpanda3310's picture
Offline
Last seen: 16 hours 3 min ago
Joined: 12/28/2013 - 08:45
Posts: 1623
Location: Perth

OMG that RRT-01 looks right up my ally Love

I don’t need it. I don’t need it. I don’t need it. I don’t need it…..

MascaratumB
MascaratumB's picture
Offline
Last seen: 6 hours 38 min ago
Joined: 10/29/2016 - 12:12
Posts: 2521
Location: Portugal
CRX wrote:
Some more lights listed in the “OP”:http://budgetlightforum.com/node/59894

PM incoming Big Smile

REVIEWS : Amutorch S3 /  AM S3 vs Neal 219c  /  Amutorch AM30 / Nitefox UT20 / Sofirn SF14 & SP10A / Sofirn SP32A / Sofirn SP10B / Odepro KL52 / Acebeam H20 / SS AAA / Wuben TO10R / BlitzWolf BW-ET1 / Odepro B018 / DQG Slim Ti / XTAR PB2 Charger / Nitefox ES10K / Nitefox K3 / Amutorch AX1 / Amutorch VG10 / Olight M2R Warrior  / OTR M1

Mods and tricks: 1 / 2 / 3 / 4 / 5 / 6 / 7     Convoy S2+ TIR Lenses: XML2 / XPL-HI     Others: Convoy S2+ Mini (Biscotti 3 & 1*7135)     Sofirn K6 Discussion: 1 / 2 / 3    Triple TIR & XP-G2                   MY GIVEAWAY (FW3A) = ACTIVE

DB Custom said: "Hide your billfold, cut up your credit cards... you're a perfect candidate for full blown flashaholism and will soon need dedicated flashlight cabinets. [...] Have fun! Modding is next... :P" 

 

Pages